Cleaning the LCD TV ...........................................................................................................................................4
4. Connect Power Cable.................................................................................................................................10
5. Turn Power On...........................................................................................................................................10
6. Programming TV Channels........................................................................................................................11
Front View of the Product...................................................................................................................................12
Remote Control ...................................................................................................................................................14
TV OSD Menu ....................................................................................................................................................15
Image Menu ....................................................................................................................................................15
Audio Menu ....................................................................................................................................................16
Color Menu.....................................................................................................................................................16
TV Menu.........................................................................................................................................................17
Miscellaneous Menu .......................................................................................................................................17
V-Chip and Parental Control Menu ................................................................................................................18
Video OSD Menu................................................................................................................................................19
PC OSD Menu ....................................................................................................................................................20
Image Menu ....................................................................................................................................................20
Audio Menu ....................................................................................................................................................21
Color Temp Menu...........................................................................................................................................21
Miscellaneous Menu .......................................................................................................................................22
INFO Menu.....................................................................................................................................................22
PC DVI OSD Menu ............................................................................................................................................22
PIP function Menu ..............................................................................................................................................23
Auto Adjustment .................................................................................................................................................23
Input Source not found or Out of Range.............................................................................................................24
No power ........................................................................................................................................................26
Power is ON but no screen image...................................................................................................................26
Wrong or abnormal colors ..............................................................................................................................26
Snow appears on screen..................................................................................................................................26
No sound.........................................................................................................................................................26
Remote control does not work........................................................................................................................26
Remote control code not found in “universal” remote ...................................................................................26
How do I find more help? ...............................................................................................................................26
1
IMPORTANT PRODUCT SAFETY
INSTRUCTIONS
Read carefully and follow all warnings and instructions in this User's Manual and those
marked on the product before you operate your television. Failure to follow warnings can
result in personal injury or damage to product. Keep this User’s Manual in a convenient
location for future reference.
Proper Positioning of Television
Always handle your LCD television with care. Avoid touching the LCD screen. Skin oils are
difficult to remove.
Always position your LCD television on a stable and level surface. Unstable surfaces can
cause your LCD to topple and fall, resulting in possible damage or injury.
Avoid exposing the LCD display to direct sunlight or high temperatures, which can damage or
shorten its useful life. Do not place near heat sources such as radiators, heat registers, or
other appliances that generate heat.
Avoid exposing the LCD display to rain, water, moisture or high humidity. Do not place your
LCD near basins or sinks where it may come in contact with water.
Orient your LCD display away from direct sunlight to reduce glare.
Never place heavy or sharp objects on the LCD display, video cable, or power cord.
Overloading Outlets
Do not overload electrical power sources when installing television. Overloading wall outlets,
circuits, or extension cords can result in overheating, fire, or electric shock. Use only
grounded or polarized outlets.
Power Cord Protection
Minimize wear on power supply cords. Power supply cords should be routed away from foot
traffic and contact with other objects. Do not route power cord under rugs or carpeting.
The cord should never be severely bent, pinched, or twisted. Periodically inspect power
cords for wear or damage, particularly near plug and the point where it exits from the product.
Unplug cord and discontinue use if damage is discovered.
Ventilation
Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable
operation of the product and to protect it from overheating, these openings must not be
blocked or covered. Keep the LCD TV a minimum of four (4) inches away from any wall to
assure sufficient airflow and ventilation. Increased temperatures may cause fire or device
failure.
2
To assure proper ventilation, do not block the openings by placing the LCD TV on a bed, sofa,
rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or an
enclosed rack, unless proper ventilation is provided.
Other Notices and Precautions
Caution
LCD TV contains high-voltage parts. You may be seriously injured if you touch them.
Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairs by
anyone not authorized by Westinghouse Digital. Refer all servicing and repairs to qualified
service personnel.
If smoke, abnormal noise, or strange odor is present, immediately unplug the power cord.
Contact a qualified service technician
If your LCD TV will not be used for extended periods of time, unplug the power cord and
remove the batteries from the remote control.
: Never remove the rear cover. There are no user serviceable parts inside. Your
3
Antenna Installation Safety
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable
system is grounded so as to prevent voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANS/NFPA 70, provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
Lightning
For added protection for the LCD TV during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and power-line surges. Do not disconnect the
antenna or the power cord during a heavy storm – lightning may strike while you are holding the cable
cord, causing serious injury. Turn off your LCD display and wait for the weather to improve.
Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits. When installing an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits as contact with them may be fatal.
Cleaning the LCD TV
• MAKE SURE THE LCD TV IS TURNED OFF
• NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN OR CASE
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner
onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild
non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on the
LCD TV screen or case. Some chemical cleaners have been reported to damage the screen and/or
LCD display case. Westinghouse Digital will not be liable for damage resulting from use of any
ammonia or alcohol-based cleaners.
4
Safety Guidelines
Warning: This device must be operated with the original power supply.
CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible.
CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for
the individual country. Some examples are listed below:
Germany……….VDE Japan ...............Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of destination
and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original
cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1 below):
Figure A1Figure A2
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled.
For units that are mounted on a desk or table, type SVT or SJT cord sets may be used. For units that sit on the
floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for your
unit. Please consult the table below for the selection criteria for power cords used in the United States and
Canada.
Cord TypeSize of Conductors in CordMaximum Current Rating of Unit
SJT18 AWG
16 AWG
14 AWG
SVT18 AWG
17 AWG
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and may cause harmful interference to radio
communications if not installed and used in accordance with the instructions. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord and the provided
shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded
BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by Westinghouse Digital
will void the user's authority to operate this device.
5
Installation
Congratulations on your purchase of a Westinghouse 19” wide screen LCD TV. Sleek and
practical, this lightweight LCD TV delivers a crisp, vibrant picture and doubles as a superb
WSXGA+ computer monitor —making it a practical solution for tight spaces in the office,
bedroom, or kitchen. Watch television, play video games, e-mail, or surf the Internet.
Package Contents
Your LCD TV package includes:
• 19” widescreen LCD TV
• Detachable Base Stand
• Remote Control (2 AAA batteries are included)
• AC Power Cord
• D-Sub (VGA) Cable
• 3.5mm Mini-Jack Audio Cable
• Literature
o Quick Connect Guide
o User’s Manual
o Warranty Card
Important
Save the original box and all packing material for future shipping needs.
1. Insert Remote Control Batteries
• Remove the battery cover.
• Insert two “AAA” batteries.
• Re-attach the battery cover.
CAUTION
• Only use AAA batteries as specified.
• Do not mix new and old batteries. This may result in
cracking or leakage, which may pose a fire risk or lead
to personal injury.
• Insert batteries according to (+) and (−) markings.
Inserting the batteries incorrectly may result in
cracking or leakage, which may pose a fire risk or lead
to personal injury.
• Dispose of the battery in accordance with local laws
and regulations.
• Keep the battery away from children and pets.
• When the remote control will not be used for an
extended period, remove the batteries.
6
2. Attach Base Stand to LCD TV
Attach the base stand to the LCD TV stand neck. Align the holes and tabs, press and snap
the base stand into place.
Detachable Base Stand
To detach the base stand, just press on the locking tabs on the bottom of the base stand and
remove the base stand from the stand neck.
7
V
3. Connect Antenna, Video, S-Video, YPbPr, DVI, and VGA
Cables
Connect video and audio cables from compatible devices to the back panel of the LCD TV.
Video Inputs
PC Inputs
Video Inputs
S- Video
Audio-R
Audio-L
ideo
YPbPr
Antenna
Audio-In
PC Inputs
DVI
D-Sub (VGA)
Audio-Out
8
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.