Whirlpool AWM 6071 INSTRUCTION FOR USE

AWM 6071

A. Programme Sequence Indicator B. “Start/Pause” Button C. “Door Open” Indication D. Temperature Adjusting Buttons E. “Spin Speed Reduction” Button

Programme

Care

Labels

Type of wash/Notes

Max Load

BAC

Detergents and additives Special options

Bleach Softener Main Wash Pre-

wash

Prewash

Intensive

Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

❉

: optional / Yes: dosing required

For improved garment care spin speed is restricted to 500 rpm in this programme.

In this programme default spin speed can be increased till 400 rpm.

Max

Spin

Speed

Rinse

Hold

Spin Speed

Reduction

Programme

Selector

Cotton/

Coloured cotton

Synthetics

Daily

Rapid

Delicates

Wool

Handwash

Rinse + spin —

Spin —

Gentle spin —

Drain —

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetics.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.

Same as the last rinse and the final spin in the “Coloured Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Coloured Cotton” programme.

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

5.0

2.5

3.0

1.5

1.0

5.0

1.5

❉❉

—

——

Yes

❉ ❉ ❉ ❉

❉

———— — —

———— — — —

Yes

Yes —

Yes

Yes —

———

❉❉ ❉ ❉ ❉

❉❉ ❉ ❉

—

❉❉

——

❉❉❉ ❉❉❉

—

❉

❉❉❉

❉

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 10106

rpm

700

500

700

500

400

700

500

—

CONSUMPTION DATA

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx.

Programme

Duration

(hours : minutes)* Cotton 95 4.5 49** 1.70 2:05 Cotton 60 5.0 46 0.95 2:20 Cotton 40 4.5 44 0.60 2:05

Synthetics 60 2.0 55 0.80 1:30 Synthetics 40 2.0 55 0.60 1:20

Daily 40 3.0 44 0.45 1:00

Rapid 30 3.0 37 0.40 0:30

Delicates 30 1.5 60 0.50 0:45

Wool 30 1.0 60 0.30 0:40

Handwash 30 1.0 60 0.30 0:50

Prewash might increase programme duration. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the

water out.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1. Turn the programme selector to the desired programme.

2. The pilot lamp of the

“Start/Pause”

button is

flashing.

3. Select the temperature by pressing “+” or “-” button below the temperature display.

4. Select the spin speed by pressing the spin speed button - the selected spin speed is indicated by the LED.

5. Select any desired option by pressing the option button.

SELECT ANY DESIRED OPTION

Selecting any option the indication lights up. When the combination of options, temperature

and spin speed is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle time increases approximately 15 min.

“Intensive Rinse” button

• More water and a longer time in rinse cycle is added.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics”, “Daily” and “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Note:

The programme stops to “Rinse Hold” at the time the “Rinse Hold” light in the programme flow indication is on.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain” programme and press the

“Start/Pause”

button

again when flashing. You have to press

“Start”

button within 15 seconds after

reselecting the programme.

“Spin Speed Reduction” button

• Every programme has an automatic predefined

maximum spin speed.

• Press the button to set another spin speed.

• If the spin speed “0” is selected, the final

spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

PROGRAMME START

Open the tap and press the The pilot lamp of the

“Start/Pause”

button.

button lights up. The indicator lamps show the sequence reached in the programme. After starting the programme, the sequence indication runs from left to right through Wash, Rinse, Spin.

When the sequence of the programme is finished the corresponding lamp goes out.

DOOR LOCK

The door can be opened when the “Door Open” indication is on.

PROGRAMME END

• All the lights of the programme sequence indication are off.

“”

1. Turn the programme selector to the

position.

2. Turn the water supply tap off.

3. Open the door and unload the machine.

4. Close the tap and leave the door ajar to allow

the drum to dry out.

CHANGE THE PROGRAMME, OPTIONS AFTER PROGRAMME START

1. Press the

“Start/Pause”

button to pause the

programme. The light flashes.

2. Select the new programme (with temperature),

any options and another spin speed if you want.

3. Press the

“Start/Pause”

button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A PROGRAMME BEFORE THE END

1. Press the

“Start/Pause”

button to pause the programme. The light flashes.

2. Set the programme selector to “Drain”. The spin indicators show

3. Press the

“Start/Pause”

“0”

button to start the

drain programme.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 10106