Whirlpool AWA 1084, SUPER ECO 7422 INSTRUCTION FOR USE

GB
AWA 1084
Programme Type of wash / Notes
Prélavage
Cotton with Prewash
Coton
Cotton
Couleur
Coloured
Rapide
Quick Wash
Synthétique
Synthetics
Rinçage
Rinse + Spin
Essorage
Spin
Délicat
Delicate
Laine
Wool
Rinçage
Rinse + Spin
Essorage
Spin
Vidange
Drain
Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard wearing and high temperature resistant cotton.
The maximum load for heavily soiled washing is 3.5 kg.
Moderately soiled sheets, tablecloths, underclothes, towels etc. in hard wearing and high temperature resistant cotton.
Averagely soiled blouses, shirts etc. made of polyester (Diolen, Trevira); polyamide (Perlon, Nylon), or cotton blends.
Blouses, shirts, cotton blouses, dark coloured terry towelling, jeans, etc. lightly soiled. Lightly soiled shirts, blouses etc., made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or cotton blends. This programme allows starch or softener to be added.
It is followed by an intensive spin cycle. Programme for intensive spin cycle.
Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.). Machine washable woollens with pure new wool label.
If the “Rinse Hold” option is selected don't leave the wash to soak for too long. This programme allows starch or softener to be added.
It is followed by a gentle spin cycle. Programme for gentle spin cycle. Drain only, without spin cycle.
Alternative way to end programmes after a “Rinse Hold”.
“Froid” Cold “Marche/Arrêt” On/Off
Max. load
kg
5.0 Yes
5.0
2.0
5.0
2.0
5.0
5.0
1.5
1.0
1.5
1.5
——
Detergents and additives Options Temperature
Prewash Main
Wash
1)
Yes
1)
Yes
1)
Yes
1)
Yes
1)
Yes
1)
1)
———— —
1)
Yes
1)
Yes
1)
1)
———— —
1)
———— — —
Programme duration figures (guideline) are valid for maximum temperature wash with no special functions.
: option / Yes: dosing required
1)
Do not use liquid detergents.
2)
For improved garment care spin speed is restricted to 500 rpm in this programme.
3)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Softener Bleach Rinçage
Intensif
Intensive
Rinse
Charge
Reduite
Half Load
Arrêt cuve
pleine
Rinse Hold
❉❉❉ ❉ ❉
❉❉❉ ❉ ❉ ❉ ❉ ❉ ❉
❉ ❉ ❉
—— —
—— — —
—— —
❉❉ ❉ ❉❉ ❉ ❉❉ ❉
❉❉
Maximum
Speed
°C
Spin
rpm
Programme
time
approx.
min.
from “Froid” to 90 1000 130
from “Froid” to 90 1000 115
from “Froid” to 60 1000 100
from “Froid” to 40 1000 85
from “Froid” to 40 500
2)
70
“Froid” 1000 20
from “Froid” to 40 400
from “Froid” to 40 400
“Froid” 400
1000 15
3)
3)
3)
3)
400
55
45
15
10
5
N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.
Whirlpool is a registered trademark of Whirlpool USA.
5019 312 10080
ENERGY AND WATER CONSUMPTION DATA
Programme Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Programme time
(min)
Cotton + Intens. Rinse 90 5.0 72 1.80 115
Cotton 60 5.0 62 1.15 115 Coloured 60 2.0 60 0.80 100 Coloured 40 2.0 60 0.40 100
Quick Wash + Half Load 40 2.5 54 0.50 85
Synthetics + Half Load 40 2.0 54 0.40 70
Delicate 40 1.5 70 0.65 55
Wool 40 1.0 70 0.55 45
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. The data on the “Energy Label” refer to the programme “Cotton 60°C”. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the
household conditions applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
the water out.
PREPARATION OF WASH CYCLE PRESS ANY DESIRED OPTION BUTTON(S)
1. Close the drum flaps and check that they are properly locked.
2. Add detergents and additives into the dispenser to no more than the
“MAX”
level mark, as
follows:
Programme with pre and main wash
Main wash programme without prewash
Fabric softeners and conditioners
Chlorine bleach
Stain remover agents
Anti-scale agents (if necessary)
3. Turn the
programme selector knob
clockwise to
the desired programme.
4. Turn the
temperature knob
to the required
temperature.
5. Turn the
spin speed knob
to the required spin
Intensive Rinse button
• The water level increases for improved rinsing efficiency.
• This option is particularly suitable for areas with very soft water when washing baby linen and helps people with skin allergies.
• For improved garment care it is advised to use the option for the Cotton 90° C and the Coloured 60° C programme.
“Half Load” button
• Reduces the water consumption in the “Cotton” and “Synthetics” programmes especially during the rinse.
• Especially suitable for lightly soiled or small loads (reduces the quantity of detergent).
• Not suitable for high temperature programmes.
“Rinçage Intensif”
“Charge Reduite”
speed.
Rinse Hold button
“Arrêt Cuve Pleine”
• The laundry remains in the last rinse water, without progressing to the spin cycle to avoid creasing and prevent colours from changing.
• This option is especially recommended for the “Synthetics” or “Delicate” programmes.
• This option is perfectly suitable if you wish to postpone the spin or you don't wish to spin the clothes.
Note:
the programme selector stops on “ ”.
Terminate the “Rinse Hold” option.
• Press the “Rinse Hold” button again; the programme will terminate automatically with the spin cycle corresponding to the previously selected wash programme.
• If you do not wish to spin the clothes, switch off the appliance by pressing the
“On/Off”
button. The pilot light goes out. Turn the programme selector to the “Drain” position and switch on the appliance.
PROGRAMME START
Open the water inlet tap and press the
“On/Off”
button. The pilot lamp lights up.
DOOR LOCK
During the running programme, the door cannot be opened. The door locks automatically in all programmes. If the programme is stopped or if an electrical power failure occurs, the door unlocks automatically after about 1 minute.
PROGRAMME END
• The programme selector knob is at “STOP”, the
pilot lamp lights.
1. Press the
“On/Off”
button. The pilot light
goes out.
2. Cancel the options by pressing the appropriate
buttons.
3. Turn the water supply tap off.
4. Wait for the door to unlock (about 1 minute).
Open the door and the drum flaps and unload
5.
the machine.
SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START
1. Press the
“On/Off”
button to switch off the appliance. The pilot light goes out.
2. Select the new programme, temperature, spin speed and options.
3. Press the
“On/Off”
button to switch on the appliance. The pilot light lights.
TO STOP, RESET A PROGRAMME BEFORE THE END
1. Press the
“On/Off”
button to switch off the appliance. The pilot light goes out.
2. Set the programme selector on “Drain”.
3. Press the
“On/Off”
button to start the “Drain” programme. Only open the door when the programme selector is at “STOP” and the door is unlocked (after approximately 1 minute).
NOTES AND INDICATIONS FOR USE
• After switching your washing machine on, it does not start immediately: it needs some seconds in order to lock the door, fill water and then drum starts turning.
• Spinning has an interrupted start-up: the drum starts and stops running several times, to improve spin efficiency and to better balance the laundry.
• At the end of the spinning cycle the drum goes on reversing for some minutes: this helps you unloading the laundry.
• Do not exceed in detergents dosage: excessive foam formation may prevent spinning.
• Your imbalance detection and correction system reduces spin speed or interrupts the spin automatically in case of imbalance load ­see “troubleshooting guide”.
• Your machine has a new, electronically­controlled motor: don't be surprised by its sound.
• If you want to change the programme during the wash cycle, remember to switch the machine off before turning the programme selector knob.
Whirlpool is a registered trademark of Whirlpool USA.
5019 312 10080
Loading...