Whirlpool AKM 955/BA/02 INSTRUCTION FOR USE
AKM 955 BA PRODUCT DESCRIPTION SHEET
FR
1.
Radiant cooking zone Ø 180
2.
Halogen dual cooking zone Ø 210/120
3.
Halogen cooking zone Ø 145
4.
Radiant cooking zone Ø 145
5.
Display
Important:
To avoid permanently damaging the glassceramic top, do not use:
- Pots with bottoms that are not perfectly flat.
- Metal pots with enamelled bottom
.
HOB MOUNTING DIMENSIONS (mm)
Type PLENS 230 V~/400 V 3 N~ 50 Hz 6,5 kW
5019 319 54121/A
A B
The button must be pressed for about 2 sec. to switch the hob on.
The indication
is activated, the hob switches itself off automatically on safety grounds.
Choose the button for the desired cooking area and press it.
The display of the chosen cooking area becomes brighter.
Press the +/- buttons in area B within 5 sec. to adjust the required cooking setting. The first two
cooking steps correspond to the Gentle heat function and the Keep hot functions (if provided). The
other selectable cooking settings go from 1 - 10. The highest selectable cooking setting equates to
the TURBO setting (if provided). The additional functions GENTLE HEAT, KEEP HOT and TURBO HEAT
are indicated in the display by a red arrow. All selections are stopped and cancelled by simultaneously
pressing the + and - buttons.
IMPORTANT:
depending on the set power output, switches off the cooking zone at maximum power at the earliest
after one hour or after 6 hours at minimum power, if no setting change takes place.
The Dual Special Function of each cooking area can be switched on or off with this button.
The appropriate cooking area must be switched on for the special function to be selected.
appears in area A on the 4 displays. If within about 25 sec. none of the cooking zones
0
For safety reasons, the hob is equipped with an automatic cut-off function, which,
C
D
DUAL ZONE FUNCTION Enables the external heating ring of the cooking zone to be
The TIME SWITCH function [if available] can be used both as a short-time alarm and also allocated to
each selected cooking area.
To be able to allocate the time switch function to a specified cooking zone, the cooking zone must
first be selected in area A and switched on. The function is switched on by pressing the clock symbol
button. The control LED starts to flash. This means that the cooking time can be set within 20 sec. by
means of the +/- buttons (1-99 min.). After a 20 sec. start-up the timer function begins automatically
and the control LED goes on permanently. The 20 seconds can also be prematurely confirmed, after
confirming the clock symbol button.
An acoustic signal sounds for a maximum of 1 minute at the end of the preset cooking time. However,
the signal can be switched off in advance by pressing the clock symbol button. If the time switch
function has been allocated to the cooking area, this will be switched off and the control LED
extinguished.
Only one cooking zone at a time can be operated with the time switch function.
When using the function as a short-time alarm, ensure that the short-time alarm is only activated after
confirming the clock symbol button.
switched on.
Loading...