Wharfedale Pro CoMAX 12, CoMAX 12B Operating Manual And User Manual
CoMAX 12/12B
OPERATING MANUAL AND USER GUIDE
CoMAX 12/12B
TABLE OF CONTENTS
Page
1……………………………………….Important Warnings and Safety
Instructions
2……………………………………….Features
3……………………………………….Introduction
3…………………………………..…..CoMAX
12 Overview
4………………………………………Why the CoMAX
12 Loudspeakers?
6………………………………………Setting up/ Speaker Placement
7………………………………………Connections/Wiring
8..……………………………………..Specifications & Dimensions
10……………………………………..Warranty
CoMAX 12/12B
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1. READ ALL INSTRUCTIONS carefully and become familiar with the features and
functions of these products before operating them.
2. RETAIN THESE INSTRUCTIONS for future reference.
3. COMPLY WITH ALL WARNINGS –
All warnings and instructions for this product should be adhered to.
4. USE WITH AMPLIFIERS – In order to avoid damage to drivers and other equipment,
it is advisable to establish and follow a routine for powering up and powering down a
sound system. With all system components connected, turn on source equipment
(mixers, signal processors, record and playback units, etc.) BEFORE powering up
amplifiers. Transient voltages from powering up source equipment can damage speakers
if amplifiers are already turned on. Make sure that amplifier volumes are set to their
minimum settings and power up any system amplifiers LAST. It is recommended that all
system components be allowed to stabilize for several seconds before any source
signals are introduced or level setting adjustments are made. Similarly, when shutting
systems down, turn all amplifiers off first, before powering down any other system
components.
5. CABLES – Do not use shielded or microphone cables for connection between
amplifiers and speakers. Use only approved speaker cables with proper connectors.
6. RIGGING – SUSPENDING – MOUNTING – Rigging, suspending and mounting of
these speaker systems can expose members of the public to serious health risks and
even death. UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR
OTHERWISE MOUNT THESE SPEAKERS UNLESS YOU ARE FULLY QUALIFIED
AND CERTIFIED TO DO SO BY RELEVANT LOCAL, STATE AND NATIONAL
AUTHORITIES. ALL RELEVANT SAFETY REGULATIONS MUST BE FOLLOWED. IF
YOU ARE NOT PROPERLY QUALIFIED OR DO NOT KNOW OF PERTINENT
REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR ADVICE.
7. CAUTION – These professional loudspeaker systems are capable of generating very
high sound pressure levels. Use care with placement and operation to avoid exposure to
excessive volume levels. Permanent hearing damage can result when operated to
extreme levels.
8. SERVICE – There are no user serviceable parts inside this product. Users should not
attempt to service this product. Warranty nullification could result if this is attempted.
1
CoMAX 12/12B
FEATURES – CoMAX 12
2-way Co-axial loudspeaker system
2” (50.8mm) Titanium HF compression driver
Low distortion, high power, 12" (305mm) woofer
350 Watts Continuous Power Handling
High strength Polypropylene cabinet
High strength stand socket for use with CoMAX
12B
DTF dynamic filament driver protection
Eight (8) M10 hanging points
Two NL4 Connectors and two 1/4” speaker inputs
FEATURES – CoMAX
12B Subwoofer
Low distortion, high power, 12" (305mm) woofer
450 Watts Continuous Power Handling
High strength Polypropylene cabinet
High strength stand socket for use with CoMAX
12 and
optional steel stand pole
Eight (8) M10 hanging points can be fitted with casters
2 Parallel NL4 Connectors plus two 1/4” speaker inputs
Parallel NL4/1/4” outputs for passive system using
CoMAX
12
2
Loading...