®
ENGINEERING COMPANY INC.
51 Winthrop Road
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Pole Mounted Knuckle Assembly
Pioneer™ (Single & Dual)
Installation Guide:
Fax: (860) 526-4078
Internet: www.whelen.com
Sales e-mail: autosale@whelen.com
Canadian Sales e-mail: canadiansales@whelen.com
Customer Service e-mail: custserv@whelen.com
The following will illustrate the assembly of the Pioneer™ knuckle mount. It will also provide the
basic wiring required for both the single and dual Pioneer™. Please refer to your Pole Mount Guide
for final mounting procedures.
WIRING: Pioneer Single / No Switch WIRING: Pioneer Single / 1 Switch
Pioneer
Wires
Input
Cable
Wires
(2-conductor/
16 AWG Min.)
BLK (BLK/WHT)BLK
WHTRED*
*Fuse @ 10A *Fuse @ 10A
Input
Cable
Wires
(2-conductor/
16 AWG Min.)
BLK (BLK/WHT)BLK
Pioneer™ Floodlight
1
2
3
4
5
WHTRED*
Pioneer
Wires
WIRING: Pioneer Dual / No Switch
BLK (BLK/WHT)GRN
Input
Cable
Wires
(4-conductor/
16 AWG Min.)
WIRING: Pioneer Dual / 1 Switch
GRN
BLK
Input
RED*
Cable
WHT
Wires
(4-conductor/
16 AWG Min.)
WIRING: Pioneer Dual / 2 Switches
BLK (BLK/WHT)BLK
*Fuse @ 10A
BLK (BLK/WHT)
BLK (BLK/WHT)
*Fuse @ 20A
WHTRED*
WHTWHT*
WHT
WHT
Pioneer
Wires
Pioneer
Wires
67 8 17
91011
12 1413
1591317
Bracket 1/4-20x3/4 Screw O-Ring Switch Plug
2 6 10 14
10-24x3/8 Screw Adj. Knob Nylon Washer 10-24x3/8 Screw Cable Clamp
371115
Handle Nylon Washer 10-24x1/2 Screw Gasket
Gasket Adj. Knuckle Switch Plate Switch Box
4 8 12 16
Automotive: Lightheads
For warranty information regarding this product, visit www.whelen.com/warranty
©2011 Whelen Engineering Company Inc.
Form No.14537 (100311)
16 18
15
Page 1
Note that if the input cable is
going to be routed through the
adjustment knuckle (8), the plug
provided (17) will be removed
and the cable clamp provided (18)
must be used in its place.
18
not
GRN
BLK
Input
RED*
Cable
WHT*
Wires
(4-conductor/
16 AWG Min.)
*Fuse @ 10A
BLK (BLK/WHT)
BLK (BLK/WHT)
WHT
WHT
Pioneer
Wires