Whirlpool AWO 346, AWO 366, ATLANTA 1400 INSTRUCTION FOR USE

30106374GB.fm Page 1 Wednesday, April 14, 2010 6:29 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

C D

}

E. Programme selector F. “Start (Pause)” button

A B

J K

G. “Spin” button H. Programme sequence indicator I. “Reset” button J. “Start delay” button K. Time display

Max.

Programme

White Cotton

60 - 95 °C

Coloured Cotton

40 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Eco Cotton

60 °C

Rinse & Spin

Spin Centrifugeren

Gentle Spin Kort centrifugeren

Drain Afpompen

optional / Yes : dosing required

❉

For improved garment care, spin speed is restricted to 1000 rpm in this programme.

For improved garment care, spin speed is restricted to 400 rpm in this programme.

Kookwas

60 - 95 °C

Bonte was

40 °C

Synthetisch

30 - 40 - 60 °C

Fijne was

30 - 40 °C

Gemengde was

40 °C

30 °C

Wol

Koud - 40 °C

Handwas

40 °C

Eco Katoen

60 °C

Spoelen &

Centrifugeren

Care

Labels

— — — —

Load

6.0

5.0

2.5

1.5

3.0

1.0

6.0

1.0

6.0

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

Slightly to normally soiled textiles made of cotton and/or synthetics.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Only woollens, labelled with the Woolmark and identified as machine washable.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

Heavily soiled and robust laundry washable at 60°C such as bed linen, table linen, towels etc. The extended programme duration enables economic energy and water consumption while maintaining good washing results.

Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the

“Cotton” programme. In this programme spinning is gentle. Same as the spin cycle in the

“Wool” programme. Drain only - no spinning. Alternative method of terminating programme

after “Rinse Hold”.

Detergents and additives Special options

Pre-

Main wash

Yes

Softener

❉❉❉❉ ❉ ❉ ❉❉

❉❉

❉❉ ❉❉

❉❉

wash

❉

—

— —

—

—— ——— ——— ———

Start

delay

Start

selectie

❉ ❉ ❉

Pre-

wash

Voor-

was

—

——

Easy

ironing

Gemakkelijk

strijken

——

❉

❉❉❉❉

—— — —

—— — — —— — —

—— —

—— — —— — —— —— — —— —— — ————

Whirlpool is a registered trademark of Whirlpool USA

Intensive

Intensief

spoelen

rinse

Rinse

hold

Spoel-

stop

Spin

Centr.

❉❉

❉❉ ❉❉

❉❉❉

❉ ❉

5019 301 06374

Max.

Spin

Speed

rpm

max.

1000

max.

1000

400

max.

1000

Black process 45.0° 150.0 LPI

30106374GB.fm Page 2 Wednesday, April 14, 2010 6:29 PM

CONSUMPTION DATA

Programme

White Cotton 95 6.0 59 Coloured Cotton Coloured Cotton 40 5.0 56 0.70 2:00

Synthetics 60 2.5 50 Synthetics 40 2.5 46 0.50 1:20

Delicates 30 1.5 60 0.50 0:45

Daily load 40 3.0 41 0.50 1:00

Quick wash 30 3.0 41 0.40 0:30

Wool 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* ** ***

Eco Cotton

The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Reference Programme for Energy Label.

***

Tem pe rat ur e

(°C)

60 6.0 49 1.02 2:20

60 6.0 49 0.78 4:00

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

and temperature.

time display

programme (in hours and minutes), and the indication lamp blinks.

shows the duration of the chosen

to the desired programme

“Start (Pause)”

spin speed

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Clean+” button

• C hoose this option if you use an in-wash additive for stain removal (powder , fo r example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Selectable for programmes “Cotton” and “Synthetics”; choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen basis.

Chlorine or perborate bleaches must not be used!

lights up.

Load

Water

(kg)

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt)

• Do not use liquid detergent for the main wash when activating

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily

• I ncreases the water quantity an d the clothes are sp un very gently.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Rinse hold” button

• The laundry remains in the last rinse water without

• This option is particularly recommended for the programmes

• It is particularly useful if you want to postpone spinning to a

• If you select “Rinse hold” do not leave the laundry items to

Terminate the “Rinse hold” option:

• Press the

Energy

(l)

(kWh)

1.90 2:00

0.80 1:35

sensible. Increases the cycle time by approximately 15 min.

the “Prewash” option.

load” programmes to make ironing easier .

water, washing baby linen and helps people with allergies.

progressing to the final spin cycle to avoid creasing and prevent colours from changing.

“Synthetics”, “Daily load” and “Delicates”.

later time, or if you want to drain only.

soak for too long.

The programme stops to “Rinse hold” at the time the

Note:

“Rinse hold” light in the programme sequence indication is on. The indication lamp next to the

“Start (Pause)”

terminate automatically with the final spin cycle for the present wash programme.

Approx. Programme Duration

(hours : minutes)

“Start (Pause)”

button; the programme will

button blinks.

• If you do not wish to spin the clothes, turn the programme selector to the “Drain” programme and press the

button.

(Pause)”

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin sp eed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

“Start

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay time by 1 to 23 hours.

•Press the

• The time delay indication disappears when the programme

• Once having pressed the

To cancel the “Start delay” ...before you press the “Start (Pause)” button:

• Turn the programme selector to another position or press the

...after having pressed the “Start (Pause)” button:

•Press the

“Start (Pause)”

The countdown of the delay time begins; the “Start delay” indication lamp and the dot on the display will keep blinking until the programme starts.

starts and it is replaced by the remaining programme time.

of hours preselected can be reduced by pressing again the “Start delay” button.

button.

“Reset”

delay time disappears from the time display.

button.

“Start (Pause)”

button for at least 3 seconds - the start

button, the number

PROGR AMME START

Open the tap and press the indication lamp of the programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

“Start (Pause)”

button. The

button lights up. The

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

2. Select the new programme (with temperature), any options

3. Press the

“Start (Pause)”

The light blinks.

and another spin speed if you want.

“Start (Pause)”

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to pause the programme.

button again. The new

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

•Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds; “rES”

“Reset”

appears on the display. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06374

Black process 45.0° 150.0 LPI