Whirlpool AWM 3072 INSTRUCTION FOR USE

3gb05389.fm Page 1 Tuesday, July 16, 2002 12:03 PM

AWM 3072

A. “On/Off” Button B. “On/Off” Indication

Programme

Cotton with prewash

Synthetics with prewash

Delicates with prewash

Cotton

Cotton short

Daily mixed 60’

Synthetics

Synthetics short

Delicates

Wool

Silk

Rinse + spin

Spin

Gentle spin

Drain

Care

Labels

— —

Type of wash/N otes

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

Heavily soiled blouses, shirts, overalls etc. made of polyester (Di olen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses. Normally to heavily soiled bed linen, table linen and un derwear, towels, shirts etc. made of

cotton and linen.

When you select the “Rapid” option, the “Half Load” and the “Intensive Rinse” options cannot be selected.

Normally soiled bed linen, table linen and und erwear, towels, shirts etc. mad e o f cotton and linen.

Slightly to normally soiled textiles made of cotton and/or synthetics. Normally to heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

polyamide (Perlon, Nylon) or blends with cotton.

When you select the “Rapid” option, the “Half Load” and the “Intensive Rinse” options cannot be selected.

Normally soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses. Only woollens with a felt-free finish, labelled with the woolmark and identified as machine

washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “han dwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning. With this programme you can add starch and/or fabric softener.

The programme ends with an intensive spin cycle. In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. Drain only - no spinning. Alternative method of terminating programme the synthetic, delicate and

wool programme and for premature removal of the laundry.

During the selected washing programme the programme selector knob moves by steps clock wise through the phases

spin

. Each step takes from some seconds to several

prewash, main wash, rinse and

minutes.

❉

: optional / Yes : dosing required

For improved garment care spin speed is null in this programme.

Max

Load

5.5

2.5

1.5

Normal

5.5

Rapid

3.0

Normal

2.5

Rapid

1.5

2.5

1.5

1.0

5.5

1.5

Detergents and additives Special options Temperatur e

Softener Main

Wash

❉ ❉

❉

❉ ❉

❉

Yes Yes Yes Yes

Yes Yes

Yes

Yes Yes

Yes

——

—————— — —————— —

Pre-

Half

wash

Load

❉ ❉

Rapid Intensive

— —

Rinse

❉❉❉ ❉❉❉

—— —

—

———

—

❉❉ ❉ ❉ ❉

❉

—

❉❉❉

❉❉ ❉ ❉ ❉

❉

—

❉❉❉

——— — ——— —

——— —

❉

—

❉❉❉

Rinse

Spin Speed

Hold

Reduction

❉❉

❉❉ ❉❉

❉

—

❉ ❉

Selector

°C

Max. 95° Max. 60°

Max. 40° Max. 95°

Rapid

Max. 60° Max. 60°

Rapid

Max. 60° Max. 60°

Max. 40°

Max. 30°

— —

—

———————— — —

Whirlpool is a registered trademark of Whirlpool USA

5019 301 05389

Programme

Selector

1 2

3 4

6 7

8 9

A B

C D

Black process 45.0° 100.0 LPI

3gb05389.fm Page 2 Tuesday, July 16, 2002 12:03 PM

CONSUMPTION DATA

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx.

Programme

Duration

(hours:minutes) Cotton 90 5.5 54 1.90 2:00 Cotton 60 5.5 49 1.04 2:20 Cotton 40 5.0 44 0.60 2:05

Daily mixed 60’ 40 3.0 47 0.48 1:00

Synthetics 60 2.5 55 0.80 1:30 Synthetics 40 2.5 55 0.60 1:20

Delicates 40 1.5 60 0.60 0:45

Wool 40 1.0 60 0.45 0:40

Silk 30 1.0 60 0.30 0:40

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1. Open the tap.

2. Set the

programme selector

to the desired

programme.

3. Set the

temperature selector

to the desired

temperature.

Special options

can be selected.

5. Check that the door is well closed and turn on the washing machine by pressing the

“ON/OFF”

button. The indicator lights up, indicating that the washing machine is on.

SELECT ANY DESIRED OPTION

“Half Load” button

• Reduces water consumption, above all during rin sing.

• Suitable for lightly-soiled laundry and sm all loads

(max 3 kg).

Note:

Reduce the detergent quantity.

“Rapid Wash” button

“Intensive Rinse” button

• More water and a longer time in rinse cycle is added.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics”, “Daily mixed 60’” and “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.

If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme.

• For quick, economical washes.

• Ideal for minimum loads of lightly-soiled articles.

Note:

reduce the detergent quantity.

“Spin Speed Reduction” button

• Reduces the predetermined automatic maximum spin speed. In some programmes the maximum final spin speed is limited to go easy on your laundry items. Selection of a higher spin speed is not possible.

PROGRAMME CHANGE

To reselect a programme when a cycle has already begun:

1. Switch off the appliance by pressing the

ON/OFF

“

” button.

2. Select the new programm e.

3. Start the programme by pressing the

ON/OFF

“

” button.

PROGRAMME END

1. At the end of the programme the programme

selector moves to the stop position.

2. To unlo ad the machine wait for the door to

unlock (about 1 minute).

3. Switch off the appliance, open the door and

take out the laundry.

4. Close the tap and leave the door ajar to allow

the drum to dry out.

NOTES AND INDICAT IONS FOR USE

WATER LEVEL

• It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.

SPIN SPEED CONTROL

• Spin speed may be reduced automatically or may even be excluded in the case of small loads with highly absorbent garments (e.g. bathrobes, bathmat). This control avoids cloth and m achine damag e and excessive vibrations and consequent noise produced by the machine due to load unbalance: by selecting high spin speeds the noise level increases.

MOTOR NOISE

• The running noises of the new, electronicallycontrolled motor are n ot the s ame as the on es you are used to from your old appliance . Don’t be surprised - modern technology has a modern sound.

CLEANING THE FILTER

• To ensure an impeccable function of the pump, check the filter regular and clean it if necessary.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 05389

Black process 45.0° 100.0 LPI