Whirlpool AWO 4461 INSTRUCTION FOR USE
GB
PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped
with automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Care
Programme
Labels
Cotton
with prewash 95 °C
Cotton
40 - 60 - 95 °C
Synthetics
with prewash
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
CottonEco
60 °C
Rinse & Spin
Spin
Gentle Spin
Drain
Max.
Load
kg
6.0
6.0
2.5
2.5
1.5
3.0
1.0
1.0
6.0
– 6.0
– 6.0
– 1.0
– –
G
C
D
A
B
H
E
Type of wash / Notes
Respect the manufacturer's recommendations on the care label
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen,
underwear, shirts etc.).
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton
and linen.
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
Heavily soiled and robust laundry washable at 60°C such as bed linenm table linen towels etc..
The extended programme dutation enables economic energy and water consumption while maintaining
good washing results.
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Water is drained only without any spinning.
F
E. Programme selector
F. “Start/Pause” button
G. Programme sequence indicator
H. “Reset” button
Detergents and Additives Special options Spin
Pre-
wash
Main
Softener Intesive
Wash
Yes Yes
– Yes
Yes Yes
– Yes
– Yes
– Yes
– Yes
– Yes
– Yes
– –
– – – –
– – – –
– – – – – –
1)
1)
rinse
Spin speed
reduction
1x00 / x00
Rpm
–
–
–
–
Speed
rpm
max.
max.
1000
1000
1000
max.
1000
400
max.
max.
max.
1000
2)
2)
2)
2)
2)
2)
: option / Yes : dosing required
1)
Do not use liquid detergent.
2)
For improved garment care spin speed is restricted in these programmes.
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01194
CONSUMPTION DATA
Programme
Cotton
Cotton **
Cotton
Synthetics
Synthetics
Delicates
Quick wash
Wool
Handwash
Cotton Eco
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456.
Consumption data in the h
and temperature, the load and the type of wash.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
the water out.
** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Temperature
Selector
(°C)
95 6,0 59 * 1.90 2:00
60 6,0 49 1.02 2:20
40 6,0 54 0.65 2:00
60 2.5 50 * 0.70 1:30
40 2.5 45 0.55 1:15
30 1.5 50 0.50 0:45
30 3.0 40 0.40 0:30
40 1.0 55 0.60 0:45
40 1.0 45 0.60 0:40
60 6.0 49 0.78 4:00
ome may vary with respect to the values in the table in relation to the water supply pressure
Add detergents as indicated on the front page
and as described in your Instructions for Use.
Close the door and turn the programme
selector to the desired programme and
temperature. The indication lamp next to the
“Start/Pause”
SELECT ANY DESIRED OPTION
button blinks.
Push the button(s) of any option(s) desired - the
Load
(kg)
Water
(l)
“Intensive rinse” button
• More water is added and rinse cycle is
prolonged.
• This option is particularly suitable for areas
with very soft water, washing baby linen and
helps people with allergies.
“Spin speed reduction” button
• Reduces the predermined automatic
maximum spin speed to treat your laundry
more gently.
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)
respective indication lamp lights up.
When the combination of programme and
additional option(s) is not possible, the
indication lights switch off automatically.
Unsuitable combinations of options are
deselected automatically.
PROGRAMME START
Open the tap and press the “Start/Pause”
button. The indication lamp next to the
“Start/Pause”
button lights up. The
programme sequence indicator shows the
current programme phase, running from left to
right through Wash, Rinse, Spin/Drain.
When the programme phrase is finised, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme,
the lamp lights to show the the door can be
opened. As long as a wash programme is
running, the door remains locked and must on
no account be forced open. In case you have
an urgent need to open it during a running
programme, refer to “Cancel (Reset) a running
programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be
caused by a fault in an electrical component.
Refer to the “Troubleshooting Guide” in your
“Instructions for Use”; if the fault persists,
contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water
supply. Open the water tap: if the indications
still lights up, refer to the “Troubleshooting
Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check
whether the drain hose is kinked or the filter
must be cleaned: in the latter case refer to the
Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause
the programme. The light blinks.
2. Select the new programme (with
temperature), any options and another spin
speed if you want.
3. Press the “Start/Pause”
button again.
The new programme continues at the same
position where the previous programme
was interrupted. Do not add detergent for
this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme
before the end.
•
Press the “Reset” button for at least 3
seconds
.
Any existing water is drained out before the
door can be opened.
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01194
Loading...