Whirlpool 6LBR6233BQ0 User Manual

*
Home Appliances
Use And Care
GUIDE
A Note to You ......................... 2
Washer Safety ........................ 3
Parts and Features................. 4
Operating Your Washer......... 5
Starting your washer .......... 5
your washer........................ 6
Selecting a cycle and time ... 7
Using rinse and spin........... 8
Using drain and spin........... 8
Understanding normal
washer sounds ................... 8
Understanding what
happens in each cycle........ 9
MAGIC CLEAN* lint filter...... 9
Adding liquid chlorine
bleach............................... 10
Adding liquid fabric
softener ............................ 10
Caring for Your Washer ...... 11
Laundry Tips ........................ 12
Removing Stains.................. 16
Troubleshooting................... 19
Requesting Assistance or
Service in the U.S.A. ........... 21
Requesting Assistance or
Service in Canada ............... 22
Warranty ............................... 23
3366867
TWO SPEED AUTOMATIC WASHER

A Note to You

Thank you for buying a WHIRLPOOL* appliance.
Because your life is getting busier and more complicated, WHIRLPOOL washers are easy to use, save time, and help you manage your home better. To ensure that you enjoy years of trouble-free operation, we developed this Use and Care Guide. It contains valuable informa­tion about how to operate and maintain your washer properly and safely. Please read it carefully. Also, please complete and mail in the Ownership Registration Card provided with your appliance. The card helps us notify you about any new information on your appliance.
Please record your model’s information.
Whenever you call to request service on your appliance, you need to know your complete model number and serial number. You can find this information on the model and serial number plate (see diagram on page 4 for location of plate).
Please also record the purchase date of your appliance and your dealer’s name, address, and telephone number.
Keep this book and the sales slip together in a safe place for future reference.
Model Number _________________________ Serial Number _________________________ Purchase Date _________________________ Dealer Name __________________________ Dealer Address ________________________ Dealer Phone __________________________
In the U.S.A., call our Consumer Assistance Center toll-free.
1-800-253-1301
In Canada, contact your dealer, or nearest Inglis Limited Appliance Service Branch.
2

Washer Safety

Your safety is important to us.
This guide contains safety statements under warning symbols. Please pay special attention to these symbols and follow any instructions given. Here is a brief explana­tion of the symbol.
IMPORTANT SAFETY INSTRUCTIONS
This symbol alerts you to hazards such as fire, electrical shock, or other injuries.
WARNING – To reduce the risk of fire, electric shock, or injury to
persons when using the washer, follow basic precautions, including the following:
Read all instructions before using
the washer.
Do not wash articles that have
been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable, or explosive substances as they give off vapors that could ignite or explode.
Do not add gasoline, dry-cleaning
solvents, or other flammable, or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
Under certain conditions, hydro-
gen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLO­SIVE. If the hot water system has not been used for such a period, before using a washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
Do not allow children to play on
or in the washer. Close supervi­sion of children is necessary when the washer is used near children.
Before the washer is removed
from service or discarded, re­move the door.
Do not reach into the washer if
the tub or agitator is moving.
Do not install or store the washer
where it will be exposed to the weather.
Do not tamper with controls.
Do not repair or replace any part
of the washer or attempt any servicing unless specifically recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.
See Installation Instructions for
grounding requirements.
– SAVE THESE INSTRUCTIONS –
3

Parts and Features

The parts and features of your washer are illustrated on this page. Become familiar with all parts and features before using your washer. Page references are included next to some features. Refer to those pages for more information about the features.
Water temperature selector
(p. 6)
Cycle control knob
Load size selector
(p. 6)
Heavy Duty • Large Capacity Heavy Duty • Large Capacity
Medium
Medium
Small
Small
Load SizeLoad Size
Permanent
Normal
Normal
Press
Spin
Spin
Light
Light
Off
Rinse
Normal
Normal
8
4
PausePause
Cool
6
6
Down
Warm
On
Off
Cold
Cold
Hot
Cold
Cold
Large
Large
WashWash
Extra RinseExtra Rinse
RinseRinse
Except Hand WashablesExcept Hand Washables
Temperature
7 Cycle - 1 Speed
Regular
12
12
Heavy
Rinse
f
f
f
f
O
O
Spin
Pull StartPull Start
4
4
Push StopPush Stop
f
f
f
f
O
O
Pre - Wash
8
Soak
20
20
Short
f
f
f
f
O
O
Spin
Spin
Rinse
Soak
Liquid chlorine
bleach dispenser
Model and serial
(pp. 6-8)
(p. 10)
number plate
(under lid)
Basket
Tub
MAGIC CLEAN*
lint filter
(bottom of washer basket)
(p. 9)
4

Operating Your Washer

To obtain the best washing results, you must operate your washer properly. This section gives you this important information. Page references are included for more information.
wWARNING
Explosion Hazard
Never place items in the washer that are dampened with gasoline or other flammable fluids.
Do not wash or dry items soiled with vegetable or cooking oils because they may contain some oil after laundering.
Doing so can result in death, explo­sion, or fire.

Starting your washer

1. Add measured detergent to the
washer. Then place a sorted load of clothes in the washer.
Sort and load clothes as described on
pages 12 and 13.
If desired, you may also add color safe
bleach or extra detergent for the Super Wash cycle.
2. (OPTIONAL STEP) If desired, pour
measured liquid chlorine bleach into the bleach dispenser. (See page 10.)
Use only liquid chlorine bleach in the
bleach dispenser.
3. Close the washer lid.
wWARNING
Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Failure to follow these instructions
can result in death or electrical shock.
Liquid chlorine bleach dispenser
continued on next page
5
OPERATING YOUR WASHER
4. Turn the Load Size selector to the
setting that corresponds with the size of your wash load and the type of fabric being washed.
The Load Size Selector has three load
size settings: small, medium, and large.
To change the load size setting after the
washer has started to fill, turn the Selector to the desired new setting.
5. Select a wash-rinse temperature with
the Water Temperature selector. Match the water temperatures with the type of fabric and soils being washed.
See page 14 for water temperature
guidelines.
Three wash-rinse temperatures are
available: hot-cold, warm-cold, and cold-cold.
6. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle you want.
Medium
Small Large
Load Size
Warm
Cold Cold
Temperature
Cold
Wash Rinse
Hot
Cold
7. Pull out the Cycle Control Knob to
start the washer.
8. (OPTIONAL STEP) If desired, add
measured liquid fabric softener to the rinse water. See page 10.

Stopping/restarting your washer

To stop the washer at any time, push in
the Cycle Control Knob.
To restart the washer, close the lid (if open)
and pull out the Cycle Control Knob.
6
OPERATING YOUR WASHER

Selecting a cycle and time

This section illustrates and describes the wash cycles you can select with the Cycle Control Knob. Use this information to help you make the best cycle selections for your wash loads. Each cycle is designed for different types of fabrics and soil levels.
The washer pauses briefly throughout
each cycle. These pauses are normal for washer operation.
Refer to page 8 to learn more about the
sounds you may hear during a wash cycle.
Refer to page 9 to help you understand
what happens during a wash cycle.
Super Wash cycle
The Super Wash cycle (18 minutes) features
an extended wash time for washing heavily soiled loads that need
Super Wash
18
maximum soil removal.
For improved cleaning, use two times the amount of detergent
recommended for a wash cycle.
Normal cycle
The Normal cycle features the Gentle Wash
system, and high
Spin
Normal
Regular
Heavy
Rinse
Off
agitation and spin
10
14
speeds to shorten drying time. Use this cycle for cleaning cotton and linen
fabrics. Select 10 (Regular) or 14 (Heavy) minutes of wash time, depending on whether your load is moderately or heavily soiled.
Permanent Press cycle
The Permanent Press cycle features the
Permanent
Regular
Press
Light
10
6
Pause
Cool Down
Rinse
Spin
Off
Select 6 (Light) or 10 (Regular) minutes of wash time, depending on whether your wash load is lightly or moderately soiled.
Gentle Wash system, a cool-down rinse, and low spin speeds to reduce wrinkling. Use this cycle for cleaning permanent press and some synthetic fabrics.
Delicates cycle
The Delicates cycle features a reduced
agitation speed for gentle soil removal. Low spin speeds reduce wrinkling. Use
6
Rinse
Spin
Off
Delicates
6 minutes of wash time for cleaning lightly to moderately soiled
delicate items and washable knits.
Soak cycle
The Soak cycle features brief periods of
agitation and soak time to help remove heavy soils and stains that need pretreatment.
Use warm water
when soaking laundry. Hot water can set
Pre-Wash
Off
Spin
4
20
Soak
stains. See pages 16 to 18 for stain removal information.
Use the amount of detergent or pre-
soak additive recommended by the manufacturer.
After the Soak cycle ends, add detergent
and set a new wash cycle.
Pre-Wash cycle
The 4-minute Pre-Wash cycle features high-
speed agitation to help remove heavy soils and stains that need pretreatment. Once the Pre-Wash period ends, add detergent and start a new wash cycle.
Pre-Wash
Off
Soak
4
20
7
OPERATING YOUR WASHER

Using rinse and spin

When using extra detergent for heavily soiled clothes, or washing special-care items, you may find an extra rinse and spin is needed.
1. For an additional rinse, push in the Cycle
Control Knob and turn clockwise to Rinse, as illustrated.
2. Pull out the Cycle Control Knob. The
washer fills to selected load size, agitates, drains, and spins.

Using drain and spin

A drain and spin may help shorten drying times for some heavy fabrics or special-care items by removing excess water.
1. Push in the Cycle Control Knob and turn
clockwise to Spin, as illustrated.
2. Pull out the Cycle Control Knob. The
washer drains, then spins.
Regular
Heavy
Super Wash
Pre-Wash
Regular
Heavy
Super Wash
Pre-Wash
Normal
Normal
Off
10
14
18
Off
Spin
4
Rinse
20
Spin
Soak
10
14
18
Off
Spin
4
Soak
Off
Spin
Rinse
Off
Rinse
20
Spin
Off
10
10
6
Pause
Off
6
Regular
Light
6
Pause
Cool
Off
6
Light
Cool
Down
Rinse
Spin
Delicates
Down
Rinse
Spin
Delicates
Press
Pull Start
Push Stop
Permanent Press
Pull Start
Push Stop
Permanent
Regular
Spin
Rinse

Understanding normal washer sounds

Your new washer may make sounds that your old one didn’t. Because the sounds are unfamiliar, you may be concerned about them. Don’t be; most of them are normal.
The following describes some of the sounds you may hear and what causes them.
During washing
When you select a small load size setting for a small wash load, the water level in your washer is lower. With this lower water level, you may hear a clicking sound from the upper portion of the agitator.
8
During drain
The rate that water is drained from your washer depends on your installation. If water is drained quickly from the washer, you may hear air being pulled through the pump. This happens during the end of draining.
After drain and before spin
When the cycle changes from draining to spinning, you may hear gears engaging.
OPERATING YOUR WASHER

Understanding what happens in each cycle

When the Cycle Control Knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down.
During agitation, the XTRA ROLL ACTION*
agitator creates a continuous rollover action that provides a thorough cleaning of the wash load.
After agitation starts, the Cycle Control Knob turns clockwise until it points to an OFF area and the cycle ends.
NOTES:
The washer pauses briefly throughout
each cycle. These pauses are normal for washer operation.
A Gentle Wash system helps protect your
fabrics by reducing wash agitation speed during the last few minutes of wash agitation in the Normal and Permanent Press cycles.
WASH
Fill
Wash selected time
Drain
no agitation
The Permanent Press cycle partially drains, fills, agitates briefly, and drains.
Spin
MAGIC CLEAN* lint filter
The lint filter at the bottom of the washer basket cleans itself. During agitation, wash and rinse water passes over the filter, separating the lint from the water. The lint is then spun away from the filter and out of the system during the spin part of the cycle.
If your washer drains into a tub, remove any lint collected in the tub or strainer.

MAGIC CLEAN lint filter

RINSE
Fill
Rinse
Drain
no agitation
Spin-spray rinse
Spin
Off
Basket interior
9
OPERATING YOUR WASHER

Adding liquid chlorine bleach

Use your washer’s liquid chlorine bleach dispenser to add bleach to the wash load. Always measure liquid chlorine bleach. Do not guess. Never use more than 1 cup (250 mL) for a full load. Use less with lower water level settings. Follow manufacturer’s directions for safe use. Use a cup with a pouring spout to avoid spilling.
1. Load the washer.
2. Pour measured chlorine bleach carefully
into the dispenser. Do not let bleach splash, drip, or run down into washer basket. Undiluted bleach will damage any fabric it touches.
3. Start the washer. Bleach will be diluted
automatically during wash part of cycle.
NOTE: Do not use this dispenser to add
powdered chlorine or color safe bleach to your wash load. The dispenser is for liquid chlorine bleach use only.

Adding liquid fabric softener

Always dilute fabric softener with 1⁄2 to
1 cup (125 to 250 mL) warm water. Undiluted fabric softener can stain fabrics.
Add diluted fabric softener only in the final
rinse.
Fabric softener should not be mixed with
other laundry products because greasy stains may form. If stains form, remove by wetting the stain and rubbing with liquid detergent or a bar of soap. Rewash the stained item.
Too much fabric softener can make some
items (diapers and towels) nonabsorbent. If this happens, use less fabric softener or do not use it every time.
10

Caring for Your Washer

Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely.
Cleaning your washer
Exterior
Wipe up detergent, bleach, and other spills
with a soft, damp cloth or sponge as they occur. Occa­sionally wipe the outside of the washer to keep it looking like new.
Do not put sharp or metal objects in your
washer. They can damage the finish. Check all pockets for pins, clips, money, bolts, nuts, etc. Do not lay these objects on your washer after emptying pockets.
Winter storage or moving care
Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing weather, winterize it.
To winterize washer:
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. Put 1 quart (1L) of R.V.-type antifreeze in
the basket.
4. Run washer on a drain and spin setting
(see page 8) for about 30 seconds to mix the antifreeze and water.
5. Unplug the power supply cord.
Interior
Clean interior with 1 cup (250 mL) of chlo­rine bleach mixed with 2 cups (500 mL) of detergent. Run washer through a complete cycle using hot water. Repeat process if necessary.
NOTE: Remove hard water deposits using
only cleaners labeled as washer safe.
To use washer again:
1. Flush water pipes and hoses.
2. Reconnect water inlet hoses.
3. Turn on both water faucets.
4. Reconnect power supply cord.
5. Run the washer through a complete cycle
with 1 cup (250 mL) of detergent to clean out antifreeze.
Non-use or vacation care
Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time, you should:
Unplug the power supply cord or turn off
electrical power to the washer.
Turn off the water supply to the washer.
This helps avoid accidental flooding (due to a water pressure surge) while you are away.
11

Laundry Tips

This section reviews proper laundering techniques and gives you additional washing information.
Preparing clothes for washing
Close zippers, snaps, and hooks to avoid
snagging other items. Remove pins, buckles, and other hard objects to avoid scratching the washer interior. Remove non­washable trim and ornaments.
Empty pockets and turn them inside out.
Turn down cuffs, brush away lint and dirt.
Turn synthetic knits inside out to avoid pilling.
Sorting
Separate heavily soiled items from lightly
soiled ones, even if they would normally be washed together. Separate lint givers (towels, chenille) from lint takers
(corduroy, synthetics, perma­nent press). When possible, turn lint givers inside out.
Tie strings and sashes so they will not
tangle.
Mend tears, loose hems, and seams.
Treat spots and stains. (See “Removing
Stains” on pages 16-18.)
Stained or wet garments should be
washed promptly for best results.
Separate dark colors from light colors,
colorfast items from noncolorfast items.
Sort by fabric and construction (sturdy
cottons, knits, delicate items).
Loading
Drop items into washer loosely. Fill to the
top of the basket (top row of
holes). Do not wrap items
around the agitator. Items
should move easily through
wash water for best cleaning and wrinkle-free results. Items should sink and reappear later.
Load washer properly and select correct
load size setting. Overloading or packing the machine, and selecting a setting too small for the wash load can:
– cause poor cleaning. – increase wrinkling. – create excessive lint. – wear out items faster (because of pilling).
12
Load by the amount of space items take
up, not by their weight.
Mix large and small items in each load.
Load evenly to maintain washer balance. An off­balance load can make the washer vibrate during spin.
Use a large load size setting to reduce
wrinkling with permanent press clothes and some synthetic knits. These items should have more room to move in the water than heavy items (towels, jeans).
Reduce wash time when using a small
load size setting. Loads with only a few small items need less wash time.
LAUNDRY TIPS
Loading suggestions
For these suggested full-sized loads, set the Load Size Selector to the highest load size setting.
LARGE CAPACITY PLUS WASHERS Heavy Work
Clothes
2 pair pants 3 shirts 3 pair jeans 1 coverall
Knits
2 slacks 2 blouses 4 shirts 4 tops 2 dresses
Permanent Press
1 double sheet 1 tablecloth 1 dress 1 blouse 2 slacks 3 shirts 2 pillowcases
Mixed Load
2 double or
1 king size sheet(s) 4 pillowcases 6 T-shirts 6 pair shorts 2 shirts 2 blouses 6 handkerchiefs
Towels
8 bath towels 8 hand towels 10 wash cloths 1 bath mat
Delicates
2 camisoles 4 slips 4 panties 2 bras 2 nighties
Saving energy
Use warm or cold wash water for most
loads. Use hot water only when washing heavy, greasy soils or whites.
Wash full loads.
Use lower water levels when washing
small loads.
Avoid rewashing. Use enough detergent
and pretreat stains or heavy soils. Use the cycles and wash times recommended for the fabric and soil.
Use your washer during off-peak hours –
usually early morning and late evening. (Ask your power company.)
13
LAUNDRY TIPS
Water guidelines
Selecting water temperatures
WASH WATER TEMPERATURE
HOT
130°F (54°C) or above
WARM
90-110°F (32-44°C)
COLD
70-90°F (21-32°C)
The washer features cold rinses for all wash temperatures.
Checking hot water temperature
Your hot water should be 130°F (54°C) or above. If you do not know your hot water temperature, you can check it easily. You may need to raise the temperature of your water heater. To check your hot water:
1. Fill a pan with the hottest water available
from the faucet that fills your washer.
NOTE: If you do not have a faucet at your
washer site, collect the water from the faucet closest to your washer.
2. Place a candy thermometer or cooking
thermometer in the water to check the temperature.
SUGGESTED FABRICS
Work clothes
Sturdy whites/colorfast
pastels
Diapers
Dark/noncolorfast colors
Permanent press items
Nylon, polyester, acrylics,
silks, woolens
Knits/delicate fabrics
Extra-sensitive colors
Noncolorfast items
Hand washables
COMMENTS
Best cleaning for heavily soiled items
Removes oils, perspiration, greasy
soils, and stains
Prevents graying or yellowing
Best for moderately soiled to lightly
soiled items
Safe for most fabric finishes
Less fading and dye bleeding
Reduces wrinkling
Best for very lightly soiled items
Saves hot water
Best rinse water temperature
Water hardness
Many poor washing results can be traced to the hardness of the wash water. To check your water hardness:
City water – ask the city water company.
Well water – ask the local water authority.
Ask for the mineral content in grains/gallon or parts/million. If your water is more than 8 grains/gallon or more than 137 parts/ million, you should consider:
Installing a water softener.
Using more detergent.
Using a packaged water conditioner.
Not using soap.
NOTE: In wash water temperatures colder
than 70°F (21°C), detergents do not dissolve well. Also, soils may be difficult to remove, and some fabrics may retain wear wrinkles and may have increased pilling.
14
LAUNDRY TIPS
Washing special-care items
Most garments and household textiles have care labels with laundering instructions. Always follow care label directions when they are available. Below are general washing instruc-
tions for some special washables.
ITEM Blankets
(electric or woolen)
Curtains, drapes, slipcovers
Diapers
Elastic, spandex
Flame-retardant clothing
Knits, washable
CARE INSTRUCTIONS
Pretreat spots and stains. Select water temperature, cycle, and time according to the type of blanket being washed. Two rinses may be necessary. Check care label to see if manufacturer recommends machine washing.
Wash small loads. Crowding may cause wrinkling. Replace slipcovers while still slightly damp. They will dry to fit tightly.
NOTE: Sun-damaged curtains and draperies will tear whether
hand or machine washed. When using chlorine bleach for soaking, add extra detergent to
the load. Avoid overuse of fabric softeners – absorbency will be reduced.
Elastic picks up oil from the body. Oil can damage elastic. Wash often to reduce the damage. Use warm water and sufficient detergent to remove oils. Do not use chlorine bleach.
Items will be clearly labeled as flame-retardant. Follow manufacturer’s instructions to retain flame-retardant qualities.
Knits are comfortable to wear because they stretch. However, this means that knits are more likely to be stretched and dam­aged when washed (especially bulky knits). Knits made of synthetic fabrics such as polyester, nylon, and acrylic tend to keep their original shape more than knits made of cotton or ramie.
Pillows, stuffed toys
Plastic, rubber items
Quilts, bedspreads
Scatter rugs
Snowsuits, jackets
Washing feather pillows is not recommended unless they will be dried in a dryer.
Treat as delicate items. Wash in warm water. Wash small items in a mesh bag.
Do not wash cotton-filled comforters unless they are quilted or stitched. Tucked cotton batting tends to slip and become lumpy. An extra rinse may be necessary.
Shake or vacuum rugs to remove loose dirt. Wash more than one rug at a time. If washing only one rug, add bath towels to balance the load.
Wash only one or two items at a time. You may need to stop the washer occasionally to press air from the items being washed. An extra rinse may be necessary.
15

Removing Stains

Stained, heavily soiled, or greasy items may need to be prewashed or soaked for best results. Soaking helps remove protein-type stains like blood, milk, or grass. Prewashing helps loosen soil before washing.
Stain removal rules
Use warm water for soaking or prewashing
stained laundry. Hot water can set stains.
Most stains are easier to remove when
they are fresh. Old or set stains may not come out. Follow package directions for pretreatment products.
Before treating any stain, find out what
kind of stain it is, how old the stain is, what kind of fabric it is, and if the fabric is colorfast. (Check the care label.)
Washing and drying can set some stains.
Start with cold or warm water. Hot water
can set some stains.
Stain removal guide
When bleach is recommended, use a
bleach that is safe for the fabric.
Test stain removers on an inside seam or
hidden corner of the item to see if the color is removed.
Put the stained area face down on a paper
towel or white cloth. Apply the stain remover to the back of the stain. This forces the stain off the fabric instead of through it.
Meat tenderizer or enzyme presoaks help
break down some protein stains so they are easier to remove.
STAIN Alcoholic
beverage
Blood
Chewing gum
Chocolate or coffee
Crayon and candle wax
Cream, milk, or ice cream
TO REMOVE
These stains turn brown with age, so treat immediately. Sponge or soak fresh stains with cold water. Wash. If stain remains, soak 15 minutes in a solution of lukewarm water, liquid detergent, and a few drops of white vinegar. Rinse. Wash.
Rinse immediately or soak in cold water with enzyme presoak for 30 minutes or longer. Rinse. Rub detergent into any remaining stains. Rinse. If stain remains, put a few drops of 3% hydrogen peroxide on stain for 3-5 minutes. Rinse thoroughly. Wash.
Use ice to make gum hard. Scrape off what you can. Sponge with a nonflammable fabric cleaner. Let dry. Wash.
Sponge immediately with a nonflammable fabric cleaner or apply a prewash soil and stain remover. Rinse. Wash. If stain remains, apply a liquid deter­gent to stain or soak in warm water with an enzyme presoak. Rewash.
Scrape off excess with a dull knife. Place fabric between two blotters or facial tissue. Press with warm iron. Remove color stain with nonflammable fabric cleaner. Hand wash until stain is gone. If full load is crayon stained, take to cleaners or coin-operated dry cleaning machine.
Sponge with a nonflammable fabric cleaner, or a prewash soil and stain remover. Rinse. Wash. Repeat if necessary. If stain remains, apply a few drops of liquid detergent and a few drops of ammonia. Blot dry and rinse. If stain remains, soak in an enzyme presoak. Wash.
16
Loading...
+ 36 hidden pages