Westinghouse W4207 User Manual

www.westinghousedigital.com
USER’S MANUAL
MANUEL DE L’UTILISATEUR
W4207 HD Video Monitor
Moniteur HD
Westinghouse Digital Electronics Santa Fe Springs, CA
Contacting Westinghouse Digital
Log on to: www.westinghousedigital.com
Contact Westinghouse Customer Service at (866) 287-5555 or write us at
service@westinghousedigital.com
English
Owner’s Record
The model and serial numbers are located @ the back of the Monitor. Keep a record of the numbers in the spaces provided below. Ref to them whenever you call upon your Westinghouse Digital dealer regarding this product.
Model No.____________________________
Serial No.____________________________
CONTENTS
1. PRODUCT SAFETY
S
AFETY GUIDELINES ........................................................................2
P
RODUCT SAFETY INSTRUCTIONS .....................................................3
2. INSTALLATION
P
ACKAGE CONTENTS........................................................................4
F
RONT VIEW OF THE W4207 HD MONITOR........................................5
R
EAR VIEW OF THE W4207 HD MONITOR .........................................5
S
IDE VIEW OF THE W4207 HD MONITOR...........................................6
R
EMOTE CONTROL...........................................................................8
I
NSTALLATION ..................................................................................9
3.
OSD FUNCTION
OSD P PC A P G
4. APPENDIX
T C S
FUNCTION.............................................................................12
ICTURE .......................................................................................13
PARAMETERS...........................................................................14
UDIO...........................................................................................15
ICTURE-IN-PICTURE .....................................................................17
ENERAL SETTINGS.......................................................................17
ROUBLESHOOTING .......................................................................18
LEANING THE W4207 HD MONITOR ..............................................20
PECIFICATIONS ............................................................................20
English
ii
1
PRODUCT SAFETY
English
1
1
PRODUCT SAFETY
Safety Guidelines
WARNING: This device must be operated with the original power supply, part number FSP273-4F04.
CAUTION: The power supply outlet should be located near the W4207 HD Monitor and should be easily
accessible. Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below:
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The specific power cord for this W4207 HD Monitor is enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must meet IEC-60320 requirements and should look like Figure A1 below:
USA..................UL Switzerland ..... SEV
Canada.............CSA Britain ............. BASE/BS
Germany..........VDE Japan ............... Electric Appliance Control Act
Figure A1 Figure A2
English
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled. For W4207 HD Monitors that are placed on a desk or table, only SJT type cord sets may be used. For W4207 HD Monitors placed directly on the floor, type SVT or SJT cord sets may be used. The cord set must be selected according to the current rating for the monitor. Please consult the table below for the selection criteria for power cords used in the United States and Canada.
Cord Type Size of Conductors in Cord Maximum Current Rating of Unit
SJT 18 AWG
16 AWG 14 AWG
SVT 18 AWG
17 AWG
10 Amps 12 Amps 12 Amps 10 Amps 12 Amps
FCC Compliance Statement
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or video reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the W4207 HD Monitor and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the Westinghouse Service Center or an experienced technician for assistance.
FCC Warning To assure continued FCC compliance, the user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable used, use only a shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by Westinghouse Digital will void the user's authority to operate this device.
2
1
PRODUCT SAFETY
Product Safety Instructions
Follow and obey all warnings and instructions marked on the W4207 HD Monitor. For your safety, please read all the safety and operating instructions before you operate the W4207 HD Monitor. Keep this user’s manual for future reference.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to a void injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Other Notices
Avoid exposing the W4207 HD Monitor to direct sunlight or high temperatures.
Avoid exposing the monitor to moisture or high humidity
Do not attempt repairs yourself. Your warranty does not cover repairs or attempted
repairs by anyone not authorized by the manufacturer
If your W4207 HD Monitor will not be used for a long period of time, unplug it and remove the batteries from the remote control
Only use attachments/accessories specified by the manufacturer.
Avoid touching the screen. Skin oils are difficult to remove.
Never remove the rear cover. Your W4207 HD Monitor contains high-voltage parts.
You may be seriously injured if you touch them.
Always handle your LCD display with care when moving it.
If the monitor emits smoke, abnormal noise, or a strange odor, immediately turn it
off and contact the Westinghouse Service Center.
English
3
2
INSTALLATION
Package Contents
Your product package includes:
42” Westinghouse LCD W4207 HD Monitor
Remote Control (with batteries)
Power Cord
User’s Manual
Quick Connect Guide
Warranty Card
English
4
2
INSTALLATION
Front View of the W4207 HD Monitor
Use the buttons on the right side of the W4207 HD Monitor or the buttons on the remote control to display the On Screen Display (OSD) menu and adjust the options. The OSD controls are defined in “OSD Functions” on page 16.
English
Power Indicator
Speakers
Rear View of the W4207 HD Monitor
“IR” Receiver
5
Loading...
+ 16 hidden pages