THE CITY OF
NEW YORK
DEPARTMENT OF BUILDINGS
U
L
®
Weatherproof Appliances - Series AH Audibles, AS Audible Strobes, MT Multitone Strobes,
RSS Strobes and ET70 Speaker Strobes and Weatherproof Mounting Accessories
Description:
Designed for life safety, performance and reliability, Cooper
Wheelock’s cost effective weatherpoof notification appliances
include:
Weatherproof Appliances Series
Strobes RSSWP
Horn Strobes ASWP
Horns AH-24WP, AH-12WP
Multitone Horn Strobes MTWP
Multitone Horns MT
Speaker Strobes ET70WP
Speakers ET-1010
All strobe models are UL dual listed - meeting both UL1638
and UL1971 requirements. As dual listed appliances, these
weatherproof strobes, horn strobes and speaker strobes are listed
for outdoor applications under UL 1638 as well as under UL 1971,
the Standard for Safety Signaling Devices for Hearing Impaired.
With an extended temperature range of –31°F to 150°F (-40°C
to 66°C), Wheelock weatherproof appliances meet or exceed UL
outdoor test requirements for rain, humidity and corrosion resistance
while providing multiple strobe intensity options, including the
highest strobe ratings available for area coverage per NFPA 72
strobe spacing tables (up to 185 candela for wall mounting and 177
candela for ceiling mounting).
To enable weatherproof mounting, Cooper-Wheelock provides the
industry’s widest choice of mounting options for surface or unique
semi-flush installation. Models are available for surface mounting
to Wheelock weatherproof backboxes on walls or ceilings. The
optional WP-KIT allows the weatherproof backboxes (IOB, WPBB or
WPSBB) to be mounted to a recessed electrical box for concealed
conduit installation. For semi-flush installation, the WPA and
WFPA kits allow a customer to mount the weatherproof appliances
to a recessed electrical box without the need for an external
weatherproof backbox. See the Backboxes, Plates and Gaskets
Table on page three of this document for a summarization of these
mounting options and the required accessories.
When used in conjunction with Wheelock PS-24-8MC Power
Supplies or SM/DSM Sync Modules, the Wheelock weatherproof
appliances can be synchronized to meet NFPA 72 synchronization
requirements. The horn output of horn strobes can be independently
controlled on 2-wire circuits using the Wheelock patented sync
protocol. MTWP horn strobe models are 4-wire appliances; the
strobes can be synchronized while the audible can be connected
to a coded fire alarm system or can be set to produce any of eight
selectable tones.
Features:
• Approvals include: UL Standards 1971, 1638, 464 and 1480
California State Fire Marshal (CSFM) and New York City
(MEA), Factory Mutual (FM) and Chicago (BFP) . See
agency approvals by model number on page two of this
document
• Compliance with the following requirements: NFPA, UFC,
ANSI 117.1, OSHA Part 29, 1910.165, ADA
• Weatherproof with extended temperature range of –40°F to
150°F (-40°C to 66°C)*
• Dual Listed strobe models (UL 1638 and UL 1971)
• Industry’s highest strobe candela options
• Synchronization capability using Series SM, DSM Synch
Modules (MTWP and MT-12/24 audible is non-sync)
• Models with field selectable tone, dBA and candela settings
• Wall or ceiling mounting options
• Surface of semi-flush mounting
• IN/OUT wiring termination accepting two #12-18 AWG wires
at each terminal
*The series RSSWP, ASWP, MTWP and ET70WP have UL approval down to -40°F.
The AH-24WP, MT-12/24 and the ET-1010 have been ULC tested and approved to
-40°F, but not submitted to UL. The AH-12WP has UL/ULC approval to -31°F.
E5946
S5391
S2652
151-92-E
7125-0785:131 (ASWP)
7125-0785:146 (ET70WP)
7125-0785:156 (MTWP)
7300-0785:154 (RSSWP)
NOTE: All CAUTIONS and WARNINGS are identified by the symbol . All warnings are printed in bold capital letters.
WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR
APPLYING THIS PRODUCT. VISIT WWW.COOPERWHEELOCK.COM OR CONTACT COOPER WHEELOCK FOR THE CURRENT INSTALLATION INSTRUCTIONS.
FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR
OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU
AND/OR OTHERS.
General Notes:
• Strobes are designed to flash at 1 flash per second minimum over their UL Listed Regulated Voltage Range.
• All candela ratings represent minimum effective Strobe intensity based on UL Standards 1971 and 1638 as indicated in candela ratings table.
Wall Mount
RSSWP
ASWP
Strobe Order Code
RSSWP-2475W-FR Red 9013
RSSWP-2475W-FW White 3034
RSSWP-24MCWH-FR Red 5161
RSSWP-24MCWH-FW White 5165
Audible Strobe
ASWP-2475W-FR Red 9012
ASWP-24MCHW-FR Red 5137
ASWP-24MCWH-FW White 5140
Multi-tone Strobe
MTWP-2475W-FR Red 8420
MTWP-2475W-FW White 3112
MTWP-24MCWH-FR Red 5132
MTWP-24MCWH-FW White 5134
Speaker Strobe
ET70WP-2475W-FR Red 9077
ET70WP-2475W-FW White 3179
ET70WP-24185W-FR Red 4885
ET70WP-24185W-FW White 4891
MTWP
ET70WP
Ceiling Mount
RSSWP
ASWP
Strobe Order Code
RSSWP-2475C-FR Red 4338
RSSWP-2475C-FW White 4446
RSSWP-24MCCH-FR Red 5167
RSSWP-24MCCH-FW White 5187
Audible Strobe
ASWP-2475C-FR Red 4251
ASWP-2475C-FW White 4502
ASWP-24MCCH-FR Red 5149
ASWP-24MCCH-FW White 5157
Multi-tone Strobe
MTWP-2475C-FR Red 4457
MTWP-2475C-FW White 4478
MTWP-24MCCH-FR Red 5102
MTWP-24MCCH-FW White 5122
Speaker Strobe
ET70WP-2475C-FR Red 4452
ET70WP-2475C-FW White 4454
ET70WP-24177C-FR Red 4845
MTWP
ET70WP
ET70WP-24177C-FW White 4859
Candela Ratings
Series
UL 1971
@ 32º-
120ºF
UL 1638
@ 77°F
UL 1638
@ -40°F
RSS, ET70WP and
MTWP UL Max Current
(Strobe Only)
ASWP
High Med Low
2475 30 180 115 0.138 0.168 0.155 0.150
MCWH
MCCH
135 135 65 0.300 0.355 0.340 0.335
185 185 90 0.420 0.480 0.465 0.460
115 115 50 0.300 0.355 0.340 0.335
177 177 75 0.420 0.480 0.465 0.460
24185 185 185 90 0.420
24177 177 177 75 0.420
UL Max. Current
(Audible)
MTWP/MT
24 VDC
MT
12 VDC
dBA HI STD HI STD
Horn 0.108 0.044 0.177 0.034
Bell 0.053 0.024 0.095 0.020
March Time 0.104 0.038 0.142 0.034
Code 3 Horn 0.091 0.035 0.142 0.034
Code 3 Tone 0.075 0.035 0.105 0.021
Slow Whoop 0.098 0.037 0.142 0.035
Siren 0.104 0.036 0.152 0.030
Hi/Lo 0.057 0.025 0.114 0.026
Wall or Ceiling Mount
MT
ET-1010
Audible Order Code
AH-24WP-R Red 7416
AH-12WP-R Red 7415
Horn
MT-12/24-R Red 5023
Speaker
ET-1010-R Red 3135
ET-1010-W White 3137
UL Max. Current
High (99) dBA 0.080 0.192
Med (95) dBA 0.043 0.108
Low (90) dBA 0.021 0.058
UL Reverberant dBA @ 10 Feet
Watts 1/8 1/4 1/2 1 2 4 8
ET-1010 77 80 83 86 87 92 94
ET70WP 78 81 84 87 90 93 95
Model Number Agency Approvals
Strobe UL MEA CSFM FM BFP
RSSWP-2475 X X X X *
RSSWP-24MCWH X * * * *
RSSWP-24MCCH X * * * *
Audible Strobe
ASWP-2475 X X X X X
ASWP-MCWH X * * * *
ASWP-MCCH X * * * *
Multitone Strobe
MTWP-2475 X X X X *
MTWP-MCWH X * * * *
MTWP-MCCH X * * * *
Horns/Audibles
AH-24WP X X X - X
AH-12WP X X X - X
MT-12/24 X X X X X
Speaker Strobe
ET70WP-2475 X X X * *
ET70WP-185 X * * * *
ET70WP-177 X * * * *
*Pending
AH
AH
24 VDC 12 VDC
FACP
NAC #1
NAC #2
Sync
Module
or
PS-12/24-8
Power
Supply
Strobe
Circuit
Audible
Circuit
MTWP
DSM
+ OUT 2�
+OUT 1�
+ IN 1�
+ IN 2�
MINUS 1�
MINUS 2�
+
-
-
+
SYNC�
AUDIBLE�
STROBE�
NAC�
CIRCUIT�
OUT�
STROBE�
NAC�
CIRCUIT�
RETURN�
FACP
RSSWP�
RSS�
RSS�
RSS�
ASWP�
ASWP�
TO NEXT
APPLIANCE
OR EOLR
FROM
PRECEDING
APPLIANCE
OR FACP
+
-
STROBE AUDIBLE
+
-
RED
BLACK
+
- -
+
+
-
+
-
+
-
FROM
PRECEDING
APPLIANCE OR
FACP
TO NEXT
APPLIANCE
OR EOLR
Mounting Accessories
Gasket Kit Order Code
WP-KIT 4486
Flush Plates
WFPA-R Red 4698
WFPA-W White 4701
WFP-R Red 4696
WFP-W White 4697
Backboxes
IOB-R Red 5046
IOB-W White 5047
WPSBB-R Red 9751
WPSBB-W White 3033
WPBB-R Red 9014
WPBB-W White 4692
WBB-R Red 2959
WBB-W White 2960
Wiring Diagrams
WFP
WFPA
IOB
Mounting Options:
RSSWP Strobes WPSBB WPSBB + WP-KIT WFP
ET70WP Speaker Strobes IOB IOB + WP-KIT WFP
ASWP Horn Strobes WPBB WPBB + WP-KIT WFPA
AHWP Horns WBB - WFP
ET-1010 Speakers WBB - WFP
MTWP Multitone Horn Strobes IOB IOB + WP-KIT WFP
Multitone Horn IOB IOB + WP-KIT WFP
WPSBB
WPBB
Backboxes, Plates, Gasket Kits
Surface Mount
Exposed Conduit Concealed Conduit
WBB
Flush
Mount
SERIES MTWP APPLIANCES SYNCHRONIZED STROBE
OPERATION WITH CODED FACP
Note: Models are available in Red or White. Contact Customer Service for Order Code and Delivery.
#Refer to Data Sheet S7000 for Mounting Options
NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance
with Wheelock Inc. standard terms and conditions.
SERIES MTWP AUDIBLE APPLIANCE AND STROBE OPERATE
IN UNISON. RED AND BLACK SHUNT-WIRES ARE SUPPLIED.
SERIES RSSWP, ASWP, AHWP, MTWP AND MT-12/24
APPLIANCES
Note: Strobe circuit requires constant voltage.
SERIES RSSWP/ASWP APPLIANCES SYNCHRONIZED W/
DSM MODULE SINGLE CLASS “A” NAC CIRCUIT
ARCHITECTS AND ENGINEERS SPECIFICATIONS
General
Weatherproof notification appliances shall be UL listed for outdoor use. Weatherproof Strobe appliances shall be listed under UL Standard
1638 (Standard for Visual Signaling Appliances) for Indoor/Outdoor use and UL Standard 1971 (Standard for Safety Signaling Devices
for Hearing Impaired). The appliances shall be available for optional wall mounting or ceiling mounting to weatherproof backboxes using
either exposed conduit or concealed conduit, or semi-flush mounting to a recessed electrical box in walls or ceilings using Wheelock
mounting accessories.
Weatherproof Strobes
Weatherproof Strobe appliances shall produce a minimum flash rate of 60 flashes per minute over the UL Regulated Voltage Range
of 16 to 33 VDC and shall incorporate a Xenon flashtube. The weatherproof strobes shall be available with UL 1971 candela ratings
up to 185 cd for wall mounting and 177 cd for ceiling mounting. UL 1638 candela ratings up to 180 cd at 77°F shall be available. The
strobes shall operate over an extended temperature range of –40°F to 150°F (-40°C to 66°C) and be listed for maximum humidity of
95% RH. Strobe inputs shall be polarized for compatibility with standard reverse polarity supervision of circuit wiring by a Fire Alarm
Control Panel (FACP).
Weatherproof Audibles and Audible/Strobe Combinations Weatherproof horns and multitone audibles shall be listed for Indoor/Outdoor
use under UL Standard 464. The horns shall be able to produce a continuous output or a temporal code-3 output that can be synchronized.
T
Multitone audibles shall be able to produce 8 distinct tones selectable by dip switch and shall have at least 2 sound level settings. Multitone
Audible/Strobe combinations shall have independent inputs for the audible and strobe. The strobes shall be able to be synchronized.
The audibles shall be able to be coded when operated on a separate NAC.
Weatherproof Speakers and Speaker/Strobes
Weatherproof speakers and speaker/strobes shall be listed for Indoor/Outdoor use under UL Standard 1480. All speakers shall provide
field selectable taps for 1/8W to 8W operation for either 25 VRMS or 70 VRMS audio systems and shall incorporate a sealed back
construction for extra protection and improved audibility. Speakers without strobes shall be Wheelock Series ET-1010. They shall be
listed to produce up to 94 dBA and shall incorporate a vandal resistant grille design. Speaker with strobes shall be Wheelock Series
ET70WP. They shall be available for surface or semi-flush mounting to walls or ceilings and shall be listed to produce up to 93 dBA.
Synchronization Modules
When synchronization of strobes or temporal code-3 audibles is required, the appliances shall be compatible with the Wheelock Series
SM and DSM Sync Modules or the Wheelock PS-24-8MC Power Supply with built-in, patented sync protocol. The strobes and audibles
shall not drift out of synchronization at any time during operation.
Series ASWP audibles and strobes shall be able to be synchronized on a 2-wire circuit with the ability to silence the audible if required.
The strobes on Series MT multitone audible/strobe appliances shall be able to be synchronized and shall be able to be operated on a
separate circuit from the audibles while the audible circuit is connected to a coded or continuous NAC.
Weatherproof Mounting Accessories
Weatherproof mounting options shall include surface mounting or semi-flush mounting to walls or ceilings. Surface mounted appliances
shall mount to Wheelock IOB, WBB, WPBB or WPSBB weatherproof backboxes using either exposed conduit or concealed conduit.
For concealed conduit the weatherproof backbox shall be mounted to a recessed electrical box with Wheelock’s WP-KIT to provide a
weatherproof seal for the electrical box. Semi-flush mounted appliances shall mount to a recessed electrical box using Wheelock WFP
or WFPA flush plates to provide a weatherproof seal between the electrical box and the appliance.
273 Branchport Avenue
Long Branch, NJ 07740
Phone: (800) 631-2148
Fax: (732) 222-2588
www.cooperwheelock.com
WE ENCOURAGE AND SUPPORT NICET CERTIFICATION
3 YEAR WARRANTY
Made in USA
S9004 WP 03/07
Loading...