Whirlpool AWE 8760 GG INSTRUCTION FOR USE

GB

A.Programme selector

B.“Temperature” button

C.Temperature display

D.“Spin” button

E.“Start delay” button

F.Time display

G.“Start(Pause)” button

PROGRAMME CHART

	L	H	I	F
C	M		K
			J
	B		G E	D
		A

H.Programme sequence indicator

I.“Door open” indication

J.“Reset/Drain” button

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately:

K.“Service” indication

L.“Water tap closed” indication

M.“Clean filter” indication

Fabrics

Colours

Economy

Max.

Detergents and additives

Options

Spin

Load

Type of wash / Notes

Programme

Tempe-

Care

Pre-

Main

Softener

Eco

Clean+

Pre-

Start

Intensive

Rinse

Spin

Max

rature

Labels

wash

wash

wash

delay

rinse

hold

spin

- Respect the manufacturer's recommendations on the care label

Eco

Pré-

Départ

Rinçage

Arrêt

Essorage

speed

kg

cuve

rpm

lavage

différé

plus

pleine

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their

Mixed

20 - 60°C

3.0

Effectiveblends. one-hour programme. Make sure to wash only similar colours together in one wash load. If

–

Yes

i

–

–

–

i

i

i

i

Max.

soil level requires, add oxygen-based stain removers.

Cotton

Coton

20 - 95°C

6.0

Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and

i

Yes

i

i

i

i

i

i

i

i

Max.

linen.

Synthetics

Synthétique

20 - 60°C

3.0

Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira),

i

Yes

i

i

i

i

i

i

i

i

Max.

polyamide (Perlon, Nylon) or blends with cotton.

Delicates

Délicat

20 - 40°C

1.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

i

Yes

i

–

–

i

i

–

i

i

1000 1)

Wool /

Woolens, labelled with the Woolmark and identified as machine washable, as well as

Laine/Main

20 - 40°C

1.0

textiles made of silk, linen, wool and viscose marked as handwashable.This programme is

–

Yes

i

–

–

–

i

–

i

i

1000 1)

Handwash

tested and approved by The Woolmark Company for machineand handwashable wool.

Select spin speed according to the manufacturer‘s recommendation on the care label.

Baby

Linge bébé

20 - 60°C

5.0

Normally soiled baby clothes, baby quilts, beddings and blankets as well as washable toys

Yes

–

–

Max.

made of cotton and/or linen.The washing liquid is rinsed out even more thoroughly and thus helps

i

i

i

i

i

i

i

to protect sensitive baby skin.

White

Blanc

20 - 60°C

6.0

Normally to heavily soiled and robust cotton laundry.

–

Yes

–

–

–

Max.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in

i

i

i

i

i

addition to your detergent.

Light colours

Couleurs

20 - 60°C

4.0

White and pastel shaded garments made of delicate fabrics.

Yes

–

–

–

1000 1)

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if

i

i

i

i

i

i

necessary also stain removers or bleaches on oxygen basis. Do not use liquid detergent.

Dark colours

Noir

20 - 60°C

4.0

Black and dark garments made of cotton, cotton blends and polyester.

Yes

–

–

Max.

Special programme to reduce colour fading and local discolouration. Prefer to use a liquid detergent

i

i

i

i

i

i

i

for dark garments with this programme.

Normally to heavily soiled and robust underwear, table and bed linen, towels and shirts

Super Silent

20 - 60°C

6.0

made of cotton and linen.

–

Yes

–

–

–

1000 1)

This program is optimised to allow a silent washing by prolonged washing duration and silent

i

i

i

i

i

spinning. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the

morning, or define programme start with “Start delay” accordingly.

AquaEco

20 - 40°C

2.5

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

–

Yes

–

–

–

–

–

Max.

Saving programme with a very low water consumption. Use liquid detergent and the lowest

i

i

i

recommended amount for 3kg laundry. Do not use softener.

Speed 15’

Chrono 15’

20 - 30°C

3.0

Briefly worn clothing made of cotton, artificial fibers and blends with cotton.

–

Yes

i

–

–

–

i

–

i

i

Max.

Refresh programme. Use lowest recommended detergent amount.

EcoCotton

60°C

6.0

Heavily soiled and robust laundry washable at 60°C such as bed linen, table linen towels

–

Yes

–

–

–

Max.

etc..The extended programme duration enables economic energy and water consumption

i

i

i

i

i

while maintaining good washing results.

Rinse & Spin

Rinçage

-

-

6.0

Rinse and intensive spin programme.

–

–

i

–

–

–

i

i

i

i

Max.

&Essorage

Same as the last rinse and the final spin in the “Cotton” programme.

i: optional / Yes : dosing required		The Wool/Handwash cycles of this machine have been tested and approved by The Woolmark Company for
1)	For improved garment care, spin speed is restricted in these programmes.	the washing of Woolmark garments labelled as “machine wash” or “hand wash”provided that the garments are

washed according to the instructions on the garment label and those issued in this programme chart. M0703

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 10807

CONSUMPTION DATA

	Programme	Temperature	Load	Water	Energy	ApproxProgrammeDuration*
		(°C)	(kg)	(l)	(kWh)	(hours : minutes)
	Mixed	40	3.0	45	0.43	1:00
	White	40	6.0	55	0.65	2:45
	Light colours	40	4.0	67	0.50	1:20
	Dark	40	4.0	44	0.53	1:45
	Cotton	95	6.0	59**	1.85	2:00
	Cotton	60	6.0	55	1.02	2:30
	Cotton	40	6.0	55	0.60	2:30
	Synthetics	60	3.0	54**	0.85	1:40
	Synthetics	40	3.0	50	0.50	1:25
	Delicates	40	1.5	50	0.55	0:45
	Wool / Handwash	40	1.0	40	0.55	0:35
	Baby	40	5.0	70	0.65	2:43
	Super Silent	60	6.0	55	0.78	4:00
	Aqua Eco	40	2.5	19	0.43	1:00
	Speed 15´	30	3.0	30	0.15	0:15
	Eco Cotton***	60	6.0	55	0.90	3:30

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable

at that time.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

*** Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE LID AND SELECT THE PROGRAMME

Add detergent as indicated an the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1.Turn the programme selector to the desired programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The “Start(Pause)” button blinks.

2.The temperature can be altered by pressing the “Temperature” button.

3.The indication lamp of the predefined spin speed lights up; in case you want to set another spin speed, press the “Spin” button.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco” button

•With a modified temperature profile and a slightly prologned washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Clean+” button

•Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better

wash performance and stain removal.

•Choose temperature of 30 or 40°C and use with maximum load.

•Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

•Prolongs the programme by approx. 10 to 15 minutes.

•Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate bleaches must not be used!

“Prewash” button

•Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

•Do not use liquid detergent for the main wash when activating the Prewash option.

“Intensive rinse” button

•More water is added and rinse cycle is prolonged.

•This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies.

“Rinse hold” button

•The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

•It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

•If you select “Rinse hold”, do not leave items to soak for too long.

Note: The programme stops to “Rinse hold” at the time the “Rinse hold” light in the programme sequence indicator is on. The indication lamp next to the “Start(Pause)” button blinks.

Terminate the “Rinse hold” option:

•Press the “Start(Pause)” button; the programme will terminate automatically with the final spin cycle for the present wash programme.

•If you do not wish to spin the clothes, turn and hold the “Reset/Drain” button for a few seconds to start the Drain programme.

“Spin” button

•Every programme has a predefined spin speed.

•Press the button to set another spin speed.

•If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during the rinse. The water is drained out only.

START DELAY

The “Start delay” button allows to run the machine at the consumer's convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

•Select programme, temperature and options.

•Press the “Start delay” button to select the delay time up to 23 hours;

•Press the “Start(Pause)” button.

The indication light over the “Start delay” button flashes and the countdown of the delay time begins. The dot between hours and minutes of the delay time indicated flashes.

•The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

•Once having pressed the “Start(Pause)” button, the number of hours preselected can be reduced by pressing and holding the “Start delay” button. From one hour on, the delay time can also be reduced in steps of 10 minutes.

To cancel the “Start delay”

..before you press the “Start(Pause)” button:

•Turn the programme selector to another position or press the “Reset/Drain” button.

..after having pressed the “Start(Pause)” button:

•Press “Start (Pause)“ - the delay time disappears from the display; press “Start (Pause)“ again to start the selected programme immediately.

PROGRAMME START

Open the tap and press the “Start(Pause)” button. The indication lamp next to the “Start(Pause)” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

“LID OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

•All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1.Turn the programme selector to the “Off/O” position.

2.Close the water tap.

3.Open lid and drum and unload the machine.

4.Leave the lid open for some time to allow the interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press the “Start(Pause)” button to pause the programme. The light blinks.

2.Select the new programme, temperature, any options and another spin speed if you want.

3.Press the “Start(Pause)” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A RUNNING PROGRAMME BEFORE THE END

The “Reset/Drain” button cancels a programme before the end.

•Press the “Reset/Drain” button for at least 3 seconds. The water is drained out; it may last a while until you can open the lid.

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 10807