Whirlpool AWM 6081/1 INSTRUCTION FOR USE

3gb05412.fm Page 1 Wednesday, September 11, 2002 9:31 AM

;

AWM 6081/1

A. Programme Sequence Indicator B. “Start/Pause” Button C. “Door Open” Indication D. “Spin Speed Reduction” Button

Programme

Cotton/

Coloured cotton

Synthetics

Daily

Short

Care

Labels

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

Normally soiled blouses , shirt s , over alls etc . m ad e o f polyester (D i olen, Trevira), polyamide (P erlon, Nylo n) or blen ds with cotton.

Slightly to norm ally soiled te xt iles m ad e o f cotton an d/o r synthetics. Shortly worn outer clothin g m ade of cotton, polyester, polya mi d e an d blen ds

with cotton.

Type of wash/Notes

Load Detergents and additives Special options

Max. Kg

Normal

6.2

Rapid 3.0

Normal

2.5

Rapid 1.5

3.0

Bleach Softener Main

❉❉

—

❉

❉ ❉

Wash

Yes

Yes — Yes —

Pre-

Eco Rapid Prewash Intensive

wash

❉❉❉ ❉ ❉ ❉ ❉

❉❉❉ ❉ ❉ ❉

—— —

Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

❉

: optional / Yes : dosing required

For improved garment care spin speed is restricted to 600 rpm in this programme.

For improved garment care spin speed is null in this programme.

Programme

Selector

95°,60°,40°

60°,40°

Rinse

Hold

Spin Speed

Reduction

❉

❉❉❉ ❉❉❉

Max

Spin

Speed

rpm

800

600

800

Delicates

Wool

Silk

Rinse + spin —

Spin —

Gentle spin —

Drain —

Black process 45.0° 100.0 LPI

Curtains and delicate clothing, dresses skirts, shirts and blouses.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles m ad e of lin en, silk, wool and viscose m arked as “han d washable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning.

Same as the last rinse and the final spin in the “Coloured Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the

“Coloured Cotton” programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool”

programme. Drain only - no spinning. Alternative method of terminating programme after

“Rinse Hold”.

1.5

1.0

6.2

1.5

—

——————— — —

——————— — — —

Yes

❉

Yes —

❉

Yes —

❉

———— —

❉

——

❉

—— — —

❉

—

❉

❉❉❉

Whirlpool is a registered trademark of Whirlpool USA

❉

—

❉

5019 301 05412

600

800

600

40°,30°

30°,20°

30°

—

3gb05412.fm Page 2 Wednesday, September 11, 2002 9:31 AM

CONSUMPTION DATA

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx.

Programme

Duration

(hours : minutes)* Cotton 90 5.0 49** 1.70 2:00 Cotton 60 5.0 44 0.95 2:00 Cotton 40 5.0 44 0.60 2:05

Synthetics 60 2.5 55 0.80 1:30 Synthetics 40 2.5 55 0.60 1:20

Daily 40 3.0 47 0.48 1:00 Short 30 3.0 37 0.40 0:30

Delicates 40 1.5 60 0.60 0:45

Wool 30 1.0 60 0.30 0:40

Silk 30 1.0 45 0.30 0:40

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of th e main wash cycle, before the pump dr ains th e

water out.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1. Turn the

programme selector knob

to the

desired programme and temperature.

2. After taking some seconds for calculating, the pilot lamp of the

“Start/Pause”

button is flashing.

3. The programme sequence and the predefined spin speed indication corresponding to the selected programme lights up.

“Eco Wash” button

• The duration of the wash is extended and the temperature reduced to save up to 40% of energy but maintaining good washing results.

“Rapid Wash” button

• For quick, economical washes. Ideal for minimum loads of lightly-soiled articles.

Note:

reduce the detergent quantity.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle time increases approximately 15 min.

SELECT ANY DESIRED OPTION

Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the

indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Intensive Rinse” button

• More water and a long er tim e in rin se cycle is added.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressi n g to th e fin a l spin cycle to avoid creasing an d prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics”, “Daily” and “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Note:

The programme stops to “Rinse Hold” at the time the “Rinse Hold” light in the programme flow indication is on.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain” programme and pr ess the

“Start/Pause”

button

again when flashing.

“Spin Speed Reduction” button

• Every programme has an automatic predefined

maximum spin speed.

• Press the button to set another spin speed.

• If the spin speed “0” is selected, the final

spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

PROGRAMME START

Open the tap and press the The pilot lamp of the

“Start/Pause”

button.

button lights up.

The indicator lamps show the sequence reached in the programme. After starting the programme, the sequence indication runs from left to right through Wash, Rinse, Spin.

When the sequence of the programme is finished the corresponding lamp goes out.

DOOR LOCK

The door can be opened when the “Door Open” indication is on.

PROGRAMME END

• All the lights of the programme sequence indication are off.

1. Turn the programme selector to the

“”

position.

2. Turn the water supply tap off.

3. Open the door and unload the machine.

4. Close the tap and leave the door ajar to allow

the drum to dry out.

CHANGE THE PROGRAMME, OPTIONS AFTER PROGRAMME START

1. Press the

“Start/Pause”

button to pause the

programme. The light flashes.

2. Select the new programme (with temperature),

any options and another spin speed if you want.

3. Press the

“Start/Pause”

button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A PROGRAMME BEFORE THE END

1. Press the

“Start/Pause”

button to pause the programme. The light flashes.

2. Set the programme selector to “Drain”. The spin indicators show

“0”

and the remaining

time shows “0:02”.

3. Press the

“Start/Pause”

button to start the

drain programme.

Black process 45.0° 100.0 LPI

Whirlpool is a registered trademark of Whirlpool USA

5019 301 05412

Whirlpool AWM 6081/1 INSTRUCTION FOR USE

Specifications and Main Features

Frequently Asked Questions

User Manual