6GB33037.fm Page 1 Monday, January 19, 2004 9:47 AM
PRODUCT SHEET
GB
A. Refrigerator compartment
Crisper drawer
1.
Crisper shelf
2.
Shelves / Shelf area
3.
Thermostat control knob/light
4.
Fan
5.
Door trays
6.
Drinks dispenser or door trays
7.
(depending on model)
Bottle rack
8.
Rating plate (at the side of crisper drawer)
9.
Least cold zone
Intermediate temperature zone
Coldest zone
The number of shelves and shape of accessories may vary, depending on the model.
Note:
All shelves, door trays and racks are removable.
Important: Refrigerator accessories must not be washed in a dishwasher.
GB I
D F NL E
B. Freezer compartment
Grid
10.
Area for freezing
11.
Area for storing frozen foods
12.
Ice cube tray (inside the compartment)
13.
Freezer compartment inner door
14.
Removable magnetic seal
15.
GRP
6GB33037.fm Page 2 Monday, January 19, 2004 9:47 AM
The Fridge/Freezer is switched on by means of the thermostat located inside the refrigerator compartment.
The thermostat also serves to adjust the temperature in both the refrigerator and freezer compartments.
Fridge/Freezer compartment controls
Thermostat knob
A.
Light switch
B.
Thermostat control reference
D.
Light bulb (max 15 W)
E.
Freeze switch
F.
Thermostat set to
Thermostat set to
Thermostat set to
Thermostat set to z
The average recommended thermostat setting is 2-3/MED.
The refrigerator can operate at ambient temperatures between +10°C and +38°C.
Optimal performance is obtained at temperatures between +16°C and +38°C.
The ambient air temperature, the frequency of opening the door and the position of the appliance can affect the
Note:
internal temperatures of the refrigerator. These factors must be taken into account when setting the thermostat.
1/MIN: minimum
2-3/MED: medium
7/MAX: maximum
: no refrigeration, no light.
refrigeration.
refrigeration.
refrigeration.
Fan:
The fan gives more even temperature distribution inside the refrigerator compartment, allowing better preservation
of stored food. It is advisable to activate the fan when the ambient air temperature is over 27-28°C. To fit the fan press
the button (5a).
Important:
The fan will run ONLY when the compressor is in operation.
Do not obstruct the fan intake area (5b) with food.
Removing the light bulb
Unscrew the bulb anticlockwise as shown in the figure.
5019 636 33037
GB I
D F NL E
Printed in Italy 01/04
GRP