Westinghouse MT150 THIN User Manual
Installation and Assembly:
Universal Flat Wall Mount f or 37" - 47" Flat Panel Screens
Model: MT150 THIN
Features:
• Universal design for 37" to 47" flat panel screens
• Low-profile design keeps the screen close up against the wall
• Easy to install with hooking brackets
• Screen fasteners included for quick installation
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer care call 1-866-287-5555.
Max Load Capacity: 150 lb (68 kg)
ISSUED: 02-08-06 SHEET #: 202-9092-1
Note: Read entire instruction sheet before you start installation and assembly.
WARNING
• Do not begin to install your Westinghouse product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call customer care at 1-866-287-5555.
• This product should only be installed by a qualified professional.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.
• Never exceed the Maximum Load Capacity of 150 lb (68 kg).
• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an
"edge to edge" stud finder is highly recommended.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly , but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
Tools Needed for Assembly
• stud finder ("edge to edge" stud finder is recommended)
• phillips screwdriver
• drill
• 1/4" bit for concrete and cinder block wall
• 1/2" bit for metal stud wall
• 5/32" bit for metal or wood stud wall
• level
Accessories
• Metal Stud Fastener Kit (ACC 415)
Table of Contents
Parts List..............................................................................................................................................................................3
Installation to Single Wood Stud Wall...................................................................................................................................4
Installation to Double Wood Stud Wall..................................................................................................................................5
Installation to Solid Concrete or Cinder Block .......................................................................................................................6
Installing Adapter Brackets...................................................................................................................................................7
Installing Flat Panel Screen to Wall Plate.............................................................................................................................8
For customer care call 1-866-287-5555.
2 of 9
ISSUED: 02-08-06 SHEET #: 202-9092-1
Before you begin, make sure all parts show n are included with your product.
Parts List
Description Qty Part #
wall plat e 1 200-4797
AA
adapter brack et 2 200-0759
BB
#14 x 2. 5" wood screw 4 5S1-015-C03
CC
All igator® anchor 4 590-0097
DD
4 mm all en wrench 1 560-1145
EE
CC
DD
BB
M4 x 12 mm (4)
504-9013
Adapter Bracket Fasteners
M4 x 25 mm (4)
504-1015
AA
M5 x 12 mm (4)
520-1027
M5 x 25 mm (4)
520-9543
EE
M6 x 12 mm (4)
520-1 128
M6 x 25 mm (4)
520-1208
M6 x 20 mm (4)
520-9402
M6 x 30 mm (4)
510-9109
3 of 9
I.D. 6.5 mm (4)
540-1058
ISSUED: 02-08-06 SHEET #: 202-9092-1
multi-washer (4)
580-1036
Loading...