Whirlpool AWO/D 451251 INSTRUCTION FOR USE
GB
PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage
and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Care
Programme
Cotton
40 - 60 - 95 °C
SuperEco
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
40-60-95 °C
60 °C
30-40-60 °C
30-40 °C
Labels
H
C
D
J
E
Max.
Load
kg
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
5.0
of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and/or linen.
Offers highest economy in energy consumption by prolonged wash duration. Ideal to be run
5.0
overnight to additionally profit from the more favourable energy rates.
To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the
morning, or define programme start with “Start Delay” accordingly.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
2.5
polyamide (Perlon, Nylon) or blends with cotton.
1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.
- respect the manufacturer's recommendations on the care label
Type of wash / Notes
E. Programme selector
A
B
I
F. “Start/Pause” button
G. “Variable spin” button
H. Programme sequence indicator
I. “Reset” button
J. “Start delay ” button
F
Detergents and Additives Special options Max
Pre-
Main
wash
Wash
Yes
– Yes
Yes
Yes
G
Softener Start
delay
Pre-
wash
– –
Clean+ Intensive
rinse
– – –
Easy
ironing
–
Variable
spin
Spin
Speed
rpm
Max.
Max.
1000
1000
1)
1)
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Lingerie
30 °C
Rinse & Spin – 5.0 Same as the last rinse and the final spin in the “Cotton” programme. – –
Spin – 5.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – –
Drain – – Drain only - no spinning – – –
: option / Yes : dosing required
1)
For improved garment care spin speed is restricted in these programmes.
40 °C
30 °C
- 40 °C
40 °C
30 °C
3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes
3.0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. – Yes
1.0 Only woollens labelled with the woolmark and identified as machine washable. – Yes
1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”. – Yes
This programme is particurarly suitable to treat delicate lingerie (use of laundry net
1.0
strongly recommended).
– Yes
– –
– – – –
– – – –
– – – –
– – – –
– –
– – – –
– – – – – –
Whirlpool is a registered trademark of Whirlpool USA.
–
Max.
Max.
1000
400
400
Max.
Max.
5019 301 01117
1)
1)
1)
CONSUMPTION DATA
Programme
Cotton 95 5.0 49 * 1.90 2:00
Cotton ** 60 5.0 44 0,85 2:20
Cotton 40 5.0 44 0.60 2:00
Super Eco 60 5.0 47 0.60 4:00
Synthetics 60 2.5 50 * 0.70 1:30
Synthetics 40 2.5 45 0.55 1:15
Delicates 30 1.5 50 0.50 0:45
Daily load 40 3.0 45 0.45 1:00
Quick wash 30 3.0 40 0.40 0:30
Wool
Handwash 40 1.0 45 0.60 0:40
Lingerie 30 1.0 45 0.50 0:36
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.
*
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add detergents as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
Turn the programme selector to the desired
programme and temperature.
The “Start/Pause” indication lamp is blinking and the
indication lamp of the predefined spin speed lights up.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the “Prewash” option.
Temperature
(°C)
40 1.0 55 0.60 0:45
“Clean+” button
• Choose this option if you use an in-wash additive
for stain removal (powder, for example “Vanish”)
- it will optimize the additive’s efficiency to get
better wash performance and stain removal.
Load
(kg)
Water
(l)
Energy
(kWh)
• Selectable for programmes “
“Synthetics”;
choose temperature of 30 or 40°C
Approx. Programme
(hours : minutes)
Cotton” and
and use with maximum load.
• Add an appropriate amount of in-wash additive for
stain removal (powder) to the main wash chamber,
together with your detergent (only use powder
detergent with this option).
Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15
minutes.
• Appropriate for use of stain removers and
bleaches on oxygen basis. Chlorine or perborate
bleaches must not be used!
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
soft water, washing baby linen and helps people with
allergies.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics”
and “Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun
very gently.
“Variable spin”
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
button
Duration
START DELAY
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
activating “Start delay” option.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay
time by 1, 3, 6, 9 or 12 hours.
• Press the “Start/Pause” button.
The indication neto to the “Start delay” button lights
up and goes off when the programme starts.
• Once having pressed the “Start/Pause” button, the
countdown of the time delay begins. When the
programme starts, the start delay indicator lights
goes off and is replaced by the programme sequence
indications.
• After the “Start/Pause button has been pressed,
the number of hours preselected can be reduced by
pressing again the “Start delay” button.
To cancel the “Start delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another position or
press the “Reset” button.
..after having pressed the “Start/Pause” button:
• Press the “Reset” button for at least 3 second - the
start delay indicator light goes out.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
When the programme phrase is finised, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show the the door can be opened. As long
as a wash programme is running, the door remains
locked and must on no account be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Cancel (Reset) a running
programme before the end”.
Do not use liquid detergent when
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned: in the
latter case refer to the Instructions for Use (“Removing
the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light blinks.
2. Select the new programme (with temperature), any
options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before the
end.
• Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door can
be opened.
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01117
Loading...