Whirlpool ACQ052PK0 User Manual

1. Front panel

2. Air louvers

3. Air direction tabs

4. Control panel

5. Filter

Use and Care Guide and Installation Instructions

4380703

ROOM AIR CONDITIONER

Printed in U.S.A.

Questions regarding features, operation/performance, parts, accessories or service?

Call 1-800-253-1301 www.whirlpool.com

Contents

Page A Note To You 2 Air Conditioner Safety 3

Important Safety Instructions 3

Operating Your Air Conditioner 4

Starting your air conditioner 4 Using your remote control 5 Changing air direction 6 Saving energy 6 Normal operating sounds 6

Caring for Your Air Conditioner 7

Cleaning the air filter 7 Cleaning the front panel 7

Repairing paint damage 7 Troubleshooting 8 Ordering Accessories 10 Requesting Assistance or Service 10

Page Location 11 Tools needed 11 Parts supplied 11 Electrical requirements 12 Window preparation 13 Installation 13 Warranty 15

Thank you for buying this appliance.

To ensure you enjoy years of trouble-free operation, we developed this Use and Care Guide.It contains valuable information about how to operate and maintain your appliance properly and safely. Please read it carefully.Also, please complete and mail the Product Registration Card provided with your appliance.This card helps us notify you about any new information on your appliance.

Please record your model’s information.

Whenever you call to request service on your appliance, you need to know your complete model number and serial number. You can find this information on the model and serial number label. (See Installation Instructions for model and serial number location.)

Keep this book and the sales slip together in a safe place for future reference.

A Note To You

Please record the model and serial number information below.Also, record the purchase date of your appliance and the store’s name, address, and telephone number.

Model Number Serial Number Purchase Date Store Name Store Address Store Phone

Use and Care Guide

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

— SAVE THESE INSTRUCTIONS —

Help us help you

Please:

• Install your air conditioner in a window that will hold the weight, and secure the air conditioner according to the Installation Instructions.

• Connect the air conditioner to the proper kind of outlet with the correct electrical supply and ground. (See the Installation Instructions.)

• Make sure the air conditioner is the correct size for the area you want to cool.

• Make sure curtains, drapes or furniture do not block airflow from the air conditioner.

• Use the air conditioner only to do what a window air conditioner is designed to do.

• Make sure the air conditioner is not used by anyone unable to operate it properly.

• Maintain the air conditioner properly.

Also, remove the Energy Label.Use a damp cloth to take off any glue residue.DO NOT use sharp instruments, flammable fluids, or abrasive cleaners. These can damage the air conditioner finish.

WARNING — To reduce the r isk of fire, electrical shock, injury, or sickness when using your air conditioner, follow these basic precautions:

• Plug into a grounded 3-prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Unplug air conditioner before servicing.

• Use two or more people to move or install air conditioner.

• Do not drink water collected inside the cabinet.

Air Conditioner Safety

Your safety and the safety of others are

very important.

We have provided many important safety messages in this manual and on your appliance.Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards

that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER”or “WARNING”.These words mean:

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

You can be killed or seriously injured if you don’t immediatel

y follow instructions.

You can be killed or seriously injured if you don’t follow instructions.

WARNING

DANGER

Starting your air conditioner

Operating your air conditioner properly helps you to obtain the best possible results. This section explains proper air conditioner operation.

IMPORTANT:

• If you turn the air conditioner off, wait at least 3 minutes before turning it back on.This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.

• Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C). The inside evaporator coil will freeze up and the air conditioner will not operate properly.

Operating Your Air Conditioner

Press Power ON/OFF to turn on air conditioner.When air conditioner is turned on for the first time after it is plugged in, it will display the default settings:COOL mode, FI fan speed, 72°.When it is turned on all other times, it will display the previous settings.

TEMPERATURE SELECTION

Press



to raise the temperature.Each

time you press



, the temperature will

go up 1° until it reaches 86°F. Pressto lower the temperature.Each time you

press, the temperature will go down 1° until it reaches 60°F.

POWER SAVER

Press POWER SAVER ON/OFF. Fan runs only when cooling is needed. Fan stops running when the room temperature matches the set temperature.

MODE SELECTION

Press MODE until you see the indicator light come on for the setting you want. Choose FAN or COOL.

COOL – Cools room.You can then adjust temperature by pressingor.You can select fan speed by pressing Fan Speed

FAN – Only the fan runs.Display shows “F1, F2 or F3” (fan only).

TIMER

The TIMER can be set for a delay from 1 to 12 hours until the air conditioner turns on or off.

To set the delay TIMER to turn the air conditioner off, air conditioner must be in the ON mode.To set the TIMER:

Press TIMER ON/OFF . Press TIMER ON/OFF to change delay time (from 1

to 12 hours). Press TIMER ON/OFF, or wait 10 seconds. (Light

will remain on.)

To set the delay TIMER to turn the air conditioner on, air conditioner must be in the OFF mode.To set the TIMER:

Press TIMER ON/OFF . Press TIMER ON/OFF to change delay time (from 1

to 12 hours). Press TIMER ON/OFF, or wait 10 seconds. (Light

will remain on.)

If you want to change the previous settings:

Tur n air conditioner on. Adjust MODE to FAN or COOL. Adjust FAN SPEED to F1, F2 or F3. Adjust TEMPERATURE between 60°F and 86°F. Tur n air conditioner off. Press TIMER ON/OFF . Press TIMER ON/OFF to change delay time (from 1

to 12 hours). Press TIMER ON/OFF or wait 3 seconds.

If you want to keep the previous settings:

Tur n air conditioner off. Press TIMER ON/OFF . Press TIMER ON/OFF to change delay time (from 1

to 24 hours). Press TIMER ON/OFF or wait 10 seconds.

To clear DELAY TIMER program, press TIMER until display reads “0”.Indicator light will shut off. Air conditioner can be either on or off.

To see the remaining time (in hours), press TIMER once after it has been programmed.While the display is showing the remaining time, you can press TIMER ON/OFF to increase or decrease the time.

FAN SPEED SELECTION

Press FAN SPEED until you see the display indicator light for the setting you want.Choose F1, F2, or F3.

F1 — for low fan speed F2 — for medium fan speed F3 — for high fan speed

Using your remote control

TEMPERATURE SELECTION

Pressto raise the temperature. Each time you press, the temperature will go up 1° until it reaches 86°F.

Pressto lower the temperature.Each time you press



, the temperature will go down 1° until it reaches

60°F.

FAN SPEED SELECTION

Press FAN SPEED until you see the display indicator light for the setting you want.Choose F!, F2, or F3.

F1 — for low fan speed F2 — for medium fan speed F3 — for high fan speed

TIMER

The TIMER can be set for a delay from 1 to 12 hours until the air conditioner turns on or off.

To set the delay TIMER to turn the air conditioner off, air conditioner must be in the ON mode. To set the TIMER:

Press TIMER. PressTIMER to change delay time (from 1 to 12 hours). Press TIMER, or wait 10 seconds.(Light will remain on.)

To set the delay TIMER to turn the air conditioner on, air conditioner must be in the OFF mode.To set the TIMER:

Press TIMER. Press TIMER to change delay time (from 1 to 12 hours). Press TIMER, or wait 10 seconds.(Light will remain on.)

If you want to change the previous settings:

Tur n air conditioner on.

Adjust MODE to FAN or COOL. Adjust FAN SPEED to F1, F2 or F3. Adjust TEMPERATURE between 60°F and 86°F.

Tur n air conditioner off.

Press TIMER. Press TIMER to change delay time (from 1 to 12 hours). Press TIMER or wait 3 seconds.

If you want to keep the previous settings:

Tur n air conditioner off.

Press TIMER. Press TIMER to change delay time (from 1 to 12 hours). Press TIMER or wait 10 seconds.

To clear TIMER program, press and hold TIMER for 3 seconds. Indicator light will shut off. Air conditioner can be either on or off.

To see the remaining time (in hours), press TIMER once after it has been programmed.While the display is showing the remaining time, you can press TIMER to increase or decrease the time.

MODE SELECTION

Press MODE until you see the indicator light come on for the setting you want.Choose FAN or COOL.

COOL – Cools room.You can then adjust temperature by pressingor.You can select fan speed by pressing Fan Speed

FAN – Only the fan runs. Display shows “F1, F2 or F3” (fan only).

POWER SAVER

Press POWER SAVER. Fan runs only when cooling is needed. Fan stops running when the room temperature matches the set temperature.

Power

Temp

Fan Speed

Timer Mode

Power Saver

ON/OFF

+–

Power

ON/OFF

Temp

+–

Fan Speed

Temp

+–

Timer

Mode

Power Saver

The louvers in the top of the front panel allow you to control the direction of the cooled air.Use the tabs to direct the air up, down, right, left, or straight ahead.

Changing air direction

Tabs

There are many things you can do to help save energy.

Saving energy

• Improve your home's insulation. Seal doors and windows. Close fireplace flue.

• Close blinds or drapes on the sunny side of your house. Add awnings.

• Make sure drapes or furniture do not block airflow from your air conditioner.

• Turn lights and appliances off when they are not needed.

• Ventilate your attic. High temperatures in the attic add to the air conditioner's cooling load.

• Try not to use heat-producing appliances during the hottest part of the day.

• Keep heat registers and cool-air returns closed.

• Use exhaust vent fans while cooking, doing laundry,

or bathing.

When your air conditioner is operating normally, you may hear sounds such as:

Normal operating sounds

• Droplets of water hitting the condenser, causing a “pinging” or “clicking” sound. The water droplets help cool the condenser.

• Air movement from the fan.

• Clicks from the thermostat cycle.

• Vibrations or noise due to poor wall or window

construction.

• A high-pitched hum or pulsating noise caused by the modern high-efficiency compressor cycling on and off.

1. Unplug air conditioner or disconnect power.

2. Wipe front panel and cabinet with warm water and mild

soap or detergent. Use a soft cloth.

3. Rinse control panel and dry thoroughly with a soft cloth.

4. You may use a liquid wax for appliances to polish cabinet.

5. Plug in air conditioner or reconnect power.

To ensure continued high efficiency, check condenser coils (outside of air conditioner) periodically and clean them if they are clogged with soot or dirt.

The air filter is removable for easy cleaning. A clean filter helps remove dust, lint, and other particles from the air and is important for best cooling and operating efficiency. Check the filter every 2 weeks to see if it needs cleaning.Do not operate the air conditioner without the filter in place.

1. Unplug air conditioner or disconnect power.

2. Grasp tabs on either side of filter door and pull door

forward.

3. Pull out air filter from behind grille.

4. Wash air filter in warm 104°F (40°C) water. Do not wash air filter in the dishwasher or use any chemical cleaners.Air dry filter completely before replacing to ensure maximum efficiency.

5. Replace air filter behind filter door.

6. Close filter door.

7. Plug in air conditioner or reconnect power.

Check once or twice a year for paint damage. This is very important, especially in areas near oceans or where rust is a problem. If needed, touch up with a good grade enamel paint.

NOTE: To reduce paint damage during the winter, install a heavy-duty cover over air conditioner cabinet. For information on ordering a heavy-duty cover, see page 10.

Caring for Your Air Conditioner

Repairing paint damage

Cleaning the air filter

Cleaning the air conditioner

tabs

Your new air conditioner is designed to give you many years of dependable service.This section tells you how to clean and care for your air conditioner properly. Call your local authorized dealer for an annual checkup.Remember… the cost of this service call is your responsibility.

Check if ...

The power supply cord is unplugged.

A household fuse has blown or circuit breaker has tripped.

The local power has failed.

Then ...

Firmly plug the power supply cord into a live outlet with proper voltage.

Replace the fuse or reset the circuit breaker.Make sure the air conditioner is plugged into a properly grounded outlet as described in the Installation Instructions.

Wait for power to be restored.

You can solve many common air conditioner problems easily, saving you the cost of a service call.Try the suggestions below to see if you can solve your problem without outside help.

Air conditioner blows fuses or trips circuit breakers.

Check if ...

Too many appliances are being used on the same circuit.

Time-delay fuse or circuit breaker of the wrong capacity is being used.

An extension cord is being used.

You are tr ying to restart the air conditioner too soon after turning it off.

Then ...

Unplug or relocate appliances that share the same circuit.

Replace with a 15-amp time-delay fuse or circuit breaker of the correct capacity. See “Electrical requirements” in the Installation Instructions for the correct capacity.

Do not use an extension cord with this or any other appliance.

Wait at least 3 minutes after turning air conditioner off before trying to restart the air conditioner.

Air conditioner seems to run too much.

Check if ...

The current air conditioner replaced an older model.

The air conditioner is in a heavily occupied room or heatproducing appliances are in use in the room.

Then ...

The use of more efficient components may cause the air conditioner to run longer than an older model, but the total energy consumption will be less.Newer air conditioners do not emit the “blast” of cold air you may be accustomed to from older units, but this IS NOT an indication of lesser cooling capacity or efficiency. Refer to the efficiency rating (EER) and capacity rating (in BTUs/hr.) marked on the air conditioner.

Use exhaust vent fans while cooking or bathing and try not to use heat-producing appliances during the hottest part of the day.A higher capacity air conditioner may be required depending on the size of the room being cooled.

Troubleshooting

Air conditioner will not operate.

Air conditioner cycles on and off too much, or does not cool room in cooling mode.

Check if ...

The air conditioner is not properly sized for your room.

The filter is dirty or obstructed by debris.

The inside evaporator and outside condenser coils are dirty or obstructed by debris.

There is excessive heat or moisture (open container cooking, showers, etc.) in the room.

The louvers are blocked.

The outside tempera

ture is

below 65°F (18°C). The temperature of the room

you are trying to cool is extremely hot.

Windows or doors to the outside are open.

The temperature set point is not at a cool enough setting.

The air conditioner is installed on the sunny side of your house.

Then ...

Check the cooling capabilities of your room air conditioner. Room air conditioners are not designed to cool multiple rooms.

Clean the filter.See page 7.

Clean the inside evaporator and outside condenser coils.See page 7.

Use a fan to exhaust heat or moisture from the room.Try not to use heat-producing appliances during the hottest part of the day.

Install the air conditioner in a location where the louvers are free from curtains, blinds, furniture, etc.

Do not try to operate your air conditioner in the cooling mode when the outside temperature is below 65°F (18°C).

Allow extra time for the air conditioner to cool off a very hot room.

Close all windows and doors.

Adjust the temperature set point to a cooler setting. Set FAN SPEED to a higher setting.

Install your air conditioner in a more shaded window.

Check if ...

The air conditioner is not properly leveled.The air conditioner should slope slightly downward toward the outside.

Then ...

Level the air conditioner to provide a downward slope toward the outside (1⁄2 bubble on a carpenter’s level) to ensure proper drainage. See the Installation Instr uctions. Reposition or shim the cabinet as necessary.

NOTE: Do NOT drill a hole in the bottom of the metal base and condensate pan.

Water drips from cabinet into your house.

You can order the following accessories for your air conditioner from your local authorized dealer or by calling 1-800-253-1301 from anywhere in the U.S.A. You will hear a recording. Follow the instructions to place an order.

Replacement air filters

A good, clean air filter is important for best cooling with least energy consumption.Your air filter should be cleaned regularly. See page 7 for cleaning instructions.We suggest you replace your air filter once a year.

Ordering Accessories

Installation kits

A standard installation kit is included with your air conditioner.These special installation kits are available:

• Outside Sill Bracket Kit

• Wide-Window Kit

Heavy-duty cover

If you decide to leave your air conditioner installed during the winter, a heavy-duty cover will help protect your air conditioner and reduce drafts.The cover protects against cold drafts through the unit’s air passages and protects the cabinet from snow, rain, sleet, rust, and dust.

For a heavy-duty cover sized to fit your air conditioner, order part #484069.

To avoid unnecessary ser vice calls, please check the “Troubleshooting Guide” section. It may save you the cost of a service call. If you still need help, follow the instructions below.

Call the Customer Interaction Center telephone number.Dial toll-free 1-800-253-1301. Our consultants are available to assist you.

When calling: Please know the purchase date, and the

complete model and serial number of your appliance (see the "A Note to You" section). This information will help us better respond to your request.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances

• Installation information

• Use and maintenance procedures

• Accessory and repair parts sales

• Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc.)

• Referrals to local dealers, service companies, and repair parts distributors

Our service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in the United States.

To locate the author ized service company in your area, you can also look in your telephone directory Yellow Pages.

If you need to order replacement parts, we recommend that you only use factory-authorized parts. These parts will fit right and work right, because they are made to the same exacting specifications used to build every new appliance.

To locate factory-author ized par ts in your area, call our Customer Interaction Center telephone number, your nearest authorized service center, or Factory Service at 1-800-442-1111.

If you need further assistance, you can write to ask any questions or tell us about your concerns to:

Whirlpool Corporation Customer Interaction Center 553 Benson Road Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Requesting Assistance or Service

If you need assistance or service

If you need replacement parts

For further assistance

electric drill and 3/32" or smaller bit

Tools needed

Parts supplied

Installation Instructions

Important: Read and save these instructions.

Important:

• Installer: Leave Installation Instructions with the homeowner.

• Homeowner: Keep Installation Instructions for future reference.

• Save Installation Instructions for local electrical inspector‘s use.

22” - 36”

(55.9 cm - 91.4 cm)

14” (35.6 cm)

Window opening measurements

Important: Observe all governing codes and ordinances.

Check location where air conditioner will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation.

The location should provide:

• Grounded electrical outlet within four feet (122 cm) of the window or through-the-wall location. Do not use an extension cord.

• Free movement of air to rooms to be cooled.

• A large enough opening for the air conditioner.

22" (55.9 cm) minimum to 36" (91.4 cm) maximum opening width 14" (35.6 cm) minimum opening height

• Adequate wall support for weight of air conditioner. Air conditioner weighs between 90 and 178 pounds (40.8 to 80.7 kg).

Do not install the air conditioner in an area where the front panel will be exposed to heat sources that will raise the panel surface temperature above 120°F (50°C).

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

flat-blade and Phillips screwdrivers

level

gloves

utility knife

safety glasses

tape measure

Location

short screw

wood screw

L bracket

seal strip

sash seal

guide panel

WARNING

Electrical requirements

Electrical Shock Hazard Plug into a grounded 3-prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in

death, fire , or electrical shock.

In the U.S. only: If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Check with a qualified electrician if you are not sure air conditioner is grounded.

A three-wire, single-phase, 60-Hz, AC-only, electrical supply is required on a separate circuit. See model and serial label for circuit amperage required for your specific model.

A time delay fuse or circuit breaker is required .Use copper wire only.

The model and serial label is located behind the front panel on the cabinet.This label lists the BTU capacity, amperage, voltage and refrigerant charge requirements.

Recommended grounding method

For your personal safety, this air conditioner must be grounded.This air conditioner is equipped with a power supply cord with a 3-prong grounding plug.To minimize possible electrical shock hazard, the cord must be plugged into a mating 3-prong grounding-type outlet, grounded in accordance with all local codes and ordinances. If a mating 3-prong grounding-type outlet is not available, it is the consumer’s responsibility to have a properly grounded, 3-prong outlet installed by a licensed installer.

It is the customer’s responsibility:

• To contact a qualified electrical installer.

• To assure that the electrical installation is adequate

and in conformance with National Electrical Code, ANSI/NFPA 70 — latest edition,* and all local codes and ordinances.

Copies of the standards listed may be obtained from: * National Fire Protection Association

Batterymarch Park Quincy, Massachusetts 02269.

Power supply cord and receptacle

• 115 volt (103.5 min. - 126.5 max.)

• 0-12 amperes

• 15-amp time-delay fuse or circuit breaker

• 14 gauge copper wiring

WARNING

Window preparation

Installation

If storm window frame interferes with air conditioner, attach a 2" (5 cm) -wide wood strip to inner window sill, across full width of sill.Wood strip should be thick enough to raise height of window sill so that you can install air conditioner without interference from storm window frame, so that condensation water properly drains to the outside.

Note: If distance between stor m window frame and inner sill-mounted wood strip is greater than 1 inch (2.5 cm), wood strip for outer window sill (described in right column) is not necessary.

1.Insert guide panels into air conditioner guides.

2.Attach curtains to air conditioner with short screws.

4.Open window and mark centerline of inner sill.

5.Attach one L bracket 8 inches (20.3 cm) from either

side of centerline, flush against back of inner window sill, with short side of bracket in vertical position. Brackets will help hold air conditioner in place. Use 2 shor t screws.

3.Cut adhesive-backed seal strip to window width.

Remove backing from seal strip.Attach seal str ip to bottom of window.

Note: Maintain a firm hold on air conditioner to prevent it from falling out of the opening during installation.

short

screws

short

screws

seal strip

inner sill

room side

centerline

inner sill

short

screw

outer sill

L bracket

centerline

INSIDE

OUTSIDE

(20.3 cm)

Attach a second wood strip, approximately 6" x 1-1/2" x 2" (15.2 cm x 3.8 cm x 5 cm) in center of outer window sill, flush against back of inner sill.This wood strip will raise the L brackets to hold air conditioner securely in place.

inner sill

wood strip for L bracket

(2.5 cm)

max.

wood strip mounted on top of inner sill

outer sill

storm window frame

3/4" (19 cm)

clearance

OUTDOORS

INDOORS

6.Carefully lift air conditioner and slide it into open

window.Make sure bottom guide of air conditioner drops into L bracket.Be sure that air conditioner is centered in window from right to left.

1. Turn air conditioner off and disconnect power cord.

2.Remove L brackets and screws installed through top

and bottom of guide panels. Save for reinstallation.

3.Close guide panels.

4.Raise window sash and carefully tilt air conditioner

backward to drain any condensate water in base.

5.Lift air conditioner from window and remove sash

seal from between windows.

7.Lower window sash down behind upper guide of air

conditioner.Make sure the air conditioner tilts to the back as shown.

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

window frame

seal

about 1/4" (6.3 mm)

upper guide

bottom guide

L bracket

short

screw

sash seal

wood

screw

8.Extend guide panels to fill window opening. Use 4

wood screws.

9.Insert sash seal behind top of lower window sash

and against glass of upper window.

Removing air conditioner from window

10.

Fasten L bracket using a short screw.

WARNING

+ 30 hidden pages