Whelen RBKT6 User Manual

®

www. .com

ENGINEERING COMPANY INC.

Route 145, Winthrop Road,
Chester, Connecticut 06412
Phone: [phone]
Fax: [phone]
Sales Email:[e-mail]
Canadian Sales:[e-mail]
Customer Service:[e-mail]

LINZ6 License Plate Mounting Bracket

IMPORTANT! It is the responsibility of the installation technician

to make sure that the installation and operation of this product will
not interfere with or compromise the operation or efficiency of
any vehicle equipment!

Mounting

1. Remove the hardware securing the license plate to the
vehicle.

2. Position the lighthead mounting bracket onto the license
plate mounting location so that the brackets mounting holes
are aligned with theupper license plate mounting holes.

Vertical lighthead orientation

3. Place the license plate onto the mounting bracket so that the
upper mounting holes in the license plate are aligned with
both the bracket mounting holes and the upper license plate
mounting holes.

4. Secure the license plate and the lighthead mounting bracket
to the vehicle usingthe original hardware.

Refer to the instructions included with your lighthead for wiring,
fusing and pattern information.

Horizontal lighthead orientation

©2009 Whelen Engineering Company Inc.
Form No. 14287 (041709)

For warranty information regarding this product, visit www.whelen.com/warranty