Installation & Assembly - Under Cabinet
Swivel Mount for LCD TVs
This product is intended for use with 10” to 15" LCD TVs
weighing up to 10 lb and VESA
mounting patterens
IMPORTANT! Read entire instruction sheet before you start assembly and installation.
Important, read before installation: In order to locate the mount completely under
the cabinet, the cabinet depth should be at least 1.5" more than the height of the TV.
This depth may be more depending on the width and shape of your TV. As an alternative means of mounting, the mount can still be fastened when it is extended 2" past the
front of the mounting surface which will add 2" of depth to your cabinet.
P ART LIST
®
75 and VESA® 100
Model:
Max Load 10 lb (4.5 kg)
MT10 FLIP
Part #
A 090-0238 1 LCD assembly
B 095-4101 1 adapter plate
C 520-2027 4 M4 x .7 x 10 mm phillips screw
D 520-2099 4 10-32 x 1.25” phillips screw
E 540-9443 4 .219 x .5 x .25 nylon spacer
F 520-2100 4 10-32 x 2” phillips screw
G 540-9465 4 .219 x .5 x .88 nylon spacer
H 560-1134 3 cord clip
I 540-9442 8 #10 SAE washer
J 590-1122 1 2’ helical wire wrap
K 520-2005 4 M5 x .8 x 1 0 m m phillips
L 540-9447 4 1/4 split washer
M 504-2013 4 M4 x 12 mm phillips screw
N 590-5003 4 .198 x .313 x .437 retaining spacer
O 504-2014 4 M4 x 20 mm phillips screw
Some parts may not appear exactly as illustrated.
QTY. DESCRIPTION
A
C
D
M
E
B
J
H
F
K
G
O
I
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
L
N
ISSUED: 04-16-04 SHEET #: 090-9101-11 of 5
Remove cord cover from LCD assembly (A).
Cord Cover
A
This product is designed to accommodate screens with VESA® compliant hole
pattern. For safe mounting, please make sure that mounting screws turn at least
three complete turns in the screen inserts.
FOR VESA 75 MOUNTING PATTERN: 1.)
Choose hole pattern indicated below. 2.) Attach
adapter bracket (B) to back of monitor using four
M4 x 10 mm screws (C) as indicated below. 3.) If
hole pattern is in a pocket, attach adapter
bracket (B) to back of monitor using four M4 x 20
mm screws (O) and four retaining spacers (N) as
indicated below.
For screens with a hole
pattern in a pocket,
spacers (N) go between
adapter bracket (B) and
screen.
B
Note: Screen may appear slightly
different than illustrated
FOR VESA 100 MOUNTING PATTERN: 1.) Choose
hole pattern indicated below. 2.) Attach adapter
bracket (B) to back of monitor using four M4 x 10
mm screws (C) as indicated below. Note: If you don't
get three complete turns in the screen inserts, use
four M4 x 12 mm screws (M) instead of four M4 x 10
mm screws (C).
B
ISSUED: 04-16-04 SHEET #: 090-9101-12 of 5
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
Locate the bracket in the slot so
that the top of the TV does not touch
the round cover or go above it when
the tilt is in the open position as
shown in figure 1. Place 1/4 split
washer (L) on M5 screw (K) before
#10 SAE washer (I) and fasten
adapter plate (B) to LCD assembly
(A) as shown in figure 2.
Round Cover
A
K
L
I
figure 1
B
Sample location: your
screen may mount in a
different location in the slot.
Carefully hold the closed mount with the TV against the
bottom of your cabinet. Make sure that there is enough
clearance between the back of the TV and the wall to
clear the back tab. Drill four 1/4” holes to match the
drawing to the right.
CAUTION
• We recommend taking the screen off the mount to
affix the bracket to the cabinet, to avoid any damages
to the screen.
Fasten LCD Assembly (A) to cabinet using four
10-32 x 1.25” screws (D) four #10 SAE washers (I) and four 1/4” spacers (E). Get all four
screws (D) started before tightening.
Back holes of
LCD assembly
Wall
A
Back T ab
figure 2
6.00"
1.25"
TOP VIEW
Note: If cabinet underside has lip, use four
7/8" spacers (G) and four 10-32 x 2" screws
(F) instead of screws (D) and spacers (E).
This lowers LCD Assembly (A) by 7/8" to
allow LCD Assembly (A) to open and close
without obstruction.
or
EG
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
I
F
D
ISSUED: 04-16-04 SHEET #: 090-9101-13 of 5
or
Reattach screen onto bracket using the same
position determined in step 4. Wind helical wrap (J)
around all cords from back of LCD TV , as shown.
Place cord clips (H) as needed, to better manage
cords, making sure that one clip is close enough to
the hinge area to prevent cord from bunching up.
Note: Make sure that cords come out right side
of LCD assembly (A).
J
H
Right Side
A
Place cord cover back onto LCD assembly (A), so
that it is even with the bends on the side of the
mount.
Note: Make sure all slack is pulled out with
mount fully open before replacing cord cover.
Cord Cover
ISSUED: 04-16-04 SHEET #: 090-9101-14 of 5
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
Limited Five-Year Warranty
Westinghouse Digital Electronics warrants to original end-users of this Westinghouse television mounting product (the
“Product”) that the Product will be free from defects in material and workmanship, under normal use, for a period of five (5)
years from the date of purchase by the original end-user , subject to the following terms and conditions:
REP AIR OR REPLACEMENT – For a period of five (5) years from the original date of purchase, Westinghouse Digital
Electronics will repair any defect in material or workmanship in the Product, or, at its option, replace a defective Product.
Replacement parts and products will be warranted for either the remainder of the original warranty period or ninety (90)
days from the date of delivery to the end-user , whichever occurs last.
OBT AINING WARRANTY SERVICE – To obtain warranty services, you must either personally deliver or ship the Product
to Westinghouse Digital Electronics, freight prepaid. Please call Westinghouse Digital Electronics at (866) 287-5555 to
obtain a Return Merchandise Authorization (“RMA”) and for other instructions regarding return and replacement or repair of
the Product. Westinghouse Digital Electronics will not accept Products delivered to it without an RMA.
EXCLUSIONS TO WARRANTY – This warranty does not cover damage caused by (a) service or repairs by anyone other
than personnel authorized by Westinghouse Digital Electronics, (b) the failure to utilize proper packing when returning the
product, (c) improper installation or the failure to follow Product instructions or warnings, or (d) misuse or accident, in
transit or otherwise.
PROOF OR ORIGINAL PURCHASE – A sales receipt, invoice, or other proof of purchase specifying the original date of
purchase within the five (5) year warranty period must be presented to obtain warranty service. This warranty extends to
the original purchaser and is not transferable.
EITHER REP AIR OR REPLACEMENT IS YOUR EXCLUSIVE REMEDY UNDER THIS WARRANTY. EXCEPT TO THE
EXTENT PROHIBITED BY LAW, WESTINGHOUSE DIGITAL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES CLAIMED TO ARISE FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT . ANY IMPLIED W ARRANTY OF MERCHANT ABILITY OR FITNESS FOR A P ARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION AND SCOPE T O THE TERMS OF THIS WARRANTY.
Some States do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives specific legal rights, and
you may also have other rights which vary from State to State.
Westinghouse Digital Electronics, LLC
16257 East Gale Ave.
City of Industry , California 91745
T el: (626) 333-9677.
ISSUED: 04-16-04 SHEET #: 090-9101-15 of 5
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
and Westinghouse are trademarks of Westinghouse Electric Corporation and are used under license.
Loading...