INSTRUCTION SHEET
for 676241 Overload Protector
wWARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or electrical shock.
Before installing in vacuum cleaner, make sure to slip the felt seal over the overload protector button, as shown. The seal is used as a product improvement to keep dirt from entering the overload protector housing.
Seal
Overload protector
INSTRUCTION SHEET
for 676241 Overload Protector
wWARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or electrical shock.
Before installing in vacuum cleaner, make sure to slip the felt seal over the overload protector button, as shown. The seal is used as a product improvement to keep dirt from entering the overload protector housing.
Seal
Overload protector
© Whirlpool Corporation 1998 |
Instruction Sheet 676238 Rev. A 1/98 |
© Whirlpool Corporation 1998 |
Instruction Sheet 676238 Rev. A 1/98 |
(All Rights Reserved) |
|
(All Rights Reserved) |
|
Loading...