Whirlpool AKP 803/IX INSTRUCTION FOR USE

AKP 802/803 IX/WH

GB IE

PRODUCT DESCRIPTION SHEET

1.2.3. Top oven runner positions

11.12.13.14. Bottom oven runner positions

4. Control panel

5. Top oven cooling fan (not visible)*

6. Top oven light

7. Top oven grill heating element

8. Top oven bottom heating element
(not visible)

9. Top oven door hinges

10. Top oven door

15. Bottom oven light

16. Bottom oven fan

17. Bottom oven round heating element

18. Bottom oven door hinges

19. Bottom oven cool door

Accessories

• 2 wire shelves

• 2 drip trays

• Kit “Grill Pan Set”

Drip tray

1. Programmer (for bottom oven only)

2. Bottom oven temperature light

3. Bottom oven function selector

4. Top oven grill control light

5. Top oven grill control knob

6. Top oven temperature light

7. Top oven function selector

ACCESSORIES

Wire shelf

CONTROL PANEL

*Warning: The cooling fan (not visible)

still works for a few minutes after the
oven is switched off to allow an optimal
cooling of the appliance.

Grill Pan Set

ELECTRONIC PROGRAMMMER

(FOR BOTTOM OVEN ONLY)

Settings

If a function button is briefly pressed and released, the
selected function is displayed for 5 seconds. Within this time,
it is possible to select a function. Five seconds after the
function button is released or after setting is completed, the
display returns to the time of the day. When a programme has
been set, it automatically starts immediately. The selection of
a function is accompanied by an acoustic signal.

Digital clock

• The programmer is complete with a digital clock which
has an illuminated display showing the hours and minutes.
When the appliance is first connected to the power
supply, and after any power failures or disconnections, the
time can be set with the +/- buttons.

• The counting-up/counting-down speed increases/
decreases when the buttons are held down.

• Select the time of the day function by pressing the
cooking time and end of cooking time buttons
simultaneously, and set the time of day with the +/­buttons. When you set the clock, all previously set
programmes are cancelled.

Semi-automatic operation with cooking time

• Turn the oven on and set the desired temperature.

• Press the cooking time button and set the required time

with the + button (e.g. for 30 minutes cooking time, enter
30 minutes). The ”A” indicator and cooking pot symbol
come on. When the cooking time has elapsed, the oven
switches off, the acoustic signal sounds and the “A”
indicator starts blinking. To mute the alarm, press the
cooking time and end of cooking time buttons
simultaneously. The oven will then return to manual mode.

Semi-automatic operation with end of cooking time

• Turn the oven on and set the desired temperature.

• Press the end of cooking time button and set the

required end time with the + button (e.g. if the actual
time of the day is 14.00 and you require 30 minutes
cooking, enter 14.30). The “A” indicator and cooking
pot symbol will come on. When the time of the day
reaches the end of cooking time, the oven switches off,
the acoustic signal sounds and the “A” indicator starts
blinking. To mute the alarm, press the cooking time and
end of cooking time buttons simultaneously. The oven
will then return to manual mode.

Timer

Cooking time with automatic operation

End of cooking time

Decreases the current value (all functions)

Increases the current value (all functions)

Automatic operation

Cooking time and manual mode

Minute minder

Fully automatic operation

• Turn the oven on and set the desired temperature.

• Press the cooking time button and set the required time

with the +/- buttons (e.g. for 30 minutes cooking, enter
30 minutes). The “A” indicator comes on.

• Select the end of cooking time. The earliest possible end
time is displayed. Set the required end of cooking time
with the + button (e.g. to finish cooking at 14.00, enter

14.00). The oven switches on at the specified time
(e.g. if the end of cooking time is 14.00 and the cooking
time 30 minutes, the cooking cycle will start at 13.30)
and switches off when the established cooking time has
elapsed. After the automatic cooking cycle has ended,
the “A” indicator starts blinking accompanied by the
acoustic signal. To mute the alarm, press the cooking
time and end of cooking time buttons simultaneously.
The oven will then return to manual mode.

Minute minder

Press the minute minder button and set the required time
with the +/- buttons.
As the set time elapses the bell symbol remains alight.
When the set time has elapsed, the acoustic signal sounds.
To mute the alarm press the timer button. The minute
minder does not control any oven function.

Acoustic signal

The acoustic signal sounds at the end of a minute minder
cycle or a cooking cycle for a period of 7 minutes. Once

have set the clock on the time of day (with all the

you
other functions cancelled), you can set the level of the
acoustic alarm by pressing the - button.
Three levels are available (low - medium - high).

Setting error

This will be indicated by the acoustic signal and by the
blinking auto symbol. The faulty setting can be corrected
by resetting either the cooking time or the end of cooking
time or by cancelling the programme.

Cancelling a programme

To cancel a programme press the cooking time and end of
cooking time buttons simultaneously. This will select the
manual function. Every progra
cancelled, once it has come to an end.

mme will be automatically