Whirlpool AKR 302/NB INSTRUCTION FOR USE

	AKR 302	PRODUCT DESCRIPTION SHEET

HU

1. Removable panstand grids

2. Large burner

3-4. Medium burner

5. Small burner

6. Medium burner control knob

7. Medium burner control knob

8. Large burner control knob

9. Small burner control knob

10. Timer/Minute minder

11. Burner selector

12. Indicator lights

13. Minute setting

14. Alphanumeric display

Symbols

Shaded

Tap closed

circle

Large flame

Maximum opening of gas

and star

and electric ignition

Small

Minimum opening of gas

flame

Innovative cooktop features

The gas cooktop you have bought has some innovative features, compared with traditional gas cooktops.

Instantaneous burner ignition: simply turn the knob to the desired symbol and press,

releasing it again as soon as the burner lights. Unlike with many traditional cooktops with safety burners, it is unnecessary to hold the knob down for several seconds.

Programming burners for automatic switch-off: any one of the four burners can be set. In this way, once the time set on the display (14) has elapsed, the burner switches off automatically. In addition, the programmer can be used as an ordinary minute minder, without connecting it to any burner function in particular.

“Touch control”: this modern technology not only guarantees excellent performance and ease of use, but an extremely easy-to-clean cooktop surface.

To activate the programmer or minute minder, just press lightly on the symbols , and

(11 and 13).

5019 319 53771

Operation of burners with safety device and electric ignition

To light one of the burners:

•Press the relative knob and turn it anti-clockwise to the large flame and star setting .

•Keep the knob pressed until the burner ignites.

•Release the knob once the burner has ignited.

If the burner does not ignite, repeat the operation.

Note:

—Should particular local conditions of the delivered gas make the ignition of the burner difficult, it is advisable to repeat the

operation with the knob turned to the small flame setting .

—The burner safety system serves to prevent the emission of gas if the flame should be extinguished accidentally (draughts, interruptions in gas supply, dousing with liquids, etc.).

Operation of programmer:

•The programmer function can only be used for N.B.: To zero the display, press and at the

one burner at a time.

•To select the burner press the relative

symbol (11).

A red indicator light (12) indicates the selected burner. When the indicator light of the desired burner comes on, select the cooking time (from 1 to 99 minutes) by pressing the symbols or

(13). The display (14) shows the set time and the numbers flash for approximately three seconds, after which the countdown begins. When the set time has elapsed, the burner switches off automatically and a buzzer sounds. At the same time, the red indicator light flashes for approx. 10 seconds, after which the programmer switches off.

•At the end of cooking, turn the knob back to the symbol (tap closed).

same time. At this point, a new time setting can be made, or else the programmer can be switched off by pressing and at the same time. In both cases, the burner remains lit.

—The programmer can be activated either with the burner on or off. For example, this function can be useful when cooking must continue for a set number of minutes once the water is boiling.

—In any event, when lighting burners always follow the instructions given in the previous paragraph (operation of gas burners).

Operation of minute minder:

The minute minder function can be used both for cooking needs and for needs not directly linked to the cooktop. Its operates independently of the burners.

Ensure no burner is selected. If a burner is selected, press the symbol (11) repeatedly until all indicator lights are off.

Select the desired time (from 1 to 99 minutes) by pressing symbols and (13) at the same time. The display (14) shows the set time and the numbers flash for approximately three seconds, after which the countdown begins. When the set time has elapsed, a buzzer sounds.

N.B.: To zero the display, press and at the same time. At this point, a new time setting can be made, or else the minute minder can be switched off by pressing and at the same time.