Whirlpool AKZ 501 NB, AKZ 501 WH, AKM 981/NE PROGRAM CHART

AKM 981 PRODUCT SHEET

DE GB FR NL ES PT IT GR SE NO DK FI PL CZ SK RU BG HU RO

Rear left round induction cooking zone Ø 210 mm

Front left round induction cooking zone Ø 145 mm

Rear right round induction cooking zone Ø 180 mm

Front right round induction cooking zone Ø 180 mm

Display

Important: To avoid permanently damaging the vitroceramic hob, do not use:

- pots with bottoms that are not perfectly flat.

- metal pots with enamelled bottom.

Any aesthetic defects (scratches, marks, etc.) must be reported at the time of installation.

HOB DIMENSIONS (mm)

TYPE: PLEAC 230 V~/400 V 3N ~ 50 Hz 7.2 kW TYPE: PLEAC 230 V ~ 50 Hz 7.2 kW (for UK only)

5019 319 01046

USING THE HOB

On/Off

Heat setting increase

Heat setting decrease

To switch the hob on, keep button If none of the cooking zones is activated within 20 seconds, the hob switches off automatically as a safety precaution. Press one of the buttons Select the required heat setting with buttons

IMPORTANT:

recipient is placed on it. To change the heat setting of a plate, press buttons Press buttons Press button

CHILD SAFETY

The function button. This function locks all the buttons except the hob On/Off button even after the hob is switched off and on again and can deactivated by pressing button above the function button goes off.

TIMER

The cooking zones. To programme a given cooking zone with the timer function, select and activate the cooking zone with one of the buttons up next to the timer display, indicating the cooking zone selected. Within 20 seconds, set the cooking time using buttons remains lit. At the end of the set cooking time, an acoustic signal sounds. If a cooking zone has been set with the timer function, it is deactivated and the red indicator dot goes off. The timer function can be used to activate all cooking zones at the same time. To set the "clock" function, set the plate heat level to 0 (zero). Use button When the set time has elapsed, an acoustic signal sounds.

FAST BOIL

The To activate the function, select a cooking zone with button A P appears on the display.

RESIDUAL HEAT INDICATOR.

After the cooking zone is switched off, the residual heat indicator

“0”

until the hob temperature falls to an acceptable safety level.

IMPORTANT:

causes switching off of the cooking zone (e.g. after approx. 1 hour at maximum heat setting, the cooking zone switches off).

The hob's safety features include an automatic switch-off function. Prolonged use of the same heat setting

After setting the heat level, the selected cooking zone is deactivated within 10 seconds if no

“B”

“A”

function (if available) can be used as a clock and also for programming the operation of the required

“F” +/-

“B”

“C”

and

to switch off all activated plates.

function is switched on by holding down button

“B”

(1-99 min). After 20 seconds, the timer function starts automatically and the red indicator dot

function sets a heating level higher than max. to bring water rapidly to the boil.

“A”

pressed for approx. 2 seconds. The 4 cooking zone displays show

corresponding to the cooking zone you intend using.

at the same time to cancel the setting; if the plate is on, it is switched off.

. To activate the function, press the button with the clock symbol

“B”

Fast boil

Child safety

Timer

“C”

. Heat settings go from 1 to 9.

“B”

“C”

“B”

and press button

“H”

“0”

“E”

until a dot lights up above the

“A”

. This function remains on

“E”

again until the dot

“F”

. A dot lights

“F” +/-

to set the required time.

“D”.

remains on or flashes, alternating with