Whirlpool AQUASTEAM 9770B INSTRUCTION FOR USE

)

30106392GB.fm Page 1 Friday, June 4, 2010 8:50 AM

GB PROGRAMME CHART

A. “On/Off” button B. Programme selection buttons C. Option buttons D. “Start (Pause)” button E. “Special programmes” button F. “Temperature” button G. “Start delay” button H. “Spin speed” button

(with “Rinse hold” ) I. “Reset/Drain” button J. “Favourites” button

Programme

Mixed

Cotton

Tempe-

rature

20 - 60 °C 6.0

20 - 95 °C 9.0

Care

Labels

Max. Load

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load. If soil level requires, add oxygen-based stain removers.

Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.

- Respect the manufacturer’s recommendations on the care label

{

Type of wash/Not e s

F G H

Programme sequence indication

Add garment Programme

“Child lock” indication “Detergent overdosage” indication Red failure indications

{

Detergents and additives Special options Start

Pre-

Main wash

Yes

Softener Pre-

wash

—

❉

The buttons of the control panel are touch buttons which are activated or deactivated by a simple touch with the fingertip (except the “On/Off” button - it must be pressed down). When operating a button, there is a quiet click; touching a button which is not selectable is answered by a double beep

Eco Easy

❉

wash

——

ironing

❉❉

❉❉❉ ❉ ❉ ❉ ❉❉❉

Intensive

rinse

in process

Steam

Stain

Saniti-

Removal

zation

——

(depending on model

delay

Programme

finished

Spin

speed

❉❉

Spin

Max.

Spin

Speed

rpm

max.

Synthetics

Wool/

Handwash

White

Light

Dark

Super Eco

Aqua Eco

Speed 15’

Rinse & Spin

Spin

Jeans

Delicates

Steam

Auto Clean

Steam

SPECIAL PROGRAMMES

Refresh

❉

optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Only selectable within the temperature range of 40 to 60°C.

20 - 60 °C 3.5

20 - 40 °C 2.0

20 - 60 °C 9.0

20 - 60 °C 6.0

20 - 60 °C 9.0

20 - 40 °C 3.0 20 - 30 °C 3.0

—— ——

20 - 60 °C 7.0 20 - 40 °C 2.5

———

—

Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Woollens, labelled with the W oolmark and identified as machine washable, as well as te xtiles made of silk, linen, wool and viscose marked as handwashable.

This programme is tested and approved by The Woolmark Company for machine- and handwashable wool. Select spin speed according to the manufacturer's recommendations on the care label.

Normally to heavily soiled and robust white cotton laundry.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen basis. Do not use liquid detergent.

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid detergent for dark garments with this programme.

Normally to heavily soiled and robust underwear , table and bed linen, to wels and shirts made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended amount for 3kg laundry. Do not use softener.

Briefly worn clothing made of cotton, artificial fibers and blends with cotton.

Refresh programme. Use lowest recommended detergent amount.

Rinse and intensive spin programme.

9.0

Same as the last rinse and the final spin in the “Cotton” programme.

Intensive spin programme.

9.0

Same as the spin cycle in the “Cotton” programme.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets. Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Self-cleaning programme. Cleans the interior of your washing machine and thus helps to avoid smells or deposits.

Run this programme regularly if you never or seldom wash your laundry at temperatures over 60°C or if your washing machine has not been in use for a long time. IMPORTANT: Do not load any laundry!

During this programme “St” appears on the display.

Clean and dry laundry items made of cotton and/or synthetics which were already used.

Refreshes, reduces smells, moderates creasing and makes the items ready to wear or use within 20 minutes. After programme

1.0

end, immediately put the laundry on hangers for 10 minutes before using. During this programme “St” appears on the display.

The Wool/Handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

Yes

❉

—

— — —

—

— —

——❉—— —

❉❉❉ ❉ ❉ ❉ ❉❉❉

Yes

Yes Yes

—— — — — —

❉

—— — — — —

❉

—— — — — —

❉

—— —

❉

—— —

❉

——

——— — — — —

—— — — — —

❉

——

❉

————— — — — —

Yes

❉ ❉

❉❉❉

Yes

❉❉

——

❉❉❉❉

—— ———

❉❉

❉❉ ❉❉ ❉❉

❉❉

❉❉ ❉❉

❉❉

max.

1000

max.

1000

max.

max. max.

max. max. max.

1000

————— — — — —❉——

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06392

Black process 45.0° 150.0 LPI

30106392GB.fm Page 2 Friday, June 4, 2010 8:50 AM

The Sensor Technology automatically adapts Programme Time, Water and Energy consumption to the size of your wash load.

CONSUMPTION DATA

Programme

Mixed 40 6.0 73 0.60 1:00 Cotton 95 9.0 87 Cotton 60 9.0 64 1.53 2:30

Cotton with “Eco”

Cotton 40 9.0 82 0.80 2:15

Synthetics 60 3.5 46 Synthetics 40 3.5 42 0.50 1:20

Wool/Handwash 40 2.0 45 0.60 0:40

White 40 9.0 82 0.90 2:30

Super Eco 60 9.0 80 1.08 4:00

Aqua Eco 40 3.0 19 0.45 1:00

Speed 15’ 30 3.0 30 0.20 0:15

Delicates 30 2.5 60 0.40 0:45

Steam Auto Clean — — 11 0.50 0:35

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The time indicated on the display can deviate from the values in the table, because it takes into account the operating conditions applicable at that time. ** T o reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).

Steam Refresh — 1.0 0.5 0.20 0:10

***

Light 40 6.0 70 0.50 1:20 Dark 40 6.0 49 0.60 1:40

Jeans 40 7.0 95 0.85 2:31

Tem p e rat u r e

(°C)

60 9.0 64 1.17 4:00

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use (remove separator in detergent dispenser for use of powder detergent if necessary).

1. Push the the programme buttons has finished and only one programme button lights up. The

2. Select the corresponding programme button; it is marked by a blue light. Or select a “special programme” by touching the “Special programmes” button on the display until the symbol of the desired programme lights up.

3. The

temperature

can be altered by touching the “Temperature” button or the “Spin speed” button .

button . Wait until t he light loop around

“On/Off”

“Start (Pause)”

desired programme

and

spin speed

button light blinks.

by touching the

indicated on the display

SELECT ANY DESIRED OPTION

If a combination of programme and/or options is not possible, the option light briefly blinks and and switches off again, and a signal sounds.

“Prewash” button

• Only for heavily soil ed loads (for example sand, granular dirt).

Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating

the Prewash option.

“Eco” button

• With a modified temperature profile and an extended wash

duration, the optimum combination of good wash result and lower energy consumption is achieved.

“Easy ironing” button

• Reduces creasing by an increased water quantity and a very

gentle spin.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• Particularly suitable for areas with very soft water or for

washing baby linen and helping people with allergies.

Load

Water

(kg)

“Steam Stain Removal” button

• Treats the laundry with hot steam during the wash cycle in

• Selectable for laundry made of cotton and/or synthetics within

“Steam Sanitization” button

• Eliminates bacteria and helps sanitizing the laundry.

• Appropriate for cotton and/or synthetic laundry items with

• Prolongs the programme by approx. half an hour to an hour,

“Spin speed” button (incl. “Rinse hold” )

• Every programme has a predefined spin speed.

• Touch the button to set another spin speed.

• If you select spin speed “0”, the water is drained out only,

• If you select “Rinse hold” , the laundry remains in the last

Energy

(l)

(kWh)

2.60 2:20

0.85 1:35

order to help removing stains.

temperature range of 40 to 60°C.

care label within temperature range of 40 to 60°C and up to a maximum load of 6 kg.

depending on the load size.

without spinning. However, intermediate spin phases remain during rinse.

rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

- Select “Rinse hold” if you want to postpone spinning to a later time or if you want to drain only.

- Do not leave the laundry to soak in the rinse hold for too long.

- The programme stops to “Rinse hold” , when the “Rinse hold” symbol on the display blinks; the

button blinks as well.

(Pause)”

- To terminate the “Rinse hold” by draining the water, without any spinning, touch the

- To terminate the programme by spinning the laundry, touch the “Spin speed” button to select the desired spin speed and then the

“Start (Pause)”

Approx. Programme Duration

(hours : minutes)

“Start (Pause)”

button to start the spin cycle.

“Start

button.

SAVE Y OUR FAVOURITE PROGR AMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just touching one button.

• Select the desired programme, temperature, spin speed and option(s), touch and hold the least 3 seconds. The lamp next to blinks and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting, select the programme, shortly touch the

and start by touching

If you want to replace the saved programme setting by another one:

• Proceed as already described above - the previously saved programme setting will be replaced by the new one.

“Favourites”

“Start (Pause)”

button for at

“Favourites”

shortly

button

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature, spin speed and options.

• T ouch the “Start delay” button to select a delay time step between 0:30 and 23:00 hours; a clock symbol appears next to the delay time on the display.

•Touch the

• The time delay indication disappears when the programme

• The number of hours preselected can be changed by touching

To cancel the “Start delay” ...before you touch the “Start (Pause)” button:

• Touch another programme button or set start delay time to

...after having touched the “Start (Pause)” button:

Set the delay time to “0:00” - the time delay disappears after a few seconds; or touch Tou c h programme immediately.

“Start (Pause)”

blinking and becomes constant. The countdown of the delay time begins; the clock symbol and the colon between hours and minutes on the display blink.

starts and it is replaced by the remaining programme time. the “Start delay” button.

“0:00” - the time delay disappears after a few seconds.

“Start (Pause)”

button ; the light stops

- the delay time disappears.

again if you want to start the selected

“ADD GARMENT” INDICATION

Before starting a programme, the symbol lights to show that the door can be opened to add more washing. As soon as you press

“Start (Pause)”

programme and must on no account be forced open. In case you have to open it urgently during a running programme, refer to “Reset a running programme before the end”. If you try to start a wash programme and the door is not properly closed, the “Add garment” indication will blink.

, the door will lock until the end of the

PROGR AMME START

Open the tap and touch the blinking

“Start (Pause)”

“Door open” indication goes off, and the lit bubbles indicate that the programme is in process. In some phases, the remaining programme time is newly calculated - if this is the case, the “6 Sense” indication on the display will fade, and the remaining programme time is replaced by an animation.

“Start (Pause)”

button light becomes constant. The

button ; the

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. To activate the child lock:

• The washing machine has to be switched on .

• Touch the “Temperature” and the “Spin speed” buttons simultaneously for a few seconds until the key symbol

on the display blinks - the key symbol will light

afterwards to show that the child lock is active.

The programme setting cannot be changed anymore; the only change possible is to either reset the running programme by touching and holding “Reset/Drain” for a few seconds, or to switch the wash ing machine off by pushing To deactivate the child lock, proceed in the same way as for activating it.

“On/Off”

RED FAILURE INDICATIONS

If one of the red failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”.

PROGRAMME END

• The display shows “End”, and the “Programme finished” indication lights up.

1. Switch the machine off by pushing

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

• If you do not switch the washer off, the display lights go out automatically after a few minutes to save energy; only “End” will remain visible on the display.

“On/Off”

DETERGENT OVERDOSAGE INDICA TION

The symbol will light up at the end of the programme if you used too much detergent. Use less detergent next time.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Touch the

programme. The light blinks.

2. Select the new programme, temperature, any options and

another spin speed if you want.

3. Touch the

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start (Pause)”

button to pause the

button again. The new

RESET A RUNNING PROGRAMME BEFORE THE END

The

“Reset/Drain”

the end. Touch and hold the seconds; an animation appears on the display. The water is drained out; it may last a while until you can open the door.

button cancels a programme before

“Reset/Drain”

Whirlpool is a registered trademark of Whirlpool USA

button for at least 3

5019 301 06392

Black process 45.0° 150.0 LPI