Westinghouse W3213 HD User Manual
English
If you have any questions or concerns,
Please call our toll free number
1-866-287-5555
1
Contents
PRODUCT SAFETY INSTRUCTIONS ........................... ..4
Antenna Installation Safety ............................................. ..5
Safety Guidelines ............................................................ ..6
LCD TV Overview............................................................ ..7
Package Contents ....................................................... ..7
Front View of the LCD TV............................................ ..7
Rear View of the LCD TV ............................................ ..7
Side View of the LCD TV............................................. ..8
Control Key.................................................................. ..8
Input Connector ........................................................... ..9
Remote Control ........................................................... 10
Installation ....................................................................... 12
Function adjustment........................................................ 15
Viewing OSD Menu ..................................................... 15
Picture.......................................................................... 16
English
Audio Setting ............................................................... 18
Channels...................................................................... 19
Settings........................................................................ 22
Locks ........................................................................... 29
Guide ........................................................................... 32
Product Specification....................................................... 33
Troubleshooting............................................................... 34
2
English
Cleaning the LCD TV
• MAKE SURE THE LCD TV IS TURNED OFF
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass
cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild nonabrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on
the LCD TV screen or case. Some chemical cleaners have been reported to damage the screen
and/or LCD TV case. Westinghouse Digital will not be liable for damage resulting from the use of
any ammonia or alcohol-based cleaners.
Thank you for purchasing a Westinghouse LCD TV
www.westinghousedigital.com
3
PRODUCT SAFETY INSTRUCTIONS
Follow and obey all warnings and instructions marked on the LCD TV. For your safety,
please read all the safety and operating instructions before you operate the LCD TV. Keep
this user’s manual for future reference.
Overloading
Do not overload wall outlets, extension cords, or power strips. This can result in fire or
electronic shock.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them. Periodically inspect the cords and each end of the
cords for damage. The LCD TV shall be installed near a wall socket outlet and the plug on
power cord shall be readily accessible.
Ventilation
Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable
operation of the LCD TV and to protect it from overheating, these openings must not be
blocked or covered.
• Do not block the openings by placing the LCD TV on a bed, sofa, rug or other
similar surface.
• Do not place the LCD TV in a built-in installation such as a bookcase or rack unless
proper ventilation is provided and the manufacturer’s instruction have been adhered
to.
Other Notices
• Avoid exposing the LCD TV to direct sunlight or high temperatures.
• Avoid exposing the LCD TV to moisture or high humidity.
• Do not attempt repairs yourself. Your warranty does not cover repairs or attempted
repairs by anyone not authorized by Westinghouse Digital.
• If your LCD TV will not be used for a long period of time, unplug the LCD TV and
remove the batteries from the remote control.
Precautions
• Avoid touching the screen. Skin oils are difficult to remove.
• Never remove the rear cover. Your LCD TV contains high-voltage parts. You may
be seriously injured if you touch them.
• Avoid exposing your LCD TV to direct sunlight or another heat source. Orient your
LCD TV away from direct sunlight to reduce glare.
• Always handle your LCD display with care when moving it.
• Place your LCD TV in a well-ventilated area; don’t place the LCD TV in airtight
compartments. Do not place anything on your LCD TV that prevents heat
dissipation.
• Ensure that the area around the LCD TV is clean and free of moisture.
• Do not place heavy objects on the LCD TV, audio/video cables, or power cord.
• If the LCD TV emits smoke, abnormal noise, or a strange odor, immediately turn it
off and contact the Westinghouse Service Center.
• WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose
The LCD TV To Rain Or Moisture! The LCD TV shall not be exposed to dripping or
splashing and objects filled with liquids, such as vases, shall not be placed on the
TV.
English
4
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use the LCD TV near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not attempt to bypass the safety purpose of the polarized or grounding- type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. If the provided
plug does not fit into your wall outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at the ends of
the cord.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the LCD TV. When a cart is used, use caution when moving the cart to
avoid injury or damage
English
13) Unplug the LCD TV during lightning storms or when it is not being used for a long
period of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
LCD TV has been damaged in any way, such as the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the LCD TV, it has been
exposed to rain or moisture, it does not operate normally, or the TV has been
dropped.
Antenna Installation Safety
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable
system is grounded to prevent voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
Lightning
For added protection for the LCD TV during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the LCD TV due to lightning and power-line surges. Do not
disconnect the antenna or the power cord during a heavy storm – lightning may strike while you
are holding the cable cord, causing serious injury. Turn off your LCD TV and wait for the weather
to improve.
Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits.
5
Safety Guidelines
WARNING: This device must be operated with the original power supply.
CAUTION: The power supply outlet should be located near the LCD TV and should be easily accessible.
Always use the appropriate AC cord that is certified for your specific country. Some examples are listed
below:
USA.............UL Canada.............CSA
Japan .. ...... Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The specific power cord for this LCD TV is enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must
meet IEC-60320 requirements and should look like Figure A1as below:
English
For the United States and Canada
In the United States and Canada the male plug is a NEMA1-15 style , UL Listed, and CSA Labeled. For LCD
TVs that are placed on a desk or table, type SVT or SJT cord sets may be used. For LCD TVs placed directly
on the floor, only SJT type cord sets may be used. The cord set must be selected according to the current
rating for the LCD TV. Please consult the table below for the selection criteria for power cords used in the
United States and Canada.
Cord Type Size of Conductors in Cord Maximum Current Rating of Unit
SJT 18 AWG
16 AWG
14 AWG
SVT 18 AWG
17 AWG
FCC Compliance Statement
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may
cause harmful interference to radio communications if not installed and used in accordance with the
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the LCD TV and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the Westinghouse Service Center or an experienced radio/TV technician for assistance.
FCC Warning
To assure continued FCC compliance, the user must use the provided shielded video interface cable with
bonded ferrite cores. If a BNC cable used, use only a shielded BNC (5) cable. Also, any unauthorized
changes or modifications not expressly approved by Westinghouse Digital will void the user's authority to
operate this device.
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
6
LCD TV Overview
This User Manual covers models:W3213 HD
Package Contents
Your product package includes:
• Westinghouse W3213 HD LCD TV
• Remote Control (with batteries)
• Power Cord
• Quick Connect Guide
• User’s Manual
• Warranty Card
Front View of the LCD TV
English
Speakers
Rear View of the LCD TV
IR receiver
7
Side View of the LCD TV
Control keys
English
Spine Design
Input connector
Control Key
MENU
+ VOL -
+ CH -
INPUT
1. Menu Turn OSD Menu ON/OFF
2. Volume + / -
3. Channel + / -
4. Input source
5. Power Power ON/OFF
Increase/Decrease sound volume or adjust a highlighted
control while in the OSD Menu
Channel up/down when input is TV or highlight a control
while in the OSD Menu
Select Active Video Input or choose a selection while in
the OSD MENU
8
Input Connector
1. S-Video Input
Connect an external video device equipped with S-video output.
2. Video Input
Connect an external video device with composite video output.
3. Video & S-Video Audio Input (Right / Left)
Connect an external audio source to this jack (Audio (R/L). This
connection supports either S-Video or Video input.
4. SPDIF Output(optical)
Connect this output to an external stereo audio amplifier, receiver or
surround sound processor with SPDIF optical Input.
5. Audio Output (Right / Left)
Connect this output to an external stereo audio amplifier, receiver or
surround sound processor with R/L audio Inputs.
6. ANT. (RF-input)
Connect the LCD TV to an over-the-air antenna or cable service to
view NTSC or ATSC (HDTV) content.
7. SERVICE
Factory service port
8. VGA Audio IN
Connect to the Audio out (Green) from a computer.
9. VGA
Using a 15-pin VGA cable, connect to a computer or other device
with a VGA output.
10. YPbPr1 Input
Connect external video devices with component output to these
jacks.
11. YPbPr1 Audio Input (Left / Right)
Connect an external audio source to this jack.
12. YPbPr2 Input
Connect an external video device with component output to these
jacks.
13.YPbPr2 Audio Input (Left / Right)
Connect an external audio source to this jack.
14. HDMI-HDCP input
Connect to an external video device such as HD Digital
cable/satellite receiver, HD Set-Top-Box, Media Center PC, or DVD
player.
15. HDMI Audio Input (Left / Right)
Connect the audio input if a DVI-to-HDMI converter cable is used.
16. AC IN (Power)
Connect the power cord from AC IN to a power source.
English
9
Remote Control
1. POWER :
Switch TV power On/Off
2. SWAP :
Feature not available on this model
3. PIP :
Feature not available on this model
4. Mute :
Mute the sound
5. Sleep:
Set sleep time to turn TV off automatically.
6. CC:
Closed Caption On/Off.
7. Backlight:
Adjust the LCD Backlight level
8. Favorite :
Select, remove or add your favorite
channel. Press Favorite (A, B, C) key to
access favorite list.
Use arrow keys and enter key to select,
add or remove the channel from favorite
list. (See more detail on page 19)
9. Channel number keys :
Select specific channel.
10. Enter :
Execute a command or +100 when
entering a channel greater than 100.
11. Ch▲/▼ :
TV Channel Up/ Down selection.
12. Input :
Scroll input source TV, Video, S-Video,
YPbPr1, YPbPr2, VGA, and HDMI.
13. Aspect Ratio:
Select Video Display format “STANDARD”
or “FILL”.
14. Vol +/- :
Volume Up / Down adjustment.
15. Last CH:
Switch to previous channel.
16. Menu :
Displays the On Screen Display (OSD).
17. T / S / W / X :
OSD Menu control.
T / S: TV Channel Up/ Down adjustment.
W / X : Volume Up / Down adjustment.
18. Enter :
Execute a command.
19. INFO :
Display the source and channel information
English
10
20. Guide
Show program information of current
channel.
21. TV:
Select TV source input.
22. HDMI:
Select HDMI source input.
23. PC :
Select VGA source input.
24. YPbPr1:
Select YPbPr1 source input.
25. DVI:
Feature not Available on this model
26. S-video:
Select S-video source input.
27. AV:
Select Video source input.
28. YPbPr2:
Select YPbPr2 source input.
Note: Before setting up favorite channel, please
make sure channel list is saved in TV. If not,
perform channel scan to save a channel list in
TV.
English
11
Loading...