Westinghouse Digital LD-2685 User Manual

TABLE OF CONTENTS

TABLE OF CONTENTS.................................................... i

DIGITAL TELEVISION TRANSITION NOTICE .................. 1

AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN

DIGITAL......................................................................... 1

IMPORTANT INFORMATION .......................................... 2

Warnings.................................................................... 2

NOTICES ................................................................... 3

FCC COMPLIANCE STATEMENT ............................... 4

IMPORTANT SAFETY INSTRUCTIONS ....................... 5

Circuit Overload ......................................................... 6

Power Cord Protection ................................................ 6

Ventilation.................................................................. 6

Safety: Lamp Disposal ................................................ 6

WARNINGS AND PRECAUTIONS ............................... 7

ANTENNA INSTALLATION SAFETY ............................ 8

Lightning .................................................................... 8

Power lines ................................................................ 8

CLEANING THE LED TV............................................. 9

Dolby-Digital Notice .................................................... 9

SRS Trademark Information: ....................................... 9

PACKAGE CONTENTS ................................................. 10

CONTROL PANEL ........................................................ 11

TERMINALS ................................................................. 12

REMOTE CONTROL..................................................... 13

REMOTE CONTROL OPERATION ................................ 14

INSTALLING THE REMOTE CONTROL BATTERIES.. 14

REMOTE CONTROL TRANSMISSION RANGE .......... 14

LED TV BASE .............................................................. 15

INSTALLING THE LED TV BASE .............................. 15

REMOVING THE LED TV BASE ................................ 16

ANTENNA CONNECTION ............................................. 17

OUTDOOR ANTENNA CONNECTION ....................... 17

English

TABLE OF CONTENTS

CABLE TV (CTV/DTV) CONNECTION ....................... 17

EXTERNAL DEVICE CONNECTIONS ............................ 18

POWER CONNECTION ................................................ 20

CONNECTING AC POWER ....................................... 20

INITIAL SETUP ........................................................ 20

BASIC OPERATIONS ................................................... 21

TURNING THE POWER ON AND OFF....................... 21

ADJUSTING THE VOLUME....................................... 21

CHANGING CHANNELS ........................................... 22

SELECTING THE INPUT SOURCE............................ 22

ADJUSTING THE DISPLAY FORMAT........................ 23

ADJUSTING THE LED BACKLIGHT .......................... 23

SETUP MENUS ............................................................ 24

SETUP MENU OPERATION ...................................... 24

PICTURE ................................................................. 25

AUDIO ..................................................................... 29

VIEW MODE............................................................. 33

VIEW MODE (VGA) .................................................. 33

TV PROGRAM.......................................................... 35

SETTINGS ............................................................... 39

WALL MOUNT OPTION ................................................ 50

WALL MOUNT INSTALLATION REMINDERS............. 50

TROUBLESHOOTING................................................... 51

SPECIFICATIONS ........................................................ 54

DIGITAL TELEVISION TRANSITION NOTICE

This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12, 2009. The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. After the switch, analog-only television sets that receive TV programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only broadcasting.

For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see www.DTV.gov. For information on the TV Converter program, and on government coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call the NTIA at 1-888-DTV-2009.

AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN DIGITAL

Este equipo incorpora un sintonizador de televisión digital, lo que le permitirá recibir una programación digital televisada por aire, con una antena adecuada, cuando se terminará la transmisión de alta potencia de la televisión analógica en los Estados Unidos el 12 de Junio de 2009. Ciertos receptores de televisión antiguos, si dependen de una antena de TV, necesitarán un conversor de TV para recibir por el aire una programación digital, pero seguirán funcionando como antes para otros usos (por ejemplo para ver emisoras de TV de baja potencia que todavía transmiten en analógico, para ver películas pregrabadas, o para utilizar sus videojuegos).

Para obtener más información, llame FCC 1-888-CALL-FCC (1-888-225-5322) o refiérase a www.DTV.gov. Para toda información sobre el programa de conversores de TV, y acerca de los cupones del gobierno que se pueden usar para comprarlos, refiérase a www.dtv2009.gov, o llame al NTIA al 1-888-DTV-2009.

English

IMPORTANT INFORMATION

Warnings

To reduce the risk of fire or electric shock:

• Do not expose this product to rain or moisture.

• Do not remove the rear cover. There are no user-serviceable parts inside. Refer all servicing requirements to qualified service personnel.

• The plug should be connected to a mains socket outlet with a protective earthing connection.

The lightning flash with arrowhead inside an equilateral triangle symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation inside an equilateral triangle symbol is intended to alert the user to related operating and maintenance instructions in the user documentation accompanying the product.

WARNING!

This device must be operated with the original power supply.

CAUTION:

The power supply outlet should be located near the LED TV and should be easily accessible.

Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below:

•USA – UL

• Canada – CSA

• Japan – Electric Appliance Control Act

IMPORTANT INFORMATION

Figure A1

Figure A2

NOTICES

Important Notices Concerning Power Cord Selection

The specific power cord for this LED TV is enclosed and has been selected according to the country of destination. Use the enclosed power cord to prevent electric shock. Observe the following guidelines if it is necessary to replace the original cord set, or if there is no cord set enclosed. The female receptacle of the cord set must meet IEC-60320 requirements and should look like Figure A1 below:

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL-listed, and CSA-labeled. For LED TVs that are to be placed on a desk or table, type SVT or SJT cord sets may be used. For LED TVs that are to be placed directly on the floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for the LED TV. Consult the table below for the selection criteria of power cords used in the United States and Canada.

Cord Type Size of Conductor in Cord Maximum Unit Current Rating

SJT

SVT

18 AWG 16 AWG 14 AWG 18 AWG 17 AWG

10 Amps 12 Amps 12 Amps 10 Amps 12 Amps

English

IMPORTANT INFORMATION

FCC COMPLIANCE STATEMENT

This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the LED TV and the receiver.

• Connect the LED TV to an outlet on a circuit separate from to which the receiver is connected.

• If the interference persists even after performing the above measures, consult the Westinghouse Service Center or an experienced radio/TV technician for assistance.

FCC Warning

To assure continued FCC compliance, use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is used, use only a shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by the manufacturer will void the user's authority to operate this device.

IMPORTANT INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

Make sure to note and follow all warnings and instructions marked on the LED TV. Observe the following safety instructions.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

English

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT INFORMATION

Circuit Overload

Do not overload wall outlets, extension cords, or power strips. This can result in a fire or electronic shock.

English

Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords for damage. Install the LED TV near a wall socket outlet where the power cord can be readily accessed.

Ventilation

The slots and openings on the cabinet are provided for necessary ventilation. To ensure reliable operation of the LED TV and to protect it from overheating, these slots and openings must never be blocked or covered.

Never cover the slots and openings with a cloth or other materials.

Do not block the openings by placing the LED TV on a bed, sofa, rug or other similar surface.

Do not place the LED TV in a built-in installation such as a bookcase or a rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

Safety: Lamp Disposal

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the electronic industries alliance at www.eiae.org.

IMPORTANT INFORMATION

WARNINGS AND PRECAUTIONS

• Do not orient the LED TV towards direct sunlight to reduce glare.

• If the LED TV will not be used for a long period of time, unplug the unit and remove the batteries from the remote control.

• Avoid touching the display screen by hand or any object.

• Never remove the rear cover. The LED TV interior contains high-voltage parts. You may be seriously injured if you touch them.

• Always handle the LED TV with caution when moving it.

• Do not install the LED TV in airtight compartments, or in areas where it can be exposed to water or high temperature.

• Ensure that the area around the LED TV is clean and free of moisture.

• Do not place anything on the LED TV that can hinder heat dissipation.

• Do not place naked flame sources, such as lighted candles, on or near the LED TV.

• Do not place anything on the LED TV that can cause liquid to splash on it (e.g. flower vase).

• Do not place heavy objects on the LED TV, audio/video cables, or power cord.

• If the LED TV emits smoke, abnormal noise, or a strange odor, immediately turn it off and contact the Westinghouse Service Center by: – Logging on to www.wde.com. – Contacting the Westinghouse Customer Service at (800) 701-0680. – E-mailing us at service@wde.com.

English

Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70

Antenna lead in wire

Antenna discharge unit (NEC Section 810-20)

Grounding Conductors (NEC Section 810-21)

Grounding clamps

Power service grounding electrode system (NEC Art 250 part H)

Grounding clamps

Electric service equipment

NEC: National Electrical Code

IMPORTANT INFORMATION

ANTENNA INSTALLATION SAFETY

Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Lightning

For added protection for the LED TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. DO NOT disconnect the antenna or the power cord during a heavy storm—lightning may strike while you are holding the cable cord, causing serious injury. Turn off the LED TV and wait for the weather to improve.

Power lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

IMPORTANT INFORMATION

CLEANING THE LED TV

• Make sure the LED TV is turned off and the power cord is disconnected from the power outlet.

• Never spray or pour any liquid directly onto the screen or the case.

To clean the screen:

Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol

based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

Wipe the case with a soft, dry cloth.

2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol

based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Dolby-Digital Notice

English

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

SRS Trademark Information:

• TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc.

• TruSurround HD technology is incorporated under license from SRS Labs, Inc.

SRS TruSurround HD™ creates a truly immersive surround sound experience with rich bass and clear dialog from only two speakers.

English

M4x18 *4pcs M5x16 *1pc

Cover neck Base

PACKAGE CONTENTS

26” LED TV Unit Remote Control (with 2x AAA batteries)

LED TV Base User Manual

Power Cord Warranty Card

ZZZ

C.C.

MTS

Favorite

ENT D

Enter

Input

Vol

TVVideo1HDMI1YPbPr1

PCVideo2HDMI2YPbPr2

RMT-11

AC Adapter Screws for Base

CONTROL PANEL

MENU INPUTVOL CH

B S U

2 V A

Item Description

1. MENU Displays the LED TV setup screen.

2. Volume +/-

3. Channel +/-

4. INPUT

• Adjusts the volume during playback.

• Selects an item on a menu screen.

• Switches the channel during TV viewing.

• Selects an item on a menu screen.

• Selects the video input source.

• Executes a command on a menu screen.

5. Power Toggles the power on and off.

English

TERMINALS

English

SPDIF

HDMI 1

1 2 4 5

HDMI 2

RY - L - R VGAAUDIO INTUNERDC IN

USB

Item Function

1. DC in

2. TV tuner

3. Composite AV input

Connects the AC adapter from this outlet to a power source.

Connects the LED TV to an antenna or cable service.

Connect to an external AV device such as a VCR, DVD player, set-top box, or game system.

4. Audio in Connects to the audio out port of a computer.

5. VGA

6. Audio out

Connects to a computer or other device with a VGA output using a 15-pin VGA cable.

Connect to an audio output device.

7. SPDIF audio out Connects to an external digital audio receiver.

8. HDMI 1/2

Connects to an external AV device such as a VCR, DVD player, set-top box, or game system.

9. USB Service port For service only.

REMOTE CONTROL

Item Description

1. Mute

2. Power

3. Backlight

3 5

20 22 24 26

ZZZ

C.C.

ENT D

Enter

Input

Vol

RMT-11

Favorite

4. MTS

MTS

5. CC

6. Sleep zZz

7. Channel keys Use to key in the channel number.

8. Favorite

9. Enter ENT Executes a channel entry.

10. Menu

11. Return

12. Arrow keys Navigate through the on-screen menus.

15 16

13. Enter

TVVideo1HDMI1YPbPr1

PCVideo2HDMI2YPbPr2

21 23 25 27

14. G

15. Info

16. Input Selects the video input source.

17. Vol +/- Ajusts the system volume.

18. Ch /

19. Aspect ratio

20. YPbPr1

21. TV

22. HDMI1 Selects HDMI1 as the input source.

23. Video1

24. YPbPr2 Not supported.

25. PC Selects VGA as the input source.

26. HDMI2 Selects HDMI2 as the input source

27. Video2 Not supported.

REMOTE CONTROL

Mutes the sound. Press again to toggle the sound back on.

Toggles the TV power on or off. Adjusts the LED screen backlight.

Toggles the Multichannel Television Sound options.

Toggles the closed caption display on or off.

Sets the sleep timer for the LED TV to turn off automatically.

Switches to the favorite channels (for details on how to save a new favorite channel, see

Accesses the LED TV setup menus. Switches to the last selected channel.

Executes a command. Displays the Electronic Program Guide

(EPG). It contains the program information for the channel you’re watching.

Displays the input source or channel information as well as the system date and time.

Switches to other TV channels. Selects the video display format.

Selects VGA-Component as the input source.

Selects TV or HDTV as the input source.

Selects the Composite AV device as the input source.

page 23).

English

REMOTE CONTROL OPERATION

INSTALLING THE REMOTE CONTROL BATTERIES

English

CAUTIONS:

• Only use AAA batteries.

• Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury.

• Insert batteries according to the (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to physical injury.

• Dispose of used batteries in accordance with local laws and regulations.

• Keep batteries away from children and pets.

• When the remote control will not to be used for an extended period, remove the batteries.

Remove the battery cover.

2 Insert the batteries. Make sure the (+) and (–) marks on the batteries match

those inside the compartment.

3 Re-attach the battery cover.

REMOTE CONTROL TRANSMISSION RANGE

Transmission range depends upon the reception angle. The range of coverage is 20° horizontal/vertical at a distance of 10 feet from the LED TV.

MTS

ZZZ

C.C.

Favorite

+ 42 hidden pages