Westinghouse WRR614XA, WRH9081, WRH6051, WRH6081, REHR6 User Manual

REHR6* WRH605I* WRH608I* WRR614*A WRH908I*
Retractable Rangehood User manual
2
WELCOME
Thank you for purchasing this appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
LEGEND
The symbols you will see in this booklet have these meanings:
WARNING!
This symbol indicates information concerning your personal safety
CAUTION! This symbol indicates information on how to avoid damaging the rangehood
IMPORTANT! This symbol indicates tips and information about use of the rangehood
CONTENTS
3 Important safety instructions 4 Installation 6 Operation and maintenance 7 Warranty
ENVIRONMENT!
This symbol indicates tips and information about economical and ecological use of the rangehood
CONDITIONS OF USE
This appliance is intended to be used in household and similar applications such as:
• Staff kitchen areas in shops, offices and other
working environments
• Farm houses
• By clients in hotels, motels and other residential
type environments
• Bed and breakfast type environments.
• Catering and similar non-retail applications
RECORD MODEL AND SERIAL NUMBER HERE:
Model:
Serial No:
SAFETY INSTRUCTIONS
Please read the user manual carefully and store in a handy place for later reference. Pass the user manual on to possible new owners of the appliance.
Read the following carefully to avoid damage or injury.
Note: You must read these warnings carefully before installing or using the accessory. If you need assistance, contact your Customer Care Department. The manufacturer will not accept liability, should these instructions or any other safety instructions incorporated in this book be ignored.
ENVIRONMENT!
Remove and discard any packaging material before using this accessory. Most of the packaging materials are recyclable. Please dispose of those materials through your local recycling depot or by placing them in the appropriate collection containers.
3
CAUTION
• Accessible parts may become hot when used with cooking appliance.
• Regulations concerning the discharge of air have to be fulfilled.
• Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
Cleaning
• Wipe the rangehood body and flue with a sponge or soft cloth soaked in warm soapy water, and dry with a soft cloth, for stainless steel models apply a stainless steel protector. Do not use oven cleaners or other abrasive materials.
• There is a fire risk if cleaning is not carried out in accordance with the instructions.
WARNING!
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Ensure the rangehood is switched off before carrying out maintenance, to avoid any possibility of electric shock.
• Grease filters must be removed every four weeks (maximum) for cleaning to reduce the risk of fire.
• Do not light a flame under the rangehood.
• This rangehood is not recommended for barbecues.
• The exhaust air from the rangehood must not be discharged into any heating flue, which may carry combustion products from other sources.
• Exhaust air must not be discharged into a wall cavity, unless the cavity is designed for the purpose.
• There must be adequate ventilation of the room when the rangehood is used at the same time as appliances burning gas or other fuels.
• Always cover lit gas burners with pots or pans when the rangehood is in use.
• Always switch off gas burners before you remove pots or pans.
Electrical Connection
• Check that the mains voltage matches with the voltage on the data plate inside the rangehood.
• Check that the installation complies with standards of local gas and electricity authorities.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
Accessories
• Use 125mm round exhaust ducting for best performance.
• When using flexible duct always install duct with the wire helix pulled taut to minimise pressure loss.
• Try to keep exhaust duct short and straight.
• Keep bends in the exhaust duct to a minimum.
• Do not restrict exhaust duct.
• Reducing the size of the exhaust duct will reduce the airflow of the rangehood. Please read instructions carefully. Service calls resulting from incorrect installation will be charged for.
Exhaust air from the rangehood must not be discharged into any heating flue which may carry combustion products from other sources. In addition, exhaust air must not be discharged into a wall cavity, unless the cavity is designed for the purpose. Adequate ventilation of the room must be ensured when the rangehood is operating simultaneously with appliances burning gas or other fuels. Installation must comply in all respects with your gas and electrical authorities. This rangehood is an indoor domestic appliance, and has been manufactured and tested to comply with Australian and New Zealand Standard AS/NZS 60335.2.31
4
INSTALLATION
Standard ducting installation
It is recommended that the unit be positioned at a minimum of 600mm for an electric cooktop and 650mm for a gas cooktop, and no further from the cooktop than 800mm. Then unit becomes less effective as the distance from the cooking surface to the rangehood increase.
ELECTRIC
GAS
650
600
Ducting installation
When installing with ducting pipe the Duct spigot must be fitted to the ducting hole on top of the body of the rangehood.
Duct Spigot
Recirculating installation
(For Models: WRH608I* WRR614*A & WRH908I*)
When installed in recirculating mode the ducting hole cover must be fitted.
Ducting hole cover
Fixing point dimensions – 600mm
210
ø
598
470
121
175
2 0
158
280
Parts supplied with hood
1 × Duct Spigot
1 × Ducting hole cover (only for WRH608I*
WRR614*A and WRH908I*)
4 × M6 × 40 screws
4 × Ø6 washers
2 × Carbon filters (only for WRR614*A)
Fixing point dimensions – 900mm
Parts supplied with hood
• Aluminium tape or cable ties to secure flue pipe
• Custom drawer fascia (if required)
210
ø
121
770
900
175
20
158
280
• Ducting accessories
WARNING! Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
Loading...
+ 8 hidden pages