Weston Vertical Sausage Stuffers User Manual

If any components of this unit are broken, do not operate properly, or for product returns,

Phone: [phone] (Outside the U.S. 440-638-3131)

Mail: 20365 Progress Drive, Strongsville, Ohio 44149

E-Mail: [e-mail]

All Trademarks and Registered Trademarks are property of the respective companies.

ATTENTION!

please contact Weston Products LLC

Web Site: WestonProducts.com

VERTICAL

SAUSAGE STUFFER

SAVE THESE INSTRUCTIONS!

Refer to them often and use them to instruct others.

7 LB (3 L) MODEL NO. 86-0701-W

11 LB (5 L) MODEL NO. 86-1101-W

REV102811

9

WESTON WARRANTY INFORMATION

SAVE THIS WARRANTY INFORMATION FOR YOUR RECORDS!

Weston Products LLC warrants to the ORIGINAL RETAIL PURCHASER of this product that if operated in

1

5

11

40 mm 20 mm

30 mm 13 mm

10

3

12

4

15

14

16

2

13

accordance with the printed instruction accompanying it, then for a period of 1 year from the date of purchase,
the product shall be free from defects in material and workmanship.
The Warranty Card, along with a copy of the original receipt, must be received by Weston Products LLC

within 30 days from purchase date for the warranty to apply. Failure to send the completely lled out Warranty

Card, along with a copy of the original receipt, will void the warranty.
The product must be delivered to or shipped freight prepaid to Weston Products LLC for warranty services,
in either its original packaging or similar packaging affording an equal degree of protection. Damage due to
shipping is not the responsibility of the company. Weston Products LLC charges a $35.00 per hour bench
charge. NOTE: No repairs will be started without the authorization of the customer. The return shipping cost
to the customer will be added to the repair invoice.
Weston Products LLC will repair (or at its discretion, replace) the product free of charge, if in the judgment
of the company, it has been proven to be defective as to seller’s labor and material, within the warranty period.
New or rebuilt replacements for factory defective parts will be supplied for one (1) year from the date of
purchase. Replacement parts are warranted for the remainder of the original warranty period.
For non-warranty repairs, contact Weston Products LLC’s Customer Service at 1-800-814-4895 M-F
8am-5pm EST (outside of the United States 440-638-3131) to obtain a Return Merchandise Authorization
Number (RMA Number). Weston Products LLC will refuse all returns that do not contain this number. DO

NOT RETURN THE UNIT WITHOUT PROPER AUTHORIZATION FROM WESTON PRODUCTS LLC.

LIMITATIONS: The warranty is void if the product is used for any purpose other than that for which it is
designed. The product must not have been previously altered, repaired, or serviced by anyone else other
than Weston Products LLC. If applicable, the serial number must not have been altered or removed. The
product must not have been subjected to accident in transit or while in the customer’s possession, misused,
abused, or operated contrary to the instructions contained in the instruction manual. This includes failure
caused by neglect of reasonable and necessary maintenance, improper line voltage and acts of nature. This
warranty is not transferable and applies only to U.S. and Canadian sales.
Except to the extent prohibited by applicable law, no other warranties whether expressed or implied,

including warranty merchantability and tness for a particular purpose, shall apply to this product. Under no

circumstances shall Weston Products LLC be liable for consequential damages sustained in connection with
said product and Weston Products LLC neither assumes nor authorizes any representative or other person to
assume for it any obligation or liability other than such as is expressly set forth herein. Any applicable implied
warranties are also limited to the one (1) year period of the limited warranty.

This warranty covers only the product and its specic parts, not the food or other products processed in it.

CUT ALONG THE DOTTED LINE AND SEND THE WARRANTY CARD ALONG WITH A COPY OF YOUR ORIGINAL
PURCHASE RECEIPT TO:

Weston Products LLC - WARRANTY DEPARTMENT

20365 Progress Drive, Strongsville, OH 44149

8

6

Stuffer

Sides

7

Stuffer

Base

WESTON WARRANTY CARD

SEND THIS CARD ALONG WITH A COPY OF YOUR ORIGINAL PURCHASE RECEIPT TO:

WESTON PRODUCTS LLC-WARRANTY DEPT. , 20365 PROGRESS DRIVE, STRONGSVILLE, OH 44149

Customer Name: _________________________________

Address: _______________________________________

City/State/Zip: ___________________________________

Telephone Number: (_________) ____________________

E-Mail Address: _________________________________

Original Date of Purchase: ______/________/________

17

ASSEMBLED

VERTICAL

STUFFER

-2- -11-

Product Model #: _________________________________

Serial # (if applicable): ______________________

SAUSAGE INFORMATION

MEAT SELECTION FOR SAUSAGE MAKING

Sausage making has evolved over many years and generations, and as a result there are countless types
of sausage you can make using the basic ingredients of meat, fat and a few carefully blended spices.
Following are a few simple guidelines that will help you make the best tasting sausage possible.

Any type of meat can be used for making sausage: pork, beef, bison, moose and caribou, even antelope
make great sausage. It is important when preparing venison or other red game meats to trim all the fat

from the meat, as red game tallow will turn rancid in as few as ve days. Replace the fat with either pork

or beef fat, depending on the type of product you are making, at a ratio of 1 pound (0.5 kg) of fat for every
4 pounds (1.8 kg) of game meat.

The fat content of your sausage will affect the taste, texture, cooking characteristics and shelf life of your
product. Most commercially made sausage has a fat content of about 20%. Using less than 12% fat will

result in a very dry tasting sausage, while using more than 20% may result in a sticky avorless sausage
that will be difcult to cook.

CURING

It is important to properly cure meats to preserve meat and poultry, and to destroy undesirable
microorganisms on the meat surfaces that cause spoilage and food born illnesses. There are many steps
that help in this process, including smoking, cooking, drying, chilling and the addition of cure ingredients.
The oldest means of accomplishing this is by introducing salt into the meat. The resistance of bacteria
to salt varies widely among different types of bacteria. The growth of some bacteria is inhibited by salt
concentrations as low as 3%, e.g., Salmonella, whereas other types are able to survive in much higher salt
concentrations, e.g., Staphylococcus. Fortunately, the growth of many undesirable organisms normally
found in cured meat and poultry products is inhibited at low concentrations of salt.

Modern curing is based on Nitrates and is very scientic. The best way to ensure proper curing is to

purchase one of the many commercially available curing agents from either a grocery store or your local
butcher. A very common cure is Prague Powder, which is available in two types (#1 and #2).

CASING

There are many different types of casings available, the right choice depends on personal preference as
well as the type of sausage you wish to make. For most sausages, your choices are natural or collagen.
Don’t let the names fool you; collagen casings are not a synthetic product . They are made from beef skin
and other tissues. Collagen casings are uniform in size and texture and require almost no preparation.
“Natural” casings are the intestines of lamb, sheep, hogs or beef. They are less uniform in size and require
substantial preparation. For those reasons, more than 75% of commercially made sausage in the U.S. is

made with collagen casing. There are also brous non-edible casings that are used for some varieties of

smoked sausages and bolognas.

TYPES OF SAUSAGE

Most sausages fall into one of four categories: Fresh, Smoked, Cooked or Dried. All sausages, except
dried, require refrigerated storage. There is also a sub-category of uncooked smoked sausages.

Among the fresh and uncooked smoked sausages, you will nd such avors as kielbasa or Polish sausage,

Italian sausage, breakfast sausage and many others. Both fresh and uncooked smoked sausages require
cooking before eating and also require refrigerated storage.

Smoked and cooked sausages include salami, bologna, the ever-popular hot dogs and many others.
Proper smoking requires a smokehouse or smoker. These can be simple home-built structures made
from metal drums or even old refrigerators or they can be elaborate manufactured units. Most smoked
sausages are warmed before serving. Many people think that a smoked sausage will last much longer
without spoilage, but this is not true. Smoked sausages should be treated the same as fresh sausage in
terms of storage.

Dried sausages require the longest processing time, as they are air dried over a long period of time. Some
types of dry sausages are pepperoni, prosciutto and a variety of ham products, just to name a few. The
conditions under which the meat is dried are very exacting; temperature, time and humidity must all be
carefully monitored for a safe and delicious product.

STORAGE

It is important to remember that sausage will lose its avor the longer that it is stored. It is recommended

that you only make as much sausage as you will need for 4-6 weeks. Even frozen sausage will begin to

lose avor noticeably after 6 weeks. Frozen sausage should be thawed slowly in the refrigerator before

cooking or serving. Quick thawing of the product will degrade the taste as well.

-10-

COMPONENT LIST

DIAGRAM PART PART
NUMBER DESCRIPTION NUMBER

1 Handle 86-0710
2 Plunger 86-1126
3 Plunger Seal 86-0716
4 Pressure Release Valve (4 Piece Set) 86-0715
5 Stainless Steel Funnel Set (4 Funnels) 86-0720
6 Stainless Steel Canister 7 lb 86-0712 11 lb 86-1112
7 Front Ring Nut 86-0721
8 Canister Mounting Hardware Kit (4 Sets) 86-0722
9 Plunger Shaft 7 lb 86-0711 11 lb 86-1111
10 Plunger Bolt 86-1125
11 Gear Housing Cover with Hardware Kit 86-1113
12 Gear Housing Cover Bottom Plate

with Hardware Kit 86-1114
13 Gear Housing with Hardware Kit 86-1117
14 Main Driving Gear 86-1119
15 Slow Speed Control Gear 86-1120
16 Fast Speed Control Gear 86-1121
17 Rubber Foot (4 Piece Set) 86-0717

If any components of this unit are broken or the unit does not operate

Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131

properly, call Weston Products LLC Toll Free at

Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131

1-800-814-4895

E-Mail: [e-mail]

ACCESSORIES Sold Separately

Food-Grade Silicone Spray 03-0101-W
Hog Ring Pliers 47-1401
Hog Rings (500 count) 47-1452

These products and many more products can be ordered by visit ing

WestonProducts.com or by calling

Weston Products LLC Toll Free at 1-800- 814-489 5

E-Mail: [e-mail]

-3-

GENERAL SAFETY RULES

READ AND FULLY UNDERSTAND ALL INSTRUCTIONS
AND WARNINGS PRIOR TO USING THIS UNIT. YOUR
SAFETY IS MOST IMPORTANT! FAILURE TO COMPLY
WITH PROCEDURES AND SAFE GUARDS MAY

WARNING!

1. CHECK FOR DAMAGED PARTS.
Before using the Stuffer, check that all
parts are operating properly and perform
the intended functions. Check for binding
of moving parts, mounting and any other
conditions that may affect the operation.

2. KEEP CHILDREN AWAY. NEVER
LEAVE THE APPLIANCE UNATTENDED.
The Dehydrator is NOT A TOY.

3. The Manufacturer declines any
responsibility in the case of improper use of
the Stuffer. Improper use of the Stuffer will
VOID the warranty.

4. NEVER store or leave the Stuffer at a
temperature lower than 32oF (0oC).

5. Repair must be done by an authorized
dealer. Use only factory original parts and
accessories. Modication of the Stuffer will
VOID the warranty.

RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE.

REMEMBER: YOUR PERSONAL SAFETY IS YOUR
RESPONSIBILITY!

6. Be sure the Stuffer is stable during
use. All four feet should be secure on a level
surface. The Stuffer should not move during
operation.

7. NEVER operate the Stuffer with the
Gear Housing Cover open or removed.

8. WEAR EYE PROTECTION! Everyday
eye glasses are not safety glasses.
Safety glasses conform to ANSI Z87.1
requirements. Note: Approved safety
glasses have Z87 printed or stamped on
them.

9. DO NOT use while under inuence of

drugs or alcohol.

10. Household use only.

FOOD SAFETY

CAUTION! It is important to follow the “Food Safety” guidelines outlined in this
manual. For the most up to date instruction visit the USDA website.

There are basic rules to follow when handling food.

They are COOK, SEPARATE, CLEAN, and CHILL.

COOK

It’s crucial to cook food to a safe internal temperature to destroy bacteria that is present. The
safety of hamburgers and other foods made with ground meat has been receiving a lot of attention
lately, and with good reason. When meat is ground, the bacteria present on the surface is mixed
throughout the ground mixture. If this ground meat is not cooked to at least 160oF to 165oF (71oC to
74oC), bacteria will not be destroyed and there’s a good chance you will get sick.

Solid pieces of meat like steaks and chops don’t have dangerous bacteria like E. coli on the inside,
so they can be served more rare. Still, any beef cut should be cooked to an internal temperature
of at least 145oF (63oC) (medium rare). The safe temperature for poultry is 180oF (82oC) and solid
cuts of pork should be cooked to 160oF (71oC). Eggs should be thoroughly cooked too. If you are
making a meringue or other recipe that uses uncooked eggs, buy specially pasteurized eggs or use
prepared meringue powder.

SEPARATE

Foods that will be eaten uncooked and foods that will be cooked before eating MUST ALWAYS be
separated. Cross-contamination occurs when raw meats or eggs come in contact with foods that
will be eaten uncooked. This is a major source of food poisoning. Always double-wrap raw meats
and place them on the lowest shelf in the refrigerator so there is no way juices can drip onto fresh
produce. Then use the raw meats within 1-2 days of purchase, or freeze for longer storage. Defrost
frozen meats in the refrigerator, not on the counter.

When grilling or cooking raw meats or sh, make sure to place the cooked meat on a clean platter.

Don’t use the same platter you used to carry the food out to the grill. Wash the utensils used in
grilling after the food is turned for the last time on the grill, as well as spatulas and spoons used for
stir-frying or turning meat as it cooks.

SAVE THESE INSTRUCTIONS!

Refer to them often and use them to instruct others.

GEAR MOVEMENT

Fast Gear Shaft

With the Handle attached, turn
clockwise to raise the Plunger,

counter-clockwise

to lower the Plunger.

Slow Gear Shaft

With the Handle attached, turn

counter-clockwise to

raise the Plunger,

clockwise to lower the Plunger.

-4- -9-

Make sure to wash your hands after handling raw meats or raw eggs. Washing hands with soap
and water, or using a pre-moistened antibacterial towelette is absolutely necessary after you have
touched raw meat or raw eggs. Not washing hands and surfaces while cooking is a major cause of
cross-contamination.

CLEAN

Wash your hands and work surfaces frequently when you are cooking. Washing with soap and
warm water for at least 15 seconds, then dry with a paper towel.

CHILL

Chilling food is very important. The danger zone where bacteria multiply is between 40oF and
140oF (4oC and 6oC). Your refrigerator should be set to 40oF (4oC) or below; your freezer should
be 0oF (-17oC) or below. Simple rule: serve hot foods hot, cold foods cold. Use chang dishes
or hot plates to keep food hot while serving. Use ice water baths to keep cold foods cold. Never
let any food sit at room temperature for more than 2 hours - 1 hour if the ambient temperature
is 90oF (32oC) or above. When packing for a picnic, make sure the foods are already chilled
when they go into the insulated hamper. The hamper won’t chill food - it just keeps food cold
when properly packed with ice. Hot cooked foods should be placed in shallow containers and
immediately refrigerated so they cool rapidly. Make sure to cover foods after they are cool.

NOTE: Special considerations must be made when using venison or other wild game,

since it can become heavily contaminated during eld dressing. Venison is often held

at temperatures that could potentially allow bacteria to grow, such as when it is being
transported. Refer to the USDA Meat and Poultry Department for further questions or
information on meat and food safety.

6. Slip a casing on the end of the Stufng Funnel
until the entire casing has slid onto the Funnel

(gure 9).

7. Tie, twist or hog ring the end of the casing to
seal it.

8. Turn the Handle to extrude the mixture into the
casing. For best results, apply pressure around the
casing, close to the end of the Stufng Funnel.
This will hold the casing tight and will cause the

mixture to pack rmly into the casing.

9. When the end of the casing has been reached,
tie, twist or hog ring the end of the casing to seal
the contents inside.

STUFFING TIPS: The following are
suggestions to help reduce the resistance when
stufng with the 13 mm Stufng Funnel.

A. Add water to the meat mixture- up to 1-1/2
cups (0.4 L) of water per every 5 lb (2.3 kg) of
seasoned meat.

B. Add 1/4 cup (60 ml) of vegetable or olive
oil per every 5 lb (2.3 kg) of seasoned meat for

better ow.

RECIPES

ASSEMBLY

PLUNGER ASSEMBLY

1. Slide the Plunger Seal onto the
Plunger (gure 1).

2. Assemble the Pressure Release
Valve Kit onto the Plunger. From the

top of the Plunger, place the Washer
onto the Valve Hole, then insert the

Screw through the Washer and into the
Valve Hole. From the underside of the
Plunger, place the Spring onto the end

of the Screw, then place the Valve Cap
onto the end of the Screw and twist to
secure.

3. Screw the Plunger Bolt onto the

Plunger Shaft (gure 2).

4. Place the assembled Plunger onto
the end of the Plunger Shaft (gure 3).

STUFFER ASSEMBLY

5. Attach the Handle by sliding it onto
either the Fast or the Slow Gear (gure 4).

6. Crank the Handle to bring the
Plunger to the top of the Stuffer.

Continued Next Page

Plunger

Shaft

Plunger

Seal

Plunger

Valve Hole

Pressure

Release

Valve Kit

Screw

Washer

Spring

Valve Cap

Fast Gear

Shaft

Plunger

Shaft

Plunger

Bolt

VENISON SAUSAGE

6 lbs venison 6 lbs lean pork 1/2 tsp sage
1/2 tsp cayenne pepper 2 tsp salt 1/2 cup honey
2 tsp pepper sausage casings

FRESH ITALIAN SAUSAGE- MILD/HOT

5 tsp salt 1 tsp sugar 2 tsp caraway seeds
3 tsp crushed hot peppers 1 tsp cracked fennel seed (omit if making mild)
2 tsp coarse ground black pepper 1 tsp coriander
1 pint cold water 10 lb boneless pork butt

**NOTE: If grinding meat for sausage, grind the meat through the coarse grinding

plate, add seasonings, then re-grind through a ne grinding plate.

Plunger

Slow Gear

Shaft

Handle

-5--8-

7. Rest the Canister’s Bottom Brackets
onto the Canister Mounts inside the
Housing of the Stuffer. Pivot the bottom
of the Canister into the Stuffer Housing.
Pivot the Canister fully into the Stuffer
Housing, snapping the Top Brackets
into the Canister Mounts (gure 5).

8. Insert the Stufng Funnel of choice
through the Front Ring Nut. Screw the
Front Ring Nut and Stufng Funnel onto
the mouth of the Canister until snug. DO
NOT OVERTIGHTEN the Front Ring Nut,
as it may damage the Funnel (gure 6).

9. Thoroughly coat the inside of the
Canister with a food-grade lubricant prior

to use (gure 7).

Outside view of

Canister Mounts

Top Brackets

Bottom Brackets

DISASSEMBLY & CLEANING

1. Remove the Stufng Funnel by unscrewing the Front Ring Nut, and pulling the
Funnel out.

2. Turn the Handle until the Plunger comes up and out of the Canister.

3. Pivot the Canister outward, then pull the Canister up to remove the Canister
from the Stuffer Housing.

4. Unscrew the Plunger from the Plunger Shaft. Disassemble the Pressure-
Release Valve from the Plunger. Remove the Plunger Seal from the Plunger.

5. Wash all parts that have come in contact with meat in hot soapy water. BE SURE
TO CLEAN THE PARTS IMMEDIATELY AFTER USE. Rinse and thoroughly dry all
parts immediately. Sterilize as needed.

6. Fully lubricate the Shaft, Canister, Pressure-Release Valve components and
the Front Ring Nut with a food-grade lubricant before and after each use.

STUFFING INSTRUCTIONS

CAUTION!! When the Plunger is pulled out of the Canister, RELEASE THE HANDLE

SLOWLY! Pressure or gravity could cause the Handle to spin back slightly and cause

!

injury.

NOTE: Apply a food-grade lubricant to the inside
of the Canister before lling with the meat mixture.

1. Tilt out the Canister.

2. Fill the Canister with the meat and seasoning

mixture (gure 8).

3. Press the mixture down into the Canister rmly
to release any trapped air.

Mouth of the

Front

Ring Nut

-6- -7-

Canister

Funnel

4. Pivot the Canister back into the upright position
and snap the Top Brackets onto the Canister
Mounts.

5. Turn the Handle until the Plunger comes in
contact with the meat and the mixture is ready to
extrude out the end of the Stufng Funnel.

Continued Next Page

Canister