Whirlpool AWO/D 40100 INSTRUCTION FOR USE

GB PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Care

Programme

Cotton with

prewash 95 °C

Cotton/

Antibacterial

95 °C

Cotton

40 - 60 °C

Cotton Rapid

60 °C

Synthetics with prewash 60 °C

Βαμβακερά

95 °C

Βαμβακερά

95 °C

Βαμβακερά

40 - 60 °C

Βαμβακερά

Γρήγορο 60 °C

Συνθετικά

60 °C

Labels

C D

Max. Load

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen,

5.0 underwear, shirts etc.).

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add

5.0

an oxygenbased bleach additive which can be used at 95°C. This programme eliminates bacteria, ensuring sanitization of your laundry.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and

5.0 linen.

Normally to heavily soiled cotton laundry washable at 60°C.

5.0

Faster alternative to “Cotton” programme for washing your cotton laundry at 60°C.

Heavily soiled laundry made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with

2.5 cotton.

- respect the manufacturer's recommendations on the care label

Type of wash / Notes

E. Programme selector

F. “ Start(Pause)” button

G. Programme sequence indicator

H. “Reset” button

Detergents and Additives Special options

Pre-

Main

wash

Yes Yes

– Yes

Yes Yes

Softener Spin speed

Wash

reduction

Μείωση

στροφών

i i i

Rinse

hold

Ακύρωση

ξεβγάλματος

Max.

Spin Speed

rpm

Max.

Synthetics

30 - 40 - 60 °C

Delicates

30 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Rinse & Spin

Spin

Short Spin

Drain

i : option / Yes : dosing required

Do not use liquid detergents.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Συνθετικά

30 - 40 - 60 °C

Ευαίσθητα

30 °C

Γρήγορη πλύση

30 °C

Μάλλινα

Κρύο - 40 °C

Πλύσιμο στο χέρι

40 °C

Ξέβγαλμα &

Στύψιμο

Ήπιο στύψιμο

Αποστράγγιση

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends

2.5 with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. – Yes

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

3.0

Brief programme to refresh your laundry.

1.0 Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable. – Yes

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

1.0

Care programme with a very gentle spin

– 5.0 Same as the last rinse and the final spin in the “Cotton” programme. – –

– 5.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – –

– 1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. – – –

– – Drain only - no spinning. Alternative method of terminating programme after “Rinse hold” – – – – – –

– Yes

i i i

i i

i i i

Whirlpool is a registered trademark of Whirlpool USA.

– Max.

Max.

400

Max.

5019 301 01275

CONSUMPTION DATA

Programme

Cotton/Antibacterial 95 5.0 53 * 1.70 2:00

Cotton ** 60 5.0 44 0.75 4 :00 Cotton ** 60

Cotton 40 5.0 49 0.60 2:45

Cotton ** 40 2.5 32 0.55 2:30

Cotton Rapid 60

Synthetics 60 2.5 50 * 0.70 1:30 Synthetics 40 2.5 45 0.50 1:15

Delicates 30

Quick wash 30 3.0 40 0.40 0:30

Wool 40 1.0 55 0.60 0:45

Handwash 40 1.0 45 0.60 0:40

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). *

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Reference programmes for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Temperature

(°C)

Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

• Turn the programme selector to the desired programme and temperature.

• The indication lamp next to “Start(Pause)” button blinks.

Load

(kg)

2.5 32

5.0

1.5

Water

(l)

44 0.85

50 0.50

Energy

(kWh)

0.65

Approx. Programme

Duration

(hours : minutes)

“Rinse hold” button

• The laundry remains in the last rinse water without pregressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics” and “Delicates”.

•

It is particularly useful if you want to postpone

spinning to a later time, or if you want to drain only.

• If you select “Rinse hold” do not leave items to soak for too long.

2:20

2:30

0:45

Note: The programme stops to “Rinse hold” at

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective

the time the “Rinse hold” lights in the programme sequence indication is on. The indication lamp

next to the “Start(Pause)” button blinks. indication lamp lights up. If the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

Terminate the “Rinse hold” option :

• Press the “Start(Pause)” button ; the programme

will terminate automatically with the final spin

cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the

“Spin speed reduction” button

• Reduces the predetermined automatic

programme selector to the “Drain” programme

and press the “Start(Pause)” button . maximum spin speed to treat your laundry more gently.

PROGRAMME START

Open the tap and press the “Start(Pause)” button. The indication lamp next to the “Start

(Pause)” button lights up. The programme

sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset)” a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start(Pause)” button to pause the programme. The light blinks.

2. Select the new programme (with temperature), and any options if you want.

3. Press the “Start(Pause)” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few

seconds.

Any existing water is drained out. It may last some time until the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01275