Whirlpool ARC 1798/1/IX INSTRUCTION FOR USE
60233088GB.fm Page 1 Friday, March 18, 2005 12:26 PM
A
B
3
2
11
10
8
PRODUCT SHEET
9
4
GB
5
7
6
1
. Refrigerator Zone: coldest area
Refrigerator Compartment
Crisper
1.
Shelves / Shelf area
2.
Control panel
3.
Upper door tray
4.
Door trays
5.
Bottle rack
6.
Removable bottle restrainer (if present)
7.
Rating plate (at the side of crisper drawer)
8.
Light, positioned either below the control
9.
panel or inside the appliance (depending on
model)
Crisper drawer
10.
Divider between Refrigerator
11.
compartment and Cool Compartment, in
fixed position (if provided)
: The number of shelves and type of accessories may vary, depending on the model.
Notes
All shelves, door trays and racks are removable.
Important: Refrigerator accessories must not be washed in a dishwasher.
A
. Cool Compartment: least cold area
B
CZ
PL SK H RUS BG
RO
GB
60233088GB.fm Page 2 Friday, March 18, 2005 12:26 PM
Refrigerator compartment controls
A. Thermostat knob.
B. Green LED: indicates that the appliance is ON.
If the LED blinks, contact the After-sales
Service.
C. Fast Cooling button; the function switches off
automatically after approximately 6 hours.
D. Fast Cooling function activated.
E. Thermostat knob setting indicator.
The refrigerator can operate at ambient temperatures between +10°C and +38°C. Optimal performance is obtained
at temperatures between +16°C and +38°C.
Note: The ambient air temperature, the frequency of door opening and the position of the appliance can affect the
internal temperatures of the refrigerator. These factors must be taken into account when setting the thermostat.
(depending on the model)
A. Display indicating the set temperature. If the
display indicating the set temperature blinks,
contact the After-sales Service.
B. ON/OFF button.
C. Temperature selection button.
D. Fast Cooling button. The function switches off
automatically after approximately 6 hours.
E. Fast Cooling function activated.
F. “Vacation” function activation button: for
prolonged disuse.
G. “Vacation” function activation indicator.
Removing the light bulb Replacing the bulb
1. Unscrew the light bulb as shown in the figure. 1. Loosen the screw and remove the lamp cover.
2. When replacing the bulb, bear in mind that this
appliance is fitted with a special bulb (15W with
bayonet fitting); to replace do not unscrew, but pull
towards the inside of the appliance (as indicated by
the arrow).
3. Refit the lamp cover and secure it with the screw.
CZ
5019 602 33088
PL SK H RUS BG
RO
GB
Printed in Italy 03/05
Loading...