Whirlpool 279811 Installation Guide

(4)- (110 SOURCE) DRYER MOTOR KIT #279811.

INSTALLATION AND WIRING INSTRUCTIONS

for Pluggable Motor Replacement

This Kit Contains:

1 Motor Asurnb_

2 1/8" FemaleTermlnals (insulated)

motor in this kit may or may not be Identical to your old motor. If your ¢urrent motor has the pluggsble motor
switch, replace the service motor In the came manner as you removed your defecUve motor. If your defecUve motor
has the switch where the wire lead from the main harness connects to the motor switch Indlviduaity, carefully

J OTE TO THE INSTALLER: This motor Idt is an authorized FSP service replecement part for your application. The

follow Instructions below. -r •

Potential Fire Hazard and/or

NulsanceTdpplng of Motor Protector

DO NOT under any clrcumstenca attempt to removeor
replace the motor switch fromthis pluggalde service

motor.The switch Ise non-serviceable component.
Failure to do so could result In tire, serious Inlury or

deab'L

1. Remove defective motor using standard motor removal

prooadures.

2. Compare end note the difference between the motor

switch of the defective motor and the switch of the new
replacement motor. If the switches are the same, slml_y

install the motor in reverse order you've removed the
defective motor. See Figure 1.

NOTE: Overload protector is pert of the switch on

the replacement motor and separate on the

defective motov.

DEFECTMEMOTOR

OLD

MOTOR

RGURE!

o__ IrmtructlonS;_eet279812 Ray,A 1/g6