ADG 522
EN English
Operating instructions
DISHWASHER - Contents
Operating instructions,1 Important Safety Instructions, 2-3 Product Data, 4
Assistance, 4
Installation, 5-6 Electrical Connection, 7
Description of the appliance, 8 Refined salt and rinse aid, 9 Loading the racks, 10-11 Detergent and dishwasher use, 12 Wash cycles, 13
Special wash cycles and options, 14 Care and maintenance, 15 Troubleshooting, 16
EN |
LEGEND OF SYMBOLS |
|
|
|
Warning/ Grounding/ Electrical Hazard/ Waste/ |
IMPORTANT SAFETY INSTRUCTIONS
Read the instructions carefully before using, as they include important information on safe installation, use and maintenance. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, make sure the manual is kept with the machine.
Remove the appliance from all packaging and make sure it was not damaged during transportation, if it was damaged contact the retailer and do not proceed any further with the installation process.
When using your dishwasher, follow the precautions listed below:
• The appliance must be used to wash domestic crockery in accordance with the instructions in this manual.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not
be made by children without supervision.
• The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the machine exposed to rain and storms.
• Do not store flammable materials in close
proximity to the appliance.
• The water in the appliance is not potable.
• Do not use solvents inside the appliance:
risk of explosion!
• The door should not be left in the open position since this could present a tripping hazard.
• Do not rest objects on the open door or sit or stand on it since the appliance could trip forward.
• The open appliance door can only support the weight of the loaded rack when pulled out.
• The water supply tap must be shut off
Safeguarding the environment/ Recycling/
Use gloves
and the plug should be removed from the electrical socket at the end of every cycle and before cleaning the appliance for carrying out any maintenance work also disconnect in the event of any malfunction.
• Repairs and technical modifications must be carried out exclusively by a qualified technician.
• When unplugging the appliance always pull the plug from the mains socket. Do not pull on the cable.
• In order to avoid laceration hazard, usage of special gloves is needed during the assembling of the appliance.
• During use, the access to the rear wall should be limited in a sustainable manner such as approaching the device to the wall or furniture board.
• Keep packaging materials out of the reach of Children, packaging materials should not be used as a toy.
• Children must not be allowed to play with the appliance.
• Store the detergent, rinse aid and salt out
of the reach of children.
• Appliance is dedicated only for household
use.
• Appliance can not be operated until installation process is complete.
GROUNDING INSTRUCTIONS
•This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of an electric shock by providing a path of least resistance of electric current. This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug.
•The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.
•Extension cord, adapters and conversion plugs must not be used to connect the appliance to the outlet.
2
• Improper connection of the equipmentgrounding conductor can result in the risk of an electric shock.
• Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; If it does not fit the outlet. Have a proper outlet installed by a qualified electrician.
PROPER USE
• Access to disconnection of the appliance
(main plug) shall be ensured after installation.
• When loading items to be washed:
1 - Locate sharp items so that they are not likely to damage the door seal;
2 - WARNING: Knives and other utensils with sharp points must be loaded in the cutlery basket with their points/blades down or placed in a horizontal position with the sharp end facing away from the front of the appliance.
• Use only detergent and rinse additives designed for an automatic dishwasher.
• WARNING: Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• During installation, the power supply must not be excessively or dangerously bent or flattened. Do not tamper with controls.
• To dispose of any packaging materials,
follow local legislation so that the packagings may be reused.
• Use the dishwasher only for its intended function.
• The appliance is to be connected to the water mains using new hose sets. The old hose-sets should not be reused.
• The maximum number of place settings is shown in the product sheet.
|
|
|
|
|
|
|
|
|
|
|
|
SAFEGUARDINGTHEENVIRONMENT |
EN |
|
• This appliance has been made of |
|
|||
|
||||
|
recyclable or re-usable material. |
|
||
|
Scrapping must be carried out in |
|
||
|
compliance with local waste disposal |
|
||
|
regulations. Before scrapping it, make |
|
||
|
sure to cut off the mains cord so that the |
|
||
|
appliance cannot be re-used. |
|
||
|
•For more detailed information on handling |
|
||
|
and recycling of this product, contact |
|
||
|
your local authorities who deal with the |
|
||
|
separate collection of rubbish or the shop |
|
||
|
where you bought the appliance. |
|
||
SCRAPPING OF PACKAGING |
|
|||
•The packaging can be 100% recycled as |
|
|||
|
confirmed by the recycling symbol . |
|
||
|
The various parts of the packaging |
|
||
|
must not be dispersed in the environment, |
|
||
|
but must be scrapped in line with local |
|
||
|
authority regulations. |
|
||
|
|
• The European Directive 2012/19/EU |
|
|
|
|
relating to Waste Electrical and Electronic |
|
|
|
|
Equipment (WEEE) states that household |
|
|
|
appliances should not be disposed of |
|
||
|
using the normal solid urban waste cycle. |
|
||
|
Exhausted appliances should be collected |
|
||
|
separately in order to optimise the cost of |
|
||
|
reusing and recycling the materials inside |
|
||
|
the machine, while preventing potential |
|
||
|
damage to the atmosphere and public |
|
||
|
health. The crossed-out dustbin symbol |
|
||
|
shown on all products reminds the owners |
|
||
|
of their obligations regarding separated |
|
||
|
waste collection. For further information |
|
||
|
relating to the correct disposal of |
|
||
|
household appliances, owners may |
|
||
|
contact the relevant public authority or |
|
||
|
the local appliance dealer. |
|
3
|
|
|
|
|
|
|
|
|
Product Data (product fiche) |
|
|
|
|
|
|
EN |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Fiche |
|
|
|
|
|
|
|
Brand |
|
|
WHIRLPOOL |
|
|
|
|
Model |
|
|
ADG 522 |
|
|
|
|
Rated capacity in standard place settings (1) |
|
|
10 |
|
|
|
|
Energy efficiency class on a scale from A+++ (low consumption) to D |
(high consumption) |
A++ |
|
||
|
|
Energy consumption per year in kWh (2) |
|
|
211 |
|
|
|
|
Energy consumption of the standard cleaning cycle in kWh |
|
|
0.74 |
|
|
|
|
Power consumption of the off-mode in W |
|
|
0.5 |
|
|
|
|
Power consumption of the left-on mode in W |
|
|
5.0 |
|
|
|
|
Water consumption per year in litres (3) |
|
|
2520 |
|
|
|
|
Drying efficacy class on a scale from G (low efficacy) to A (high efficacy) |
A |
|
|||
|
|
Programme time for standard cleaning cycle in minutes |
|
|
180 |
|
|
|
|
The duration of the left-on mode in minutes |
|
|
12 |
|
|
|
|
Noise in dB(A) Re 1pW |
|
|
43 |
|
|
|
|
Built-in model |
|
|
Yes |
|
|
|
|
NOTES |
|
|
|
|
|
|
|
1) The information on the label and fiche relates to the standard cleaning cycle, this programme is suitable to clean normally soiled |
|
||||
|
|
tableware and it is the most efficient programme in terms of combined energy and water consumption. The standard cleaning cycle |
|
||||
|
|
corresponds to the Eco cycle. |
|
|
|
|
|
|
|
2) Based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. Actual energy consumption |
|
||||
|
|
depends on how the appliance is used. |
|
|
|
|
|
|
|
3) Based on 280 standard cleaning cycles. Actual water consumption |
depends on how the appliance is used. |
|
|||
|
|
|
|
|
|
|
|
Assistance
Before contacting Assistance:
•Check whether the problem can be resolved using the
Troubleshooting guide (see Troubleshooting).
•Restart the programme to check whether the problem has ceased to exist.
•If the problem persists, contact the Authorised Technical
Assistance Service.
Never use the services of unauthorised technicians.
Please have the following information to hand:
•The type of malfunction.
•The appliance model (Mod.).
•The serial number (S/N).
This information can be found on the appliance data plate (see
Description of the appliance).
4
Installation
If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.
Connecting the water supply
Adaptation of the water supply for installation should only be performed by a qualified technician.
The water inlet and outlet hoses may be positioned towards the right or the left in order to achieve the best possible installation.
Make sure the dishwasher does not bend or squash the hoses.
Connecting the water inlet hose
•To a 3/4” gas cold or hot water connection point (max.
60°C).
•Run the water until it is perfectly clear.
•Screw the inlet hose tightly into position and turn off the tap.
If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).
The water pressure must be within the values indicated in the Technical Data table - otherwise the dishwasher may be function properly.
Make sure the hose is not bent or compressed.
Connecting the water outlet hose
Connect the outlet hose to a drain duct with a minimum diameter of 2 cm. (A)
The outlet hose connection must be at a height ranging from 40 to 80 cm from the floor or surface where the dishwasher rests.
MAX 80 cm |
MIN 40 cm |
Before connecting the water outlet hose to the sink drain, remove the plastic plug (B).
Anti-flooding protection
To ensure floods do not occur, the dishwasher:
- is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.
WARNING: HAZARDOUS VOLTAGE!
Under no circumstances should the water inlet hose be cut as it contains live electrical parts.
Electrical connection |
|
|
|
|||
|
|
|
||||
|
|
EN |
||||
Before inserting the plug into the electrical socket, make |
||||||
|
||||||
sure that: |
|
|
|
|||
• The socket is earthed |
|
|
and complies with current |
|
||
|
|
|||||
regulations; |
|
|
|
•the socket can withstand the maximum load of the appliance as shown on the data plate located on the inside of the door
(see chapter Description of the appliance);
•The power supply voltage falls within the values indicated on the data plate on the inside of the door.
•The socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance). Do not use extension cables or multiple sockets.
The cable should not be bent or compressed.
If the power supply cable is damaged, have it replaced by the manufacturer or its authorised Technical Assistance Service in order to prevent all potential hazards. (See Assistance)
The Company shall not be held responsible for any incidents, if these regulations are not observed.
Positioning and levelling
1.Position the dishwasher on a level sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position. If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.
2.Before recessing the dishwasher, stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form.
3.Place the dishwasher so that its sides or back panel are in contact with the adjacent cabinets or the wall. This appliance can also be recessed under a single worktop (see the Assembly instruction sheet).
4.To adjust the height of the rear foot, turn the red hexagonal bushing on the lower central part at the front of the dishwasher using a hexagonal spanner with an opening of 8 mm. Turn the spanner in a clockwise direction to increase the height and in an anticlockwise direction to decrease it. (see Building-in instruction sheet attached to the documentation)
5