Whirlpool AWM 3060 INSTRUCTION FOR USE

CoSyDe

3gb05136.fm5 Page 1 Thursday, December 12, 2002 12:57 PM

AWM 3060

A. “On/Off” button B. “On/Off” Indication

Programme

Cotton

with prewash

Synthetics

with prewash

Delicates

with prewash

Cotton

short

Synthetics

short

Delicates

Wool

Silk

Rinse + spin —

Spin —

Gentle spin —

Drain —

Care

Labels

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Type of wash/Notes

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses. 1.5

When you select the “Rapid” option, the “Half Load” option cannot be selected.

Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. 5.0

Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

When you select the “Rapid” option, the “Half Load” option cannot be selected.

Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton. 2.5 Curtains and delicate clothing, dresses skirts, shirts and blouses. 1.5

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning. With this programme you can add starch and/or fabric softener.

The programme ends with an intensive spin cycle. In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. Drain only - no spinning. Alternative method of terminating programme the synthetic, delicate and wool programme and for

premature removal of the laundry.

During the selected washing programme the programme selector knob moves by steps clockwise through the phases

wash, rinse and spin

. Each step takes from

prewash, main

some seconds to several minutes.

❉

: optional / Yes : dosing required

For improved garment care spin speed is null in this programme.

Max

Load

5.0

2.5

Normal

5.0

Rapid

3.0

Normal

2.5

Rapid

1.5

1.0

5.0

5.0 — — — — — — —

1.5 — — — — — — —

Detergents and additives Special options Temperature

Softener Main

——————— —

Wash

❉

❉ ❉ ❉

❉

Yes Yes

Yes Yes — —

Yes —

Yes — Yes — — — Yes — — —

Yes — — —

——

Pre-

wash

Half

Rapid Rinse

Load

❉

❉❉ ❉

❉

❉❉ ❉

❉

Whirlpool is a registered trademark of Whirlpool USA.

—

Hold

❉

❉ ❉ ❉

❉

Selector

°C

Max. 95°

Max. 60°

Max. 40° Max. 95°

Rapid

Max. 60°

Rapid

Max. 60° Max. 60°

Max. 40° Max. 40°

Max. 30°

—

5019 301 05136

Programme

Selector

1 2 3

7 8 9

A B

C D

Black Process Plate

3gb05136.fm5 Page 2 Thursday, December 12, 2002 12:57 PM

CONSUMPTION DATA

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx.

Programme

Duration

(hours:minutes) Cotton 95 5.0 49 1.70 1:50 Cotton 60 5.0 44 0.95 2:00 Cotton 40 5.0 44 0.55 1:50

Synthetics 60 2.5 55 0.80 1:25 Synthetics 40 2.5 50 0.60 0:50

Delicates 40 1.5 50 0.50 0:45

Wool 40 1.0 50 0.50 0:40

Silk 30 1.0 37 0.40 0:40

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1. Open the tap.

2. Set the

programme selector

to the desired

programme.

3. Set the

temperature selector

to the desired

temperature.

Special options

can be selected.

5. Check that the door is well closed and turn on the washing machine by pressing the

“ON/OFF”

button. The indicator lights up, indicating that the washing machine is on

SELECT ANY DESIDERED OPTION

“Half Load” button

• Reduces water consumption, above all during rinsing.

• Suitable for lightly-soiled laundry and small loads (max 3 kg).

Note:

Reduce the detergent quantity.

“Rapid Wash” button

• For quick, economical washes.

• Ideal for minimum loads of lightly-soiled articles.

Note:

reduce the detergent quantity.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics” or “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.

If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme.

PROGRAMME CHANGE

To reselect a programme when a cycle has already begun:

1. Switch off the appliance by pressing the

ON/OFF

“

” button.

2. Select the new programme.

3. Start the programme by pressing the

ON/OFF

“

” button.

PROGRAMME END

1. At the end of the programme the programme selector moves to the stop position.

2. To unload the machine wait for the door to unlock (about 1 minute).

3. Switch off the appliance, open the door and take out the laundry.

4. Close the tap and leave the door ajar to allow the drum to dry out.

NOTES AND INDICATIONS FOR USE

WATER LEVEL

• It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.

SPIN SPEED CONTROL

• Spin speed may be reduced automatically or may even be excluded in the case of small loads with highly absorbent garments (e.g. bathrobes, bathmat). This control avoids cloth and machine damage and excessive vibrations and consequent noise produced by the machine due to load unbalance: by selecting high spin speeds the noise level increases.

MOTOR NOISE

• The running noises of the new, electronicallycontrolled motor are not the same as the ones you are used to from your old appliance. Don’t be surprised - modern technology has a modern sound.

CLEANING THE FILTER

• To ensure an impeccable function of the pump, check the filter regular and clean it if necessary.

Black Process Plate

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 05136