Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word “DANGER” or
“WARNING.” These words mean:
You will be killed or seriously injured if you don't
DANGER
WARNING
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
precautions:
■
Plug into a grounded (earthed) outlet.
■
Do not remove ground prong.
■
Do not use an adapter.
■
Do not use an extensio n cord.
■
Disco n n e c t po wer befo re s er v ic i n g .
■
Replace all panels before operating.
■
Remove doors from your old refriger a tor.
To reduce the ris k of fire, electric shock, or injur y when using your refrigerator, follo w these basic
follow instructions.
can be killed or seriously injured if you don't
You
follow instructions.
■
Use nonflammable cleaner.
■
Keep flammable mater ia ls and vapors, such as
gasoline, aw ay from refr iger ato r.
■
Use two or mo re peop le to mov e and install
refrigerator.
■
Disconnect power before installing ice maker.
■
Use a sturdy glass when dispensing ice or water (on
some models).
SAVE THESE INSTRUCTIONS
Proper Disposal of
Your Old Refrigerator
W ARNING
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or
brain damage.
IMPORTANT – Child entrapment and suffocation ar e not
problems of the past. Junked or abandoned refrigerators
are still d a ngerous – even if they will sit for “just a few
days.” If you are getting rid of your old refrig erator, please
follow these instructions to help prevent accidents.
Before you throw away your old refrigerator or freezer:
■ Take off the doors.
■ Leave the shelves in place so that children may not
easily climb inside.
3
PARTS AND FEATURES
This manual covers sev eral diff erent models. The refrigerator you have purchased may hav e some or all of the items listed.
The locations of the features may not match your model.
•
normal
•
3
1
•
5
off
coldest
Meat
1. Adjustable Freezer Shelf
2. Ice Cube Trays
3. Ice Bin (on some models)
4. Control Panel
5. Model and Serial Number Label
6. Meat Drawer
7. Crisper Cover
8. Crispers
9. Leveling Rol le rs (no t shown)
10. Freezer Door Shelves
Crisper
Crisper
11. Magnetic Door Gaskets
12. Light Switch
13. Utility Compartment
14. Adjustable Glass or Wire Shelves (number varies with
model)
15. Door Shelves
Other Parts and Features
(not shown in illustration above/optional on some
models)
Full-Width Crisper Drawer
Glass Crisper Cover
4
INSTALLING YOUR
Space Requirements
REFRIGERATOR
Unpacking Your Refrigerator
WARNING
Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
Removing P ackaging Materials
■ Remove tape and any labels from your refrigerator
before using (except the model and serial number
label).
To remove any remaining tape or glue, rub the ar ea
briskly with your thumb. Tape or glue residue can also
be easily removed by rubbing a small amount of liquid
dish soap over the adhesive with your fingers. Wipe
with warm water and dry.
■ Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove tape
or glue. These products can damage the surface of
your refrigerat or. For more information, see
“Refrigerator Safety” section.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion,
or fire.
■ To ensure proper ventilation for your refrigerator, allow
for a .5” (1.25 cm) space on each side
■ Allow 3” (7.5 cm) of space between overhead cabinets
and refrigerator top.
■ Allow at least 1” (2.5 cm) between back of cabinet and
the wall.
3" (7.5 cm)
■ On some models, shelves, bins, door shelf rails, and
other feature parts may be packaged in the Finishing
Touches™ FeaturePak. Follow the instructions
contained in the package for proper assembly.
IMPORTANT:
■ Depending on your model, do not remove any
permanent instruction labels inside your refrigerator, or
the Tech Sheet that is fastened behind the base grille.
■ Depending on your model, do not remove the white
Styrofoam insert that is located behind the control
panel on the ceiling o f the r efr igerat or. The insert is part
of the refrigerator and not part of the packing material.
If the insert is r emoved , ice may migr ate down from the
freezer and cause icicles to form.
2" (5.08 cm)
■ If your refrigerator has an ice maker, make sure you
leave some extra space at the back for the water lin e
connections.
■ If you are installin g your refr igerator n ext to a fixed wall,
leave 2” (5 cm) minimum on the hinge side (depending
on your model) to allow for the door to swing open.
■ Level the refrigerator (See “Door Closing and
Alignment”).
NOTE: Do not install the r efrig erator near an ove n, radiator,
or other heat source, nor in a location where the
temperature will fall below 40° F (5° C).
5
Electrical Requirements
TOOLS NEEDED:
Reversing the Door Swing
W ARNING
Electrical Shock Hazard
Plug into a grounded (earthed) outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical
connection:
Recommended Grounding Method
Plug 1: A 11 5 Volt, 60 Hz., AC on ly 15 or 2 0 a m pere fused,
grounded (earthed) electrical supply is required.
Plugs 2 and 3: A 220/240 Volt/50 Hz or 220 Volt/60Hz AC
only 10 ampere fused and grounded (e arthed) electrical
supply is required.
SUGGESTION: Reversing the door swing should be
performed by a qualified person.
IMPORTANT: Before you begin, turn the refrigerator OFF,
unplug it, and r emove any food from door shelves.
To remove doors from hinges:
1. Keep doors closed until ready to lift free from the
cabinet.
2. Start at the top hinge and work your way down to the
center hinge and bottom hinge. Remove all screws and
components as shown.
3. Open and lift doors off hinges.
NOTE: If you are reversing the door swing, you should
move the handles while the d oors are of f of the refri gerator.
Follow the instructions in the “Reversing the Door
Handles” section.
Plug 1
It is recommended that a separate circuit serving only your
refrigerator be provided. Use an outlet that cannot be
turned off by a switch. Do not use an extension cord.
NOTE: Before performing any t ype of installation, cleaning ,
or removing a light bulb, turn the control, (Thermostat,
Refrigerator or Fr eezer Contr ol dep ending on the mo del) t o
OFF and then disconnect the refrigerator from the
electrical source. When you are finished, reconnect the
refrigerator to the electrical source and reset the control
(Thermostat, Refrigerat or o r Fr e ezer Control depending on
the model) to the desired setting.
Plug 2
Plug 3
6
To replace doors on hinges:
1. Remove hole plugs covering the screw holes on the
opposite side of the refrigerat or using a flat putty knife.
2. Replace the doors.
3. Start at the bottom hinge and work your way up to the
center hinge and top hinge replacing all components
and screws as shown.
4. Line up doors so they are centered between the sides
of the cabinet and parallel with each other.
5. Fill all unused openings with screws or plastic hole
plugs. Moisture will enter an y unfilled openings.
NOTE: If the doors are not closing on their own, see
the “Door Closing and Alignment” section.
Top Hinge
Reversing the Door Handles
1. Cover
2. Hex-Head Hinge Screws
3. Top Hinge
4. Spacer
5. Sealing Screws
Center Hinge
Cone Screw (Use on Top and Bottom of
Handles)
Countersink Screw
Handle Screw (Use on Front of Handles)
To remove handles:
1. Remove freezer handle assembly as s hown. Keep all
parts together.
2. Remove refrigerator handle bottom screw. Pry off
screw cover and remove screw.
3. Remove refrigerat or handle ass emb ly as shown . Keep
all parts together.
To reinstall freezer handle:
1. Position freezer handle on the opposite side of the
freezer door and install top two screws.
2. Install the bottom two screws.
3. Tighten all screws.
1. Door Stop
2. Door Stop Screw
3. Center Hinge
4. Hex-Head Hinge Screws
5. Sealing Screws
Bottom Hinge
1. Door Stop
2. Door Stop Screw
3. Bottom Hinge
4. Hex-Head Hinge Screws
To reinstall r e frigerator handle:
1. Unscrew the hole plug in the refrigerator door and
screw it into place on the opposite side.
2. Position the refrigerator handle on the refrigerator door
and attach it at the top with two screws.
3. Align the lower portion of the handle and attach it to the
refrigerator with one screw.
4. Position screw cover over the screw and push it until it
snaps into place.
7
Door Closing and Alignment
Your refrigerator has two front adjustable rollers – one on
the right and one on the left. If your refrigerator seems
unsteady or you want the doors to close easier, adjust the
refrigerator's tilt using the instructions below:
1. Roll out the refrigerator and use a level to check the
floor at the back from side-to-side. If needed, use
shims to level the back of the refrigerator if it is uneven.
Roll the refri gera tor b ack int o pla ce wi th t he rear rollers
on top of any shim(s) used so that the rear of the
refrigerator is level.
2. With the rear already level and the refrigerator in place,
use the bottom leveling screws to level the refrigerator
from side-to-side. They are part of the front roller
assemblies, which are found at the base of the
refrigerator on either side.
NOTE: Having someone push against the top of the
refrigerator takes some weight off the leveling screws
and rollers. This makes it easier to adjust the screws.
Style 1
1. Plugs
2. Countersink Screws
3. Plug
4. Handle Screw
5. Screw Cover
6. Plug
Style 2
3. Depending on your model, to level your refrigerator you
may either turn the screw clockwise to raise that side of
the refrigerator or turn the screw counterclockwise to
lower that side. Place a level on top of the refrigerator
to check adjustments.
8
4. If the doors do not close on their own, you will need to
raise the front of the refrigerator so it is slightly higher
than the back. To do this, turn both leveling screws
clockwise ¹⁄₂ turn.
IMPORTANT: Be sure to turn both screws an equal
amount or the refrigerator will no longer be level sideto-side.
5. Open doors and check if they close automatically. If
not, repeat steps 3 and 4.
6. Using a level, check to see if the refrigerator is still level
side-to-side. Readjust if necessary.
Understanding Sounds
You May H ear
Your new refrigerator may make sounds that your old one
didn’t make. Because the sounds are new to you, you
might be concerned about them. Most of the new sounds
are normal. Hard surfaces, like the floor, walls, and
cabinets, can make the sounds seem louder than they
actually are. The following describes the kinds of sounds
and what may be making them.
■ If your product i s equipped with an ice maker, you will
hear a buzzing sound when the water valve opens to fill
the ice maker for each cycle.
■ The defrost timer will click when the automatic defrost
cycle begins and ends. Also, the Thermostat Control
(or Refrigerator Control depending on the model), will
click when cycling on and off.
USING YOUR
REFRIGERATOR
Ensuring Proper Air
Circulation
In order to ensur e prop er temperatur es, you need to permi t
air flow between the refrigerator and freezer sections. As
shown in the illustration, cool air enters through the bottom
of the freezer section and moves up . Most of the air then
flows through the freezer section vents and recirculates
under the freezer floor. The rest of the air enters the
refrigerator section through the top vent.
■ Rattling noises may come from the flow of refrigerant,
the water line, or items stored on top of the refrigerator.
■ Your refrigerator is designed to run mor e efficiently to
keep your food items at the desired temperatur e. The
high efficiency compressor may cause your new
refrigerator to run longer than your old one, and you
may hear a pulsating or high-pitched sound.
■ Water dripping on the defrost heater during a defrost
cycle may cause a sizzling sound.
■ You may hear the evaporator fan motor circulating the
air through the refrigerator and freezer compartments.
■ As each cycle ends, you may hear a gurgl ing sound
due to the ref r igerant flowing in your refrigerator.
■ Contraction and exp a nsion of the insid e walls may
cause a popping noise.
■ You may hear air being forced over the condenser by
the condenser fan.
■ You may hear water running into the drain pan duri ng
the defrost cycle.
Do not block any of these vents with food packages. If
the vents are blocked, airflow will be prevented and
temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer to
the other. You must thoroughly clean both sections to
eliminate odors. To pr e vent odor t ransf er a nd d ryi ng ou t o f
food, wrap or cover foods tightly. (See the “Food Storage
Guide” section for details.)
9
Setting the Control
For your convenience, the Temperature Control is
preset at the factory. The control for the refrigerator and
freezer is located in the top of the refrigerat or section. It
controls the temperature in both the refrigerator and
freezer compartments.
When you first install your refrigerator, make sure that
the Temperature Control is still preset. The
Temperature Contr ol should be at the “mid-sett ing” (3),
as shown in the illustration below.
3
1
0
5
NOTE: Turning the Temperature Control to OFF stops
cooling in both the refrigerator and freezer compartments,
but does not disconnect the refrigerator from the power
supply.
Give your refri gerator time to coo l down co mpletely befor e
adding food. It is best to wait 24 hours before you put food
into the refrigerator.
IMPORTANT: If you add food before t he refrigerator has
cooled completely, your food may spoil. Turning the
Temperature Control to a higher (colder) than
recommended setting will not cool the compartments
any faster.
Adjusting Control Settings
Give the refrigerator time to cool down completely before
adding food. It is best to wait 24 hours before you put food
into the refrigerator. The “mid-setting” (3) indicated in the
previous section should be correct for normal household
refrigerator u sage. The contr ol is set corre ctly when milk or
juice is as cold as you like and when ice cream is firm.
The Temperature Control functions as the thermostat for
the entire product (refrigerator and freezer sections). The
higher the number setting, the longer the compressor will
run to keep the temperature colder.
Use the settings listed in the chart below as a guide.
Always remember to wait at least 24 hours between
adjustments.
RECOMMENDED
CONDITION/REASON:
REFRIGERATOR section
too warm
■
Door opened often
■
Large amount of food added
■
Room temperature very warm
FREEZER section too warm/ice
not made fast enough
■
Door opened often
■
Large amount of food added
■
Very cold room temperature
ADJUSTMENT:
Turn
TEMPERATURE
Control to next
higher number,
wait 24 hours,
then re-check
Turn
TEMPERATURE
Control to next
higher number,
wait 24 hours,
then re-check
(can’t cycle often enough)
■
Heavy ice usage
■
Air diffuser blocked by items
Move items out of
airstream
REFRIGERATOR section
too cold
■
Control not set correctly f or
your conditions
Turn
TEMPERATURE
Control to next
lower number,
wait 24 hours,
then re-check
FREEZER section too cold
■
Control not set correctly f or
your conditions
Turn
TEMPERATURE
control to next
lower number,
wait 24 hours,
then re-check
F ood Storage Guide
Storing Fresh Food
Wrap or store food in the refrigerator in airtight and
moisture-proof material unless otherwise noted. This
prevents food odor and taste transfer throughout the
refrigerator. For dated products, check code date to
ensure freshness.
10
Butter or margarine
Keep opened butter in covered dish or closed
compartment. When storing an extra supply, wrap in
freezer packaging and freeze.
Cheese
Store in the original wrapping until you are ready to use
it. Once opened, rewrap tightly in plastic wrap or
aluminum foil.
Milk
Wipe milk cartons. For best storage, place milk on
interior shelf.
Eggs
Store in original carton on interior shelf.
Fruit
Wash, let dry, and store in r ef rig erator in plasti c bags or
crisper. Do not wash or hull berries until they are ready
to use. Sort and keep berries in original container in a
crisper, or store in a loosely closed paper bag on a
refrigerator shelf.
Leafy vegetables
Remove store wrapping and trim or tear off bruised and
discolored ar eas. Wash in cold water and drain. Place in
plastic bag or plastic conta i ne r an d sto re in crisp er.
Vegetables with skins (carrots, peppers)
Place in plastic bags or plastic container and store in
crisper.
Fish
Use fresh fish and shellfis h the same day as purchased.
Meat
Store most meat in original wrapping as long as it is
airtight and moisture-proof. Rewrap if necessary. See
the following chart fo r storage times. When storing meat
longer than the times given, freeze the meat.
Chicken ...........................................................1-2 days
Ground beef ....................................................1-2 days
V ariety meats (liver, heart, etc.)........................1-2 days
Cold cuts.........................................................3-5 days
Steaks/roasts ..................................................3-5 days
Cured meats..................................................7-10 days
Leftovers
Cover leftovers with plastic wrap or aluminum foil.
Plastic containers with tight lids can also be used.
Storing Frozen Food
NOTE: For further information a bout preparing food for
freezing or food storage times, check a freezer guide or
reliable cookbook.
Packaging
Successful freezing depends on the correct packaging.
When you close and seal the package you must not allow
air or moisture in or out. If you do, you could have food
odor and taste transfer throughout the refrigerator, and
also dry out frozen food.
Packaging recommendations:
■ Rigid plastic containers with tight-fitting lids
■ Straight-sided canning/freezing jars
■ Heavy-duty aluminum foil
■ Plastic-coated paper
■ Non-permeable plastic wraps (made from saran
film)
■ Specified freezer self-sealing plastic bags
Follow package or container instructions for proper
freezing methods.
Do not use:
■ Bread wrappers
■ Non-polyethylene plastic containers
■ Containers without tight lids
■ Wax paper or wax-coated freezer wrap
■ Thin, semi-permeable wrap
Freezing
Your freezer will not quick-freeze any large quantity of
food. Put no more unfrozen food into the freezer than will
freeze within 24 hours (no more than 2 to 3 lbs of food per
cubic foot [907-1,350 g per liter] of freezer space). Leave
enough space in the freezer for air to circulate around
packages. Be careful to leave enough room at the front so
the door can close tightly.
Storage times will vary ac cor ding to t he qu ality and t ype of
food, the type of p ackaging or wrap used (air tight and
moisture-proof), and the storage temperature. Ice crystals
inside a sealed package are normal. This s imply means
that moisture in the food and air inside the package have
condensed, creating ice crystals.
NOTE: Allow hot foods to cool at room tempe ratu r e for 3 0
minutes, then package and freeze. Cooling hot foods
before freezing saves energy.
11
REFRIGERATOR
FEATURES
Refrigerator Shelves
The shelves in your refrigerator are adjustable to match
your individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier. It will also
reduce the amount of time the refrigerator door is open,
and save energy.
To remove a shelf:
1. Remove items from the shelf.
2. Slide shelf straight out to the stop
3. Depending on your model, lift back or front of shelf to
pass stop.
4. Slide shelf out the rest of the way .
Drop-in Door Trim
The door trim may be removed for easier cleaning.
To remove the trim:
1. Remove all items from the shelf.
2. Pull straight up on each end of the trim.
To replace the trim:
1. Locate each end of the trim piece above the trim
pocket opening.
2. Push the trim straight down until it stops.
Removing the Meat Drawer
and Cover
To replace a shelf:
1. Slide back of shelf into shelf track in wall of cabinet.
2. Guide front of shelf into shelf track.
3. Slide shelf in all the way.
(on some models)
To remove the meat drawer:
1.
Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
Style 1
To remove the cover:
1. Remove meat drawer.
2. Push cover back to release rear clips from shelf.
3. Tilt cover up at front.
4. Pull cover forward and out.
To replace the cover:
1. Fit notches and cl ips on underside of c over over rear
and center cross bars on shelf.
2. Lower cover into place.
3. Pull cover forward to secrue rear clips onto shelf.
12
Loading...
+ 27 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.