Whirlpool 20RB-D4L A, 20RU-D4L A, 20RI-D4L A DESCRIPTION OF THE APPLIANCE

DESCRIPTION OF THE APPLIANCE

REFRIGERATOR COMPARTMENT
A. Inside light (depending on the model)
B. Intermediate light (depending on the model)
C. Adjustable shelf
D. Shelf - drawer lid
E. Crisper
F. Crisper adjustment
G. Meat drawer
H. Meat drawer adjustment
I. Dairy products compartment
J. Door trays
K. 2-litre door tray with bottle holder
L. 0.75 litre door tray
M. Water filter (depending on model)
N. “Multiflow” (depending on model)
O. Bottle rack (if available)
P. Fresh food compartment (if available)

FREEZER COMPARTMENT
Q. Automatic ice-maker
R. Glass shelves / Racks

(depending on the model)

S. Drawer / Bottom basket

(depending on the model)

T. Drawer / Top basket

(depending on the model)

U. Ice cube drawer
V. Freezer door trays
Z. Inside light

8









 


















FIRST USE

Connect the appliance to the water system and power supply (refer to the Installation manual).
When connecting the appliance to the power supply, the display will show the temperatures preset by the
manufacturer.
If the temperature indicator appears, accompanied by the acoustic alarm (which means that the long
black-out alarm has been activated), press the alarm reset button.
Note: After switching the appliance on, it will be necessary to wait for 2 to 3 hours before a temperature
suitable for a standard appliance load is reached.

GUIDE TO SELECTING FUNCTIONS

Stand-by

This function turns off the refrigerator and freezer compartments. To activate the standby function, press
the button for 3 seconds: both displays will go off and a dash will appear on the left display. To reset the
function, carry out the same procedure until the previously set temperatures are displayed.

Note: Remember that this operation does not disconnect the appliance from the power supply.

Freezer temperature

The factory-set ideal temperature is -18°C. To change the temperature, press the buttons until the
display shows the required value.

Refrigerator temperature

The factory-set ideal temperature is +5°C.
To change the temperature, press the buttons until reaching the required value that it will be
displayed.

On/off

Use the on/off button to switch the ice maker on or off. When the ice maker is on, the display shows one
of the two icons.

Mode
Press the mode button to select the type of ice desired: crushed or cubes .

USING THE APPLIANCE

9