|
AKM 269 |
PRODUCT DESCRIPTION SHEET |
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
GB |
IE |
Operation of burners with safety device and electric ignition
To light one of the burners:
•Press the relative knob and turn it anti-
clockwise to the large flame and star setting 
.
•At the same time, keep the knob pressed against the control panel until the burners ignites.
•After the burner has ignited, keep the knob pressed for about 10 seconds.
•Release the knob.
If the burner does not ignite, repeat the operations described above.
1.Removable panstand grids
2-3. Medium burners
4.Large burner
5.Small burner
6. Medium burner control knob
7. Medium burner control knob
8. Large burner control knob
9. Small burner control knob
Symbols
Shaded
Tap closed
circle
Large flame
Maximum opening of gas
and star
and electric ignition
Small
Minimum opening of gas
flame
Note:
—Should particular local conditions of the delivered gas make the ignition of the burner difficult, it is advisable to repeat the
operation with the knob turned to the small flame setting 
.
—The safety device of the burner shuts off the gas supply to the burner if its flame goes out accidentally (because of a sudden gust of wind, an interruption in the gas delivery, the overflowing of liquids, etc.).
5019 319 54531 |
Whirlpool is a registered trademark of Whirlpool USA |
Loading...