Whirlpool AKP 286/NB/01, AKP 286/IX/02, ETI 6645 IN INSTALLATION

ETI 6645 PRODUCT DESCRIPTION SHEET
ES FR DE NL PT GR GB SK PL CZ HU FI NO SE DK IT RU RO BG
1.
Rear left round induction cooking zone Ø 145 mm
2.
3.
Rear right round induction cooking zone Ø 210 mm
4.
Front right round induction cooking zone Ø 145 mm
5.
Display
Important: To avoid permanently damaging the vitroceramic hob, do not use:
- pots with bottoms that are not perfectly flat.
- Metal pots with enamelled bottom.
Any aesthetic defects (scratches, marks, etc.) must be reported at the time of installation.
HOB DIMENSIONS (mm)
TYPE: PLEAN 230 V~/400 V 3N ~ 50 Hz 6.0 kW TYPE: PLEAN 230 V ~ 50 Hz 6.0 kW (for UK only)
5019 419 01104
USING THE HOB
A
On/Off
B
Heat setting increase
C
Heat setting decrease
CAUTION:
H
IMPORTANT:
causes switching off of the cooking zone (e.g. after approx. 1 hour at maximum heat setting, the cooking zone switches off).
Before switching on the hob, deactivate the CHILD SAFETY DEVICE by pressing button
To switch the hob on, keep button If none of the cooking zones is activated within 10 seconds, the hob switches off automatically as a safety precaution. Press one of the buttons Select the required heat setting with buttons
IMPORTANT:
recipient is placed on it. To change the heat setting of a plate, press buttons Press buttons Press button
CHILD SAFETY
The function button. This function locks all the buttons except the hob On/Off button even after the hob is switched off and on again and can be deactivated by pressing button above the function button goes off.
TIMER
The To programme the timer for a given cooking zone, first select the desired cooking zone using one of the buttons
“B”
. To activate the function, press the button with the clock symbol activated zone. A dot lights up next to the display of the selected cooking zone. Within 6 seconds, set the cooking time using buttons zone has been programmed to operate with the timer, it is switched off and the indicator dot switches off too.
TIMER
The
FAST BOIL
The To activate the function, select a cooking zone with button A P appears on the display.
RESIDUAL HEAT INDICATOR.
After the cooking zone is switched off, the residual heat indicator
“0”
until the hob temperature falls to an acceptable safety level.
The hob's safety features include an automatic switch-off function. Prolonged use of the same heat setting
After setting the heat level, the selected cooking zone is deactivated within 60 seconds if no
“B”
“A”
function (if available) can be used to program the operation of a cooking zone.
function can only be used to activate one cooking zone.
“B”
“C”
and
to switch off all activated plates.
function is switched on by holding down button
“F” +/-
function sets a heating level higher than max. to bring water rapidly to the boil.
“A”
pressed for approx. 2 seconds. The 4 cooking zone displays show
“C”
or
corresponding to the cooking zone you intend using.
“B”
at the same time to cancel the setting; if the plate is on, it is switched off.
(1-99 min). At the end of the set cooking time, an acoustic signal sounds. If a cooking
D
Fast boil
E
Child safety
F
Timer
“C”
or
. Heat settings go from 1 to 9.
“B”
“C”
or
.
“B”
or direct press button
“H”
.
“E”
“0”
“E”
until a dot lights up above the
“A”
. The function remains on
“E”
again until the dot
“F”
, then reselect button
“D”
remains on or flashes, alternating with
“B”
of the
.
.
Loading...