Westinghouse LTV-20v2 User Manual

IMPORTANT PRODUCT SAFETY
INSTRUCTIONS

Follow and obey all warnings and instructions marked on your product. For your safety, please
read all the safety and operating instructions before you operate this product. Keep this user’s
manual for future reference.

Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result

in fire or electronic shock.

Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them. Pay particular attention to cords near plugs, convenience receptacles,
and the point where they exit from the product.

Ventilation

Slots and openings on the cabinet are provided for ventilation purposes.
To ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered.

• Do not block the openings by placing the product on a bed, sofa, rug or other similar
surface.

• Do not place the product in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instruction have been adhered to.

Other Notices

Avoid exposing the LCD display to direct sunlight or high temperatures.
Avoid exposing the LCD display to moisture or high humidity.
Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairs by anyone
not authorized by manufacturer.
If your LCD Display will not be used for a long period of time, unplug and remove the batteries from the
remote control.

Precautions

Sit at least 20” away from your LCD display.
Avoid touching the screen. Skin oils are difficult to remove.
Never remove the rear cover. Your LCD display contains high-voltage parts. You may be
seriously injured if you touch them.

• Avoid exposing your LCD display to direct sunlight or another heat source. Orient your
LCD display away from direct sunlight to reduce glare.

• Always handle your LCD display with care when moving it.

• Place your LCD display in a well-ventilated area. Do not place anything on your LCD

display that prevents heat dissipation.

• Ensure that the area around the LCD display is clean and free of moisture.

• Do not place heavy objects on the LCD display, video cable, or power cord.

• If smoke, abnormal noise, or strange odor is present, immediately switch the LCD

display off and call your dealer or manufacturer. It is dangerous to continue using the
LCD display.

Table of Contents

IMPORTANT PRODUCT SAFETY INSTRUCTIONS ....................................................................2

ANTENNA INSTALLATION SAFETY .......................................................................................................3

CLEANING THE LCD DISPLAY.............................................................................................................3

SAFETY GUIDELINES ...........................................................................................................................4

FCC COMPLIANCE STATEMENT ...........................................................................................................4

INSTALLATION.................................................................................................................................5

1. INSERT REMOTE CONTROL BATTERIES.............................................................................................5

2. REAR COVERS.................................................................................................................................5

3. CONNECT ANTENNA, CABLE, VIDEO, S-VIDEO, AND/OR YPBPR CABLES .........................................6

4. CONNECT POWER CABLES................................................................................................................7

5. TURN POWER ON ............................................................................................................................7

6. PROGRAMMING CHANNELS..............................................................................................................8

CONTROLS & CONNECTIONS.......................................................................................................9

FRONT VIEW OF THE PRODUCT ............................................................................................................9

REAR VIEW OF THE PRODUCT ............................................................................................................10

REMOTE CONTROL ............................................................................................................................11

OSD FUNCTIONS.............................................................................................................................12

SOURCE INPUT: TV OR AV OR S-VIDEO ............................................................................................13

Main Picture Menu ......................................................................................................................13

Multi Screen Menu.......................................................................................................................13

OSD Menu ...................................................................................................................................15

TV Menu ......................................................................................................................................16

Audio Menu..................................................................................................................................16

Parental Control Menu ................................................................................................................17

Password Edit Menu ..........................................................................................................................17

TV Rating Menu.........................................................................................................................18

MOVIE Rating Menu.................................................................................................................18

SOURCE INPUT: COMPONENT .............................................................................................................19

Main Picture Menu ......................................................................................................................19

APPENDIX ........................................................................................................................................20

SPECIFICATIONS ................................................................................................................................20

TROUBLESHOOTING...........................................................................................................................21

No power .....................................................................................................................................21

Power is ON but no screen image.................................................................................................21

Wrong or abnormal colors ...........................................................................................................21

Snow appears on screen...............................................................................................................21

No sound......................................................................................................................................21

Remote control does not work ......................................................................................................21

Remote control code not found in “universal” remote..................................................................21

How do I mount the LCD TV on a wall.........................................................................................21

How do I find more help?.............................................................................................................21

Antenna Installation Safety

Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information with regard to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and power-line surges. Do not disconnect the
antenna or the power cord during a heavy storm – lightning may strike while you are holding the cable
cord, causing serious injury. Turn off your LCD display and wait for the weather to improve.

Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits. When installing an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits as contact with them may be fatal.

Cleaning the LCD Display

• MAKE SURE THE LCD DISPLAY IS TURNED OFF

• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE

To clean the screen:

1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a
clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1. Use a soft, dry cloth.

2. If still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer

Manufacturer does not recommend the use of any ammonia or alcohol-based cleaners on the LCD
display screen or case. Some chemical cleaners have been reported to damage the screen and/or
LCD display case. Manufacturer will not be liable for damage resulting from use of any ammonia or
alcohol-based cleaners.

Safety Guidelines

Warning: This device must be operated with the original power supply, part number: ADP-60CF A.
CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible.
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for

the individual country. Some examples are listed below:

USA.................UL Switzerland ..... SEV

Canada.............CSA Britain ............. BASE/BS

Germany..........VDE Japan ............... Electric Appliance Control Act

IMPORTANT NOTICE CONCERNING POWER CORD SELECTION

The power cord set for this unit has been enclosed and has been selected according to the country of destination
and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original
cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1 below):

Figure A1 Figure A2

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled.
For units that are mounted on a desk or table, type SVT or SJT cord sets may be used. For units that sit on the
floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for your
unit. Please consult the table below for the selection criteria for power cords used in the United States and
Canada.

Cord Type Size of Conductors in Cord Maximum Current Rating of Unit

SJT 18 AWG

16 AWG
14 AWG

SVT 18 AWG

17 AWG

10 Amps
12 Amps
12 Amps
10 Amps
12 Amps

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and may cause harmful interference to radio
communications if not installed and used in accordance with the instructions. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the provided shielded
video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded BNC (5)
cable. Also, any unauthorized changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.

Installation

Congratulations on your purchase of a Westinghouse 20” LCD TV display. Relax as you, your
friends and family will soon be enjoying movies, broadcasts, and/or popular games on this
wonderful direct-view liquid crystal display.

Package Contents

Your LCD TV package includes:

• LCD TV Display

• Remote Control (2 AAA batteries are included)

• Cables

o Power Cord
o Antenna Cable

• Literature

o Quick Install Instructions
o User’s Manual
o Warranty Card

Important

Save the original box and all packing material for future shipping needs.

1. Insert Remote Control Batteries

• Remove the battery cover.

• Insert the batteries, paying careful attention to match the corresponding (+) and (_)

markings on the battery compartment.

• Re-attach the battery cover.

CAUTION

• Only use the specified AAA batteries.

• Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk

or lead to personal injury.

• Insert batteries according to (+) and (_) markings. Inserting the batteries incorrectly may result in
cracking or leakage, which may pose a fire risk or lead to personal injury.

• Dispose of the battery in accordance with local laws and regulations.

• Keep the battery away from children and pets.

• When the remote control will not to be used for an extended period, remove the batteries.

2. Rear Covers

• Remove the two plastic covers on the rear of the TV before attaching cables.

• Replace the covers as desired.

3. Connect Antenna, Cable, Video, S-Video, and/or YPbPr Cables

Connect video and audio cables from compatible devices to the back panel of the LCD TV.