Whirlpool GKC 1311/0 WS, AFB 440/G, AFB 716/G, AFE 517/G CV151 PRODUCT SHEET
|
|
|
|
|
PRODUCT SHEET |
GB |
|
1. |
Freezer compartment |
|
|||||
2. |
Control unit |
|
|||||
3. |
Area for drawers and pull out baskets/ |
||||||
|
|
|
|
|
|
doors |
|
|
|
|
|
|
4. |
Pull-out defrost water drain |
|
|
|
|
|
|
|||
|
|
|
|
|
|||
5. |
Rating plate (on the inside of the |
|
|||||
|
|
|
|
|
|
appliance) |
|
6. |
Ice packs (inside) if provided. |
|
|||||
storage compartment
freezer compartment
Note: the design of drawers and accessories may vary, depending on the model.
Controls (depending on model)
AThermostat knob.
BYellow LED: indicates that the fast freeze function is in operation.
CRed LED: it lights up to indicate that the temperature in the freezer compartment is too high.
DGreen LED: indicates that the appliance is connected to the power supply.
EFast freeze button.
FExternal luminous thermometer (if provided).
GMechanical thermometer (if provided).
GB F E
PRODUCT SHEET
Freezer compartment temperature adjustment
The appliance is normally factory set for optimum operation at a temperature of -18°C. To adjust the compartment temperature, proceed as follows:
•Turn the thermostat knob A to 1/Min for a storage temperature that is less cold.
•Turn the thermostat knob A to 4/Max for colder storage temperature.
•Turn the thermostat knob A to ● to switch off the freezer (the appliance is still connected to the mains power supply).
Alarm signals
Temperature
alarm
Signal |
Cause |
Solution |
The red LED C lights up |
The temperature is above - |
Press button E until |
(and the acoustic alarm |
12°C |
the temperature |
sounds in models with |
|
returns below |
luminous thermometer F) |
|
-12°C |
Fit the spacers
(Fig. 1 - 2 depending on the model)
Fig.1 |
Fig.2 |
5019 100 40020/B |
GB F E |
Loading...