Whelen RBKTHD4L User Manual

ENGINEERING COMPANY INC.

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: [phone]

Fax: [phone]

Use existing bolts

®

TIR 3™ Super LED® Lighthead Bracket Model RBKTHD4

Under Radio Box, Harley-Davidson® w/State Police Package

Internet: www.whelen.com
Sales e-mail: [e-mail]
Canadian Sales e-mail: [e-mail]
Customer Service e-mail: [e-mail]

Installation Guide:

Fig. 1

Installation:

This bracket will install under the radio box using the bolts
that hold the radio box to the rear deck.

1. Remove the radio box and place the bracket onto the radio
box bolts (Figs 1 & 2).

2. Remount radio box, securing the lighthead bracket.

3. Mount the lighthead to the bracket using the supplied
flange and metal screws (Fig. 3).

4. Extend the lighthead wires to your power source and refer
to the lighthead manual for instructions.

Automotive: Lightheads

©2004 Whelen Engineering Company
Inc. Form No.13933C (030409)

ENGINEERING COMPANY INC.

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: [phone]

Fax: [phone]

Fig. 2

IMPORTANT! It is the responsibility of the installation
technician to make sure that the installation and operation
of this product will not interfere with or compromise the
operation or efficiency of any vehicle equipment!

IMPORTANT! Before returning the vehicle to active service,
visually confirm the proper operation of this product, as
well as all vehicle components/equipment.

For warranty information regarding this product, visit www.whelen.com/warranty

®

TIR 3™ Super LED® Lighthead Bracket Model RBKTHD4

Under Radio Box, Harley-Davidson® w/State Police Package

Internet: www.whelen.com
Sales e-mail: [e-mail]
Canadian Sales e-mail: [e-mail]
Customer Service e-mail: [e-mail]

Installation Guide:

Fig. 1

Installation:

This bracket will install under the radio box using the bolts
that hold the radio box to the rear deck.

1. Remove the radio box and place the bracket onto the radio
box bolts (Figs 1 & 2).

2. Remount radio box, securing the lighthead bracket.

3. Mount the lighthead to the bracket using the supplied
flange and metal screws (Fig. 3).

4. Extend the lighthead wires to your power source and refer
to the lighthead manual for instructions.

Automotive: Lightheads

©2004 Whelen Engineering Company
Inc. Form No.13933C (030409)

Use existing bolts

For warranty information regarding this product, visit www.whelen.com/warranty

Fig. 2

IMPORTANT! It is the responsibility of the installation
technician to make sure that the installation and operation
of this product will not interfere with or compromise the
operation or efficiency of any vehicle equipment!

IMPORTANT! Before returning the vehicle to active service,
visually confirm the proper operation of this product, as
well as all vehicle components/equipment.

Page 1

Fig. 3

#6 Phillips Pan Head
Metal Screw (QTY 2)

Flange

Bracket

r

a

B

h

s

a

r

C

Lighthead

Rear Deck

Crash Bar

Radio Box

Fig. 3

#6 Phillips Pan Head
Metal Screw (QTY 2)

Flange

eck

racket

B

r

a

B

h

s

a

r

C

Lighthead

ear D

R

Crash Bar

Radio Box

Page 2