3gb53661.fm Page 39 Monday, November 25, 2002 12:20 PM
INSTRUCTIONS FOR USE
BEFORE USING THE GLASS CERAMIC HOB INSTALLATION
ELECTRICAL CONNECTION
ENERGY SAVING TIPS
PROTECTING THE ENVIRONMENT
DECLARATION OF CONFORMITY 
PRECAUTIONS AND GENERAL RECOMMENDATIONS COOKTOP ACCESSORIES
CARE AND MAINTENANCE OF THE GLASS-CERAMIC COOKTOP
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
39
3gb53661.fm Page 40 Monday, November 25, 2002 12:20 PM
BEFORE USING THE GLASS CERAMIC HOB
•To make the most of your new appliances read the users instructions carefully and keep them on hand for consultation in the future.
INSTALLATION
Cooktop
•The cooktop must be set into a worktop between 20 mm and 50 mm thick. There must be nothing between the cooktop and the oven (cross rails, brackets, etc.).
•If the cooktop is to be installed next to a column unit, leave a distance of at least 100 mm from the edge of the cooktop to the side of the column unit.
•Cut an opening in the worktop of the dimensions shown in the Product Description Sheet supplied separately.
N.B.: Remove the protective film before installing the cooktop.
•If the worktop is made of wood, use the supplied spring clips and screws.
1.Position the 4 clips (D) as shown and at the specified dimensions
2.Secure the clips using screws (E).
3.Fit the cooktop into the worktop.
•If the worktop is made of marble, ceramics, natural stone, etc., the cooktop must be secured with brackets (F) code 4819 404 78697 (to be requested from After-Sales Service).
1.Fit the cooktop into the worktop.
2.Position the 4 brackets (F) as shown in the figure, in accordance with the thickness of the worktop.
3.Fix the 4 screws (G) in holes (H).
40
Loading...