Whirlpool AWM 3082 INSTRUCTION FOR USE

3gb05386.fm Page 1 Tuesday, July 16, 2002 12:02 PM
GB
AWM 3082
A. “On/Off” Button B. “On/Off” Indication
Programme
Cotton with prewash
Synthetics with prewash
Delicates with prewash
Cotton
Cotton short
Daily mixed 60’
Synthetics
Synthetics short
Delicates
Wool
Silk
Rinse + spin
Spin
Gentle spin
Drain
Care
Labels
— —
— —
Type of wash/Notes
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).
Heavily soiled blouses, shirts, overalls etc. made of polyester (Di olen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses. Normally to heavily soiled bed linen, table linen and un derwear, towels, shirts etc. m ade
of cotton and linen.
When you select the “Rapid” option, the “Half Load”, the “Intensive Rinse” and the “Easy Ironing” options cannot be selected.
Normally soiled bed linen, table linen an d un d erwear, towels, shirts etc. m ad e of cotton and linen.
Slightly to normally soiled textiles made of cotton and/or synthetics. Normally to heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
When you select the “Rapid” option, the “Half Load”, the “Intensive Rinse” and the “Easy Ironing” options cannot be selected.
Normally soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses. Only woollens with a felt-free finish, labelled with the woolmark and identified as
machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “han dwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning. With this programme you can add starch and/or fabric softener.
The programme ends with an intensive spin cycle. In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. Drain only - no spinning. Alternative method of terminating programme the synthetic, delicate
and wool programme and for premature removal of the laundry.
BA
During the selected washing programme the programme selector knob moves by steps clock wise through the phases
spin
. Each step takes from some seconds to several
prewash, main wash, rinse and
minutes.
: optional / Yes : dosing required
1)
For improved garment care spin speed is null in this programme.
Max
Load
5.5
2.5
1.5
Normal
5.5
Rapid
3.0
3.0
3.0
Normal
2.5
Rapid
1.5
2.5
1.5
1.0
1.0
5.5
5.5
1.5
kg
Softener Main
❉ ❉
❉ ❉
❉ ❉
Wash
Yes Yes Yes Yes
Yes Yes
Yes
Yes
Yes
Yes
Yes Yes
Yes
Yes
——
Pre-
Half
Load
❉ ❉
Rapid Intensive
— —
Rinse
❉❉❉ ❉ ❉❉❉ ❉
wash
—— —
———
❉❉ ❉ ❉❉ ❉
❉❉❉ ❉
❉❉❉ ❉
❉❉ ❉ ❉❉ ❉
❉❉❉ ❉
——— — ——— —
——— —
❉❉
Rinse
Hold
❉ ❉
Easy
Ironing
Spin Speed
Reduction
— —
—— —
————— ——— ————— ———
Selector
°C
Max. 95° Max. 60°
❉ ❉
❉ ❉
Max. 40° Max. 95°
Rapid
Max. 60° Max. 60°
Max. 60° Max. 60°
Rapid
Max. 60° Max. 60°
Max. 40°
Max. 40°
Max. 30°
— —
————————— —
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05386
Programme
Selector
1 2
3 4
5
6 7
8 9
1)
10
A B
C D
Black process 45.0° 100.0 LPI
3gb05386.fm Page 2 Tuesday, July 16, 2002 12:02 PM
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx.
Programme
Duration
(hours:minutes) Cotton 90 5.5 54 1.90 2:00 Cotton 60 5.5 49 1.04 2:20 Cotton 40 5.0 44 0.60 2:05
Daily mixed 60’ 40 3.0 47 0.48 1:00
Synthetics 60 2.5 55 0.80 1:30 Synthetics 40 2.5 55 0.60 1:20
Delicates 40 1.5 60 0.60 0:45
Wool 40 1.0 60 0.45 0:40
Silk 30 1.0 60 0.30 0:40
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet.
1. Open the tap.
2. Set the
programme selector
to the desired
programme.
3. Set the
temperature selector
to the desired
temperature.
Special options
4.
can be selected.
5. Check that the door is well closed and turn on the washing machine by pressing the
“ON/OFF”
button. The indicator lights up, indicating that the washing machine is on.
SELECT ANY DESIRED OPTION
“Half Load” button
• Reduces water consumpti on, above all d uring rin sing.
• Suitable for lightly-soiled laundry and small loads
(max 3 kg).
Note:
Reduce the detergent quantity.
“Rapid Wash” button
“Intensive Rinse” button
• More water and a longer time in rinse cycle is added.
• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.
• This option is particularly recommended for the programme “Synthetics”, “Daily mixed 60’” and “Delicates”.
• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.
If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme.
• For quick, economical washes.
• Ideal for minimum loads of lightly-soiled articles.
Note:
reduce the detergent quantity.
“Easy Ironing” button
• Can be used together with Cotton, Synthetics and Daily mixed 60’ programmes to make ironing easier.
• Increases the water quantity and the clothes are spun very soft.
“Spin Speed Reduction” button
• Reduces the predete r mined automatic maximum spin speed. In some programmes the maximum final spin speed is limited to go easy on your laundry items. Selection of a higher spin speed is not possible.
PROGRAMME CHANGE
To reselect a programme when a cycle has already begun:
1. Switch off the appliance by pressing the
ON/OFF
” button.
2. Select the new programme.
3. Start the programme by pressing the
ON/OFF
” button.
PROGRAMME END
1. At the end of the programme the programme
selector moves to the stop position.
2. To unload the machine wait for the door to
unlock (about 1 minute).
3. Switch off the appliance, open the door and
take out the laundry.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
NOTES AND INDICAT IONS FOR USE
WATER LEVEL
• It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.
SPIN SPEED CONTROL
• Spin speed may be reduced automatically or may even be excluded in the case of small loads with highly absorbent garments (e.g. bathrobes, bathmat). This control avoids cloth and m achine damag e and excessive vibrations and consequent noise produced by the machine due to load unbalance: by selecting high spin speeds the noise level increases.
MOTOR NOISE
• The running noises of the new, electronically­controlled motor are n ot the s ame as the on es you are used to from your old appliance . Don’t be surprised - modern technology has a modern sound.
CLEANING THE FILTER
• To ensure an impeccable function of the pump, check the filter regular and clean it if necessary.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05386
Black process 45.0° 100.0 LPI
Loading...