Whirlpool AWM 6075 INSTRUCTION FOR USE

3gb05493.fm Page 1 Tuesday, June 17, 2003 2:47 PM
GB
;
AWM 6075
A. Programme Sequence Indicator B. “Start/Pause” Button C. “Door Open” Indication D. “Spin Speed Reduction” Button
Programme
Cotton/
Coloured cotton
Synthetics
Daily
Short
Care
Labels
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Normally soiled blouses , shirts , over alls etc . m ad e o f polyester (Di olen, Trevira), p olyami d e (Perlon, Nylon) or blends with cotton.
Slightly to normally soiled textiles mad e of cotton an d/or syn t h eti cs . Shortly worn outer clothin g ma d e o f cotton, po lyester, polyamide and
blends with cotton.
Type of wash/Not es
A
Max Load
Kg
Normal 7.0
Rapid 3.0
Normal 2.5
Rapid 1.5
3.0
3.0
CB
D
Bleach Softener Main Wash Prewash
❉❉
❉ ❉
Yes
Yes
Yes — Yes
❉❉❉❉❉ ❉
❉❉❉❉❉
Rapid
— —
Prewash Intensive
Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
: optional / Yes : dosing required
1
For improved garment care spin speed is restricted to 600 rpm in this programme.
2
For improved garment care spin speed is null in this programme.
Rinse
Rinse
Hold
Spin Speed
Reduction
Max
Spin
Speed
rpm
750
Programme
Selector
95°,60°,40°
1)
❉❉❉ ❉❉❉
600
750
750
1)
60°,40°
Delicates
Wool
Silk
Rinse + spin
Spin
Gentle spin
Drain
Black process 45.0° 100.0 LPI
Curtains and delicate clothing, dresses skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine w ashable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles m ade o f linen, silk, wool and viscose m ark ed as “hand w ashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
Same as the last rinse and the final spin in the “Coloured Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Coloured Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.
1.5
1.0
1.0
7.0
7.0
1.5
—— — —
—— — —
—— — —
Yes
Yes
Yes
——
— — — —
——
——
———
———
——— —
❉❉❉
Whirlpool is a registered trademark of Whirlpool USA.
1)
1)
1)
5019 301 05493
600
600
0
750
750
600
1)
40°,30°
1)
30°,20°
2)
30°
1)
3gb05493.fm Page 2 Tuesday, June 17, 2003 2:47 PM
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx.
Programme
Duration
(hours : minutes)* Cotton 95 6.0 54** 1.90 2:00 Cotton 60 6.0 49 1.14 2:20 Cotton 40 5.0 44 0.60 2:05
Synthetics 60 2.5 55 0.80 1:30 Synthetics 40 2.5 55 0.60 1:20
Daily 40 3.0 45 0.50 1:00 Short 30 3.0 37 0.40 0:30
Delicates 40 1.5 60 0.60 0:45
Wool 30 1.0 60 0.30 0:40
Silk 30 1.0 45 0.30 0:40
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the
household conditions applicable at that time.
**To redu ce the water temperature , som e cold water is ad ded at th e end of th e main w ash cycle, bef ore th e pump dr ains the water out.
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add the detergent as described in the programme table or in the chapter “Detergents and Additives” in the booklet.
1. Turn the
programme selector knob
to the
desired programme and temperature.
2. After taking some seconds for calculating, the pilot lamp of the
“Start/Pause”
button is
flashing.
3. The programme sequence and the predefined spin speed indication corresponding to the selected programme lights up.
SELECT ANY DESIRED OPTION
Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Rapid Wash” button
• For quick, economical washes.
• Ideal for minimum loads of lightly-soiled articles.
Note:
reduce the detergent quantity.
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle time increases approximately 15 min.
“Intensive Rinse” button
• More water and a longer time in rinse cycle is added.
• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.
• This option is particularly recommended f or th e programme “Synthetics”, “Daily” and “Delicates”.
• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.
Note:
The programme stops to “Rinse Hold” at the time the “Rinse Hold” light in the programme flow indication is on.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme and pr ess the
“Start/Pause”
button
again when flashing.
“Spin Speed Reduction” button
• Every programme has an automatic predefined
maximum spin speed.
• Press the button to set another spin speed.
• If the spin speed “0” is selected, the final
spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.
PROGRAMME START
Open the tap and press the The pilot lamp of the
“Start/Pause”
“Start/Pause”
button.
button lights
up. The indicator lamps show the sequence reached in
the programme. After starting the programme, the sequence indication runs from left to right through Wash, Rinse, Spin.
When the sequence of the programme is finished the corresponding lamp goes out.
DOOR LOCK
The door can be opened when the “Door Open” indication is on.
PROGRAMME END
• All the lights of the programme sequence indication are off.
1. Turn the programme selector to the
“”
position.
2. Turn the water supply tap off.
3. Open the door and unload the machine.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
CHANGE THE PROGRAMME, OPTIONS AFTER PROGRAMME START
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
CANCEL A PROGRAMME BEFORE THE END
1. Press the
“Start/Pause”
button to pause the programme. The light flashes.
2. Set the programme selector to “Drain”. The spin indicators show
“0”
and the remaining
time shows “0:02”.
3. Press the
“Start/Pause”
button to start the
drain programme.
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 05493
Black process 45.0° 100.0 LPI
Loading...