GB 6ADP 951 |
PROGRAMME CHART |
Important:
•If a fault occurs or you wish to change the current programme, press the “START” button for about 5 seconds until the Start indicator lamp switches off ! Refer to the “Troubleshooting guide” in these user instructions to remedy any problems.
•Switch off the dishwasher once the “Start” indicator lamp has switched off.
If you switch off the dishwasher during a wash cycle, when switched on again the dishwasher resumes the cycle from where it was interrupted.
50° 65° 65° 70°
|
eco |
End |
Start |
0
Start button indicator lamp:
Switches “on” when the dishwasher is operating.
Flashes when a fault occurs.
Switches “off” at the end of the programme.
Programme selector
0 = Off.
Programme progress indicators
|
Pre-rinse |
Rinse aid |
|
||
|
Add rinse aid |
|
|
Washing
Drying
Programme end
|
|
|
Final rinse |
Detergent dispenser: |
|
|
Consumption *** |
||||
|
|
|
+) with pre-rinse |
|
|
|
|
|
|
||
|
|
|
temperature: |
|
Normal load |
|
|
|
|||
|
Symbol |
Load |
-) without pre-rinse |
|
|
|
|
||||
|
|
|
|
|
|
||||||
|
Programm |
Crockery and cutlery |
|
** small |
large |
Water |
Energy |
Time |
|
|
|
|
|
|
|
compart- |
compart- |
|
|
|
|||
|
|
|
|
(Liter) |
(kWh) |
(Min.) |
|
|
|
||
|
|
|
|
ment |
ment |
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
Cold pre-rinse |
Crockery to be washed later. |
- |
- |
- |
5.0 |
0.02 |
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eco 50 °C * 1) |
Normally or heavily soiled crockery with dried-on food. |
65 °C |
+ |
+ |
18.0 |
1.40 |
87 |
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal 65 °C |
Normally soiled crockery. |
65 °C |
- |
+ |
14.0 |
1.50 |
73 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Normal 65 °C |
Normally or heavily soiled crockery. |
65 °C |
+ |
+ |
19.0 |
1.55 |
87 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Intensive 70 °C |
Heavily soiled pans and saucepans. |
65 °C |
+ |
+ |
22.5 |
1.75 |
93 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*) |
Recommended programme for use with “new generation” enzyme-based detergents. |
**) |
For pre rinse. |
***)Values for normal conditions. Values may vary in relation to usage, e.g.: different loads, water temperatures, water hardness and power supply voltage. 1) Check the programme on the energy data plate.
5019 100 91059
Loading...