Whirlpool AKM 534/NB INSTRUCTION FOR USE

AKM 534 PRODUCT DESCRIPTION SHEET

1. Removable panstand grids

2. Medium burner

3. Rapid electric hotplate

4. Large burner

5. Small burner

6. Medium burner control knob

7. Large burner control knob

8. Small burner control knob

9. Hotplate control knob

10. Electric hotplate operation lamp

Symbols

Shaded circle Tap closed

9 6

Large flame and star Small flame Minimum opening or

Maximum opening/delivery and electric ignition

reduced delivery

Operation of burners with safety device and electric ignition

To light one of the burners:

• Press the relative knob and turn it anticlockwise to the large flame and star setting .

• At the same time, keep the knob pressed against the control panel until the burner ignites.

• After the burner has ignited, keep the knob pressed for about 10 seconds.

• Release the knob.

If the burner does not ignite, repeat the operations described above.

5019 319 53061

Note:

— Should particular local conditions of the

delivered gas make the ignition of the burner difficult, it is advisable to repeat the operation with the knob turned to the small flame setting .

— The safety device of the burner shuts off the

gas supply to the burner if its flame goes out accidentally (because of a sudden gust of wind, an interruption in the gas delivery, the overflowing of liquids, etc.).

Operation of the electric hotplate

• Set the knob to one of positions 1-6, which correspond to different temperatures.

• To switch off the hotplate, set the knob to position "0".

DIMENSIONS OF COOKING HOB AND WORKTOP

NOTE: In case of installation of a hood above the cooktop, please refer to the hood instructions for the correct distance. Important:

If the cooktop is installed over a built-in oven without forced ventilation cooling, make sure there are air inlets and outlets to allow adequate aeration inside the cabinet. Figure A illustrates an assembly example.

—

FIG. A

INJECTORS TABLE CATEGORY II2E+3+

Type of gas used Type of

NATURAL GAS (Methane) G 20

NATURAL GAS (Groningue) G 25

LIQUID PETROLEUM GAS

(Cylinder) G 30 LIQUID PETROLEUM

GAS (Cylinder) G 31

Type of gas used Appliance model Total rated heat

G 20 20 mbar 3 gas + 1 E 5.65 538 l/h 11.3 G 25 25 mbar 3 gas + 1 E 5.24 581 l/h 10.5 G 30 28-30 mbar 3 gas + 1 E 5.65 411 g/h 11.3 G 31 37 mbar 3 gas + 1 E 5.65 403 g/h 11.3

burner

large medium small

ELECTRIC HOT PLATE POWER: 1500 W.

Injector marking

128

94 76

128

94 76

85 65 50

Rated heat capacity Pcs-kW

3.00

1.65

1.00

2.78

1.53

0.93

3.00

1.65

1.00

3.00

1.65

1.00

capacity Pcs-kW

Rated consumption

286 l/h 157 l/h

95 l/h

308 l/h 170 l/h 103 l/h

218 g/h 120 g/h

73 g/h

214 g/h 118 g/h

71 g/h

Reduced heat capacity Pcs-kW

0.60

0.35

0.30

0.60

0.35

0.30

0.60

0.35

0.30

0.60

0.35

0.30

Total rated consumption

Gas pressure

min. rat. max.

17 20 25

20 25 30

20 28-30 35

25 37 45

Air required for burning m3/h