|
AKM 432 |
PRODUCT DESCRIPTION SHEET |
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
FR |
1. Removable panstand grids
2. Large burner
3. Rapid electric hotplate
4-5. Medium burners
6. Large burner control knob
7. Medium burner control knob
8. Medium burner control knob
9. Electric hotplate control knob
10. Pilot lamp for electric hotplate
Symbols
Shaded
Tap closed
circle
Large flame and
Maximum opening/delivery
star
and electronic ignition
Small flame
Minimum opening or reduced delivery
Operation of burners with electric ignition
To light one of the burners:
•Press the relative knob and turn it
anti-clockwise to the large flame and star setting .
•At the same time, keep the knob pressed against the control panel until the burner ignites.
•Release the knob.
If the burner does not ignite, repeat the operations described above.
Note:
—Should particular local conditions of the delivered gas make the ignition of the burner difficult, it is advisable to repeat the
operation with the knob turned to the small flame setting .
Operation of the electric hotplate
•Set the knob to one of positions 1-6, which correspond to different temperatures.
•To switch off the hotplate, set the knob to position “0”.
Important
Improper use of the grids can result in damage to the hob: do not position the grids upside down or slide them across the hob.
Do not use:
—cast iron griddles or terracotta pots and pans
—heat diffusers such as metal mesh, or any other types
—two burners simultaneously for one receptacle (e.g. fish kettle).
5019 319 61651