Whirlpool AWO/D 4520P INSTRUCTION FOR USE

GB AWO/D 4520P

PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage
and react appropriately, e.g.:

B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication

Care

Labels

Cotton

60 - 95 °C

Cotton

40 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Programme

Bawe³niane

Bawe³niane

Syntetyczne

30 - 40 - 60 °C

Codzienne

60 - 95 °C

40 °C

Delikatne

30 - 40 °C

40 °C

C
D

A

B

H

I

E

Max.
Load

- for temperature selection, respect the manufacturer's recommendations on the
care label

kg

6.0
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts

etc. made of cotton and linen.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

5.0

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

2.5
Trevira), polyamide (Perlon, Nylon) or blends with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes

Type of wash / Notes

F

Detergents and Additives Special options Max

Pre-

wash

Wash

Yes

i

Yes

i

Yes

i

J

Main

1)

1)

1)

K

Softener

i i

i i

i i

i i

Start
delay

Opóźnienie

startu

2)

2)

2)

2)

E. Programme selector
F. “Start/Pause” button
G. Spin speed selector
H. Programme sequence indicator

I. “Reset” button
J. “Start delay ” button

G

Eco

Eco

i i i i i i

i i i i i i

–

– –

K. Time display

Pre-

wash

Pranie

wstêpne

Easy

ironing

Bez

zanieceń

i

i i i i

Intensive

rinse

Super

p³ukanie

– –

Rinse

hold

Stop

p³ukanie

i i

Variable

spin

Wirowanie

Spin

Speed

rpm

1200

1000

1000

1200

3)

3)

Quick wash

30 °C

Wool

20 - 40 °C

Handwash

30 - 40 °C

Rinse & Spin

Spin

Gentle Spin

Drain

i : option / Yes : dosing required

1)

Do not use liquid detergent for the main wash when activating the “Prewash” option.

2)

Do not use liquid detergent when activating “Start delay” option.

3)

For improved garment care spin speed is restricted in these programmes.

Program szybki

30 °C

We³niane

20 - 40 °C

Pranie rêczne

30 - 40 °C

P³ukanie i Wirowanie

Wirowanie

Delikatne wirowanie

Wypompowanie

– 6.0 Same as the last rinse and the final spin in the “Cotton” programme. – –

– 6.0

– 1.0

– –

Shortly worn outer clothing made of cotton, polyester, polyamide and blends

3.0
with cotton.

Only woollens with a felt-free finish, labelled with the woolmark and identified

1.0

as machine washable.

If you select “Rinse hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

1.0

If you select “Rinse hold” do not leave items to soak for too long. A very gentle spin
is used in this programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
programme.

In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse
hold”.

– Yes

– Yes

– Yes

– – –

– – –

i i

i i

i i

i i

2)

– – – –

2)

– – – –

2)

– – – –

– – –

i

i

– – – – –

– – – – –

i i

i i

i i

i i i

1200

1000

400

1200

1200

i

1000

i

– – – – – – – – – – –

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01006

3)

3)

3)

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)*
Cotton 95 6.0 59** 1.90 2:00
Cotton 60 6.0 49 1.14 2:10

Cotton with “Eco”*** 60 6.0 49 1.02 2:20

Cotton 40 5.0 56 0.70 2:00

Synthetics 60 2.5 50** 0.80 1:35
Synthetics 40 2.5 46 0.50 1:20

Delicates 30 1.5 60 0.50 0:45

Daily load 40 3.0 41 0.50 1:00

Quick wash 30 3.0 41 0.40 0:30

Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Handwash 30 1.0 45 0.40 0:40

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.
* The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water
out.
*** Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME

Add detergents as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.

1. Turn the programme selector to the desired
programme and temperature.

2. The time display shows the duration of the chosen
programme (in hours and minutes), and the
“Start/Pause” indication lamp is flashing.

3. The indication lamp of the predefined spin speed
lights up.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.

“Eco” button

• With modified temperature profile and a slightly

prologned washing duration, the optimum
combination of excellent washingresult and even
lower energy consumption is achieved.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by
approximately 15 min.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics”

and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun
very gently.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helps people with
allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without

pregressing to the final spin cycle to avoid creasing
and prevent colours from changing.

• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.

• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
Note: The programme stops to “Rinse hold” at the
time the “Rinse hold” lights in the preogramme
sequence indication is on. The indication lamp next
to the “Start/Pause” button flashes.

Terminate the “Rinse hold” option:

• Press the “Start/Pause” button; the programme

will terminate automatically with the final spin cycle
for the present wash programme.

• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme
and press the “Start/Pause” button.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay

time by 1 to 23 hours.

• Press the “Start/Pause” button.
The indication light next to the “Start delay” button
lights up and the countdown of the delay time begins.

• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.

• Once having pressed the “Start/Pause” button, the
number of hours preselected can be reduced by
pressing again the “Start delay” button.

To cancel the “Start delay”
..before you press the “Start/Pause” button:

• Turn the programme selector to another position or
press the “Reset” button.
..after having pressed the “Start/Pause” button:

• Press the “Reset” button for at least 3 seconds - the

start delay time disappears from the time display.

PROGRAMME START

Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
The time display shows the remaining programme
time. Due to variations in load and temperature of inlet
water, the remaining time is newly calculated in certain
programme phases. If this is the case, an animation
appears on the time display.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show the the door can be opened. As long
as a wash programme is running, the door remains
locked and must on no account be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Cancel (Reset) a running
programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned: in the
latter case refer to the Instructions for Use (“Removing
the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator

are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O”
position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the
programme. The light flashes.

2. Select the new programme (with temperature), any
options and another spin speed if you want.

3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END

The “Reset” button cancels a programme before the
end.

• Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door
can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01006