Whirlpool AWA 728 INSTRUCTION FOR USE

GB AWA 728

PROGRAMME TABLE

		Rinse Hold		1) Programme duration figures
				(guideline) are valid for
				maximum temperature wash
				with no special functions.

Programme		Type of fabrics / Degree of soiling / Notes	Max.		Detergent and Additives										Options			Maximum	Recommended	Programme
			Load															technical	Spin Speed	duration
				Pre-		Wash			Softener			Bleach			Intensive	Half	Rinse	Spin		approx.
				wash											90° C	Load	Hold	Speed
			kg															rpm/min	rpm/min	min 1)
Cotton with		Heavily soiled, hard wearing and temperature stable textiles in
	prewash	cotton and linen (bed linen, table linen, underwear, shirts etc.).	5.0	Yes		Yes												700	600 to 700	130
Coton avec pré lavage		The max. load for heavily soiled laundry is 3.5 kg.
Cotton 60° C		Averagely soiled, hard wearing and temperature stable textiles		—
		in cotton and linen (bed linen, table linen, underwear, shirts	5.0			Yes												700	600 to 700	115
Coton 60°C
		etc.).
Coloured 60° C		Averagely soiled blouses, skirts, etc. made of polyester (Diolen,	2.0	—		Yes							—		—			700	450 to 700	100
Couleurs 60°C		Trevira), polyamide (Perlon, Nylon) or cotton blends.
Synthetics 40° C		Lightly soiled blouses, skirts, etc. made of polyester (Diolen,	2.0	—		Yes							—		—			700	450 to 700	85
Synthé tiques 40°C		Trevira), polyamide (Perlon, Nylon) or cotton blends.
Rinse + Spin		Programme for treating wash with starch or softener.	5.0	—		—							—		—			700	450 to 700	20
Rinç age + Essorage		Terminates with an intensive spin cycle.
	Spin	Programme for Intensive spin cycle.	5.0	—		—				—			—		—	—	—	700	450 to 700	10
	Essorage
Delicates 40° C		Delicate curtains, dresses, skirts and blouses.	1.5	—		Yes							—		—	—		600	100 to 400	55
Dé licat 40°C
	Wool	Only machine washable woollens with pure new wool label.		—									—		—	—
		If you select the special function “Rinse Hold” do not leave	1.0			Yes												600	100 to 400	45
	Laine
		garments to soak for too long.
Rinse + Spin		Programme for treating wash with starch or softener.	1.5	—		—							—		—	—		600	100 to 400	15
Rinç age + Essorage		Terminates with a gentle spin cycle.
	Spin	Programme for gentle spin cycle.	1.5	—		—			—				—		—	—	—	600	100 to 400	5
	Essorage
	Draining	Drain only, without spin cycle. Alternative way of terminating	—	—		—			—				—		—	—	—	—	—	3
	Vidange	programmes with “Rinse Hold” setting.
N.B.	The excess of detergent in the dispenser could cause technical problems.																		5019 100 12613

GB

CONSUMPTION DATA

	Programme			Load				Water					Energy					Programme
				(kg)					(l)				(kWh)				duration (min)
Cotton + Intensive 90° C			5.0				72					1.80				115
Cotton 60° C			5.0				69					1.15				115
Coloured 60° C			2.0				66					0.80				100
Synthetics 40° C + Half Load			2.5				49					0.50				85
Delicates 40° C			1.5				70					0.65				55
	Wool		1.0				70					0.55				45

Pre-wash cycle increases programme duration by approx. 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

ADDING DETERGENT AND ADDITIVES

Add the detergent and the additives into the dispenser as follows:

• Programme with pre and main wash

• Main wash programme without pre-wash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (water hardness 4)

Important:

•Be careful not to fill more than the “MAX” level mark.

•For programme with pre-wash: do not use liquid detergents.

•For programmes without prewash from cold to 40° C, it is recommended to use a liquid detergent to avoid whitish residues on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

1.Turn the programme selector knob clockwise to the desired programme.

2.Turn the spin speed selector to the required setting.

PRESS THE DESIRED SPECIAL OPTION BUTTON “Intensive 90° C” button

•This option allows to put up the washing temperaure to 90° C instead of 60° C for the programme 60° C.

•Especially suitable for heavily soiled laundry.

“Half Load” button

•Reduces water consumption in the cotton and synthetics programme, above all during pre-wash and rinse.

•Especially suitable for lightly soiled or small loads (reduce the detergent quantity).

“Rinse Hold” button

•The laundry remains in the last rinse water without progressing to the spin cycle to avoid creasing and prevent colours from changing.

•This option is particularly recommended for the programme “Synthetics” or “Delicates”.

•This function is particularly useful if you want to postpone spinning to a later time or when you do not wish to spin the clothes.

Note: The programme selector knob stops on the position .

Terminate the “Rinse Hold” option:

•Press the “Rinse Hold” button again; the programme will terminate automatically with the spin cycle for the present wash programme.

•If you do not wish to spin the clothes, switch off the appliance, turn the programme knob to the corresponding drain programme and switch on the appliance again.

PROGRAMME START

Open the tap and press the “On/Off” button. The pilot lamp lights up.

DOOR LOCK

During the running programme the door cannot be opened.

The door locks automatically in all programmes. If the programme is stopped or the electrical power supply is terminated, the door lock will open after approximately 1 minute.

PROGRAMME END

•The programme selector knob is at “Stop”.

1.Press the “On/Off” button.

2.Cancel the special options by pressing the appropriate buttons.

3.Turn the water supply tap off.

4.Wait for the door to unlock (about 1 minute).

5.Open the door and the drum flaps and unload the machine.

PROGRAMME RESELECTION AFTER PROGRAMME START

1.Press the “On/Off” button to switch off the appliance.

2.Select the new programme, temperature, spin speed and option.

3.Press the “On/Off” button to switch on the appliance.

TO STOP A PROGRAMME BEFORE THE END AND DRAIN

1.Press the “On/Off” button to switch off the appliance.

2.Set the programme selector to “Drain”.

3.Press the “On/Off” button to start the drain programme.

Only open the door when the programme selector is at “Stop” and the door is unlocked (after approximately 1 minute).

5019 100 12613