Westell Technologies 36R570 User Manual
ADSL W
IRESPEED PRO
36R570 P
NSTALLATION AND USER GUIDE
I
ROXY ROUTER
36R570
PN 030-300153
March, 2001
©2001 Westell, Inc.
Rev. A
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide (PPPoA)
CONTENTS
ADSL WIRESPEED PRO™ PROXY ROUTER USER GUIDE ........................................................................... 4
IRESPEED PRO
W
ROXY ROUTER OVERVIEW
™ P
................................................................................................ 4
WireSpeed Pro Proxy Router Benefits........................................................................................................ 4
Minimum System Requirements ................................................................................................................. 4
ADSL Signal Filtering .................................................................................................................................. 5
Package Inspection and Contents .............................................................................................................. 5
AFETY
S
............................................................................................................................................................. 5
WIRESPEED PRO™ INSTALLATION ................................................................................................................ 6
Installing on Hollow Drywall Surfaces (Optional)......................................................................................... 6
Single-User Setup ....................................................................................................................................... 6
Multiple-User Setup..................................................................................................................................... 7
Cable Connectors ....................................................................................................................................... 9
LED Indicators........................................................................................................................................... 10
WEBSHARE INSTALLATION UTILITIES SOFTWARE SETUP....................................................................... 11
Running WebShare Installation Utilities .................................................................................................... 11
Running WebShare Installation Utilities for Windows Operating Systems ............................................... 11
Disabling Autodial ................................................................................................................................. 15
SETTING UP YOUR WEBSHARE ACCOUNT ................................................................................................. 16
Account Parameters.................................................................................................................................. 16
Viewing VPI/VCI Parameters ................................................................................................................ 17
Changing VPI/VCI Settings................................................................................................................... 18
Restarting WebShare................................................................................................................................ 19
CONNECTING TO AN ACCOUNT.................................................................................................................... 20
Activating a PPP Session.......................................................................................................................... 20
Disconnecting from a PPP Session ..........................................................................................................23
ONFIGURING WEBSHARE
C
............................................................................................................................... 24
Accessing the WebShare Management Interface .................................................................................... 24
Adding and Configuring Additional WebShare Accounts .......................................................................... 25
THE WEBSHARE MANAGEMENT INTERFACE.............................................................................................. 27
HE MANAGEMENT MENU
T
................................................................................................................................27
The Home Page.................................................................................................................................... 28
Home Page Main Window................................................................................................................ 28
Connections...................................................................................................................................... 28
Connect/Disconnect .........................................................................................................................28
Edit/New ........................................................................................................................................... 28
Status ............................................................................................................................................... 28
Building New Accounts..................................................................................................................... 29
Viewing DNS Primary and Secondary IP Addresses ....................................................................... 29
IAGNOSTICS
D
.................................................................................................................................................. 30
Accessing the Main Diagnostics Page .............................................................................................30
Test All.............................................................................................................................................. 30
Self-Test ........................................................................................................................................... 31
ADSL Modem ................................................................................................................................... 31
PPP Connection ............................................................................................................................... 31
IP Remote Router............................................................................................................................. 32
PING................................................................................................................................................. 32
030-300153A ii
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
HE NEW SOFTWARE INSTALLATION PAGE
T
T
HE
LAN A
DVANCED PAGE
.............................................................................................................................. 34
....................................................................................................... 33
Accessing the LAN Advanced Configuration Dialog Box ................................................................. 34
IP Address ........................................................................................................................................ 35
Subnet Mask..................................................................................................................................... 35
Domain Name System (DNS) Primary............................................................................................. 35
Domain Naming System (DNS) Secondary ..................................................................................... 35
Dynamic Host Configuration Protocol (DHCP)................................................................................. 35
DHCP Base Address ........................................................................................................................ 35
DHCP End Address.......................................................................................................................... 35
Inactivity Timer Timeout ................................................................................................................... 36
IREWALL
F
........................................................................................................................................................ 37
Inbound/Outbound Traffic................................................................................................................. 37
Firewall Security........................................................................................................................................ 37
Security Levels...................................................................................................................................... 38
Setting the Security Level ..................................................................................................................... 38
Custom Settings ............................................................................................................................... 38
Saving Changes.................................................................................................................................... 38
Firewall Port Forwarding ........................................................................................................................... 39
Additional Protocol Support .................................................................................................................. 39
Enabling/Disabling Port Forwarding...................................................................................................... 39
Deleting a Service................................................................................................................................. 40
Adding a Service................................................................................................................................... 40
Firewall Custom Access Security.............................................................................................................. 42
The Advanced Access Panel ................................................................................................................ 42
Access Lists .......................................................................................................................................... 43
The Universal List ................................................................................................................................. 43
Creating a New Access List .................................................................................................................. 44
Adding a Service................................................................................................................................... 44
Deleting a Service................................................................................................................................. 45
Optional Access Restrictions ................................................................................................................ 45
Turning the Firewall Off............................................................................................................................. 46
HE WEBSHARE ABOUT PAGE
T
EBSHARE HELP
W
............................................................................................................................................ 47
......................................................................................................................... 47
TROUBLESHOOTING....................................................................................................................................... 48
WebShare Error Messages....................................................................................................................... 48
Resetting to Factory Default...................................................................................................................... 49
RODUCT ASSISTANCE AND GENERAL INQUIRIES
P
.............................................................................................. 50
Product Return .......................................................................................................................................... 50
RODUCT SPECIFICATIONS
P
.............................................................................................................................. 51
APPENDIX......................................................................................................................................................... 53
AC AND LINUX SUPPORT
M
IREWALL SERVICES SUPPORTED
F
................................................................................................................................53
.................................................................................................................... 53
Medium Security: List of Services Allowed .......................................................................................... 53
High Security: List of Services Allowed................................................................................................ 54
List of Services Supported by Port Forwarding..................................................................................... 54
LICENSING AND REGULATORY INFORMATION........................................................................................... 57
030-300153A iii
ADSL WireSpeed Pro 36R570 Proxy Router
ADSL WIRESPEED PRO™ PROXY ROUTER USER GUIDE
User Guide
IRESPEED PRO
W
WireSpeed Pro is the perfect solution for a low cost multi-user residential or small business network.
Westell’s WireSpeed Pro provides multiple users with reliable, high-speed, Internet access for home or
office. With Westell’s WireSpeed Pro, you won’t need additional phone or data lines. The WireSpeed
Pro converts an existing phone line into a dedicated, high-speed connection ending the inconvenience of
dial-up modems and busy signals. Unlike traditional analog modems, multiple users can share the same
phone line for simultaneous voice/fax communications and high-speed Internet access. WireSpeed Pro’s
downstream data rates of 8 Mbps and upstream rates of 800 kbps, may be up to 140 times faster than a
56K analog modem.
With WireSpeed Pro, you’ll never be out of date. WireSpeed Pro is factory-configured with Westell's popular WebShare
networking software. Our latest generation of WebShare software implements new features like an integrated firewall and
VPN support. With easy downloads from Westell’s WebStore, you’ll be able to upgrade your WebShare software to take
advantage of the latest innovations and features from Westell.
The WireSpeed Pro uses the widely popular Point to Point Protocols (PPPoA and PPPoE) to connect to your Internet
service provider (ISP). LAN network setup is a breeze with Network Address Translation (NAT) and Dynamic Host
Control Protocol (DHCP). With NAT, the Internet sees your Westell WireSpeed Pro as a single IP address. This hides the
IP addresses of the PCs on the LAN from the Internet and provides a simple form of network security. With DHCP,
WireSpeed Pro automatically assigns an IP address to each PC on the network, removing the chore of local IP address
management.
ROXY ROUTER OVERVIEW
™ P
WireSpeed Pro Proxy Router Benefits
• Up to 253 users can share a single Internet connection
• No need to tie up a PC to serve as a router
• No need to pay for multiple IP addresses
• No need to load Point to Point Protocol (WebShare) on each of the networked PCs
• Retains the IP addresses of your existing LAN
Minimum System Requirements
The following requirements outline the minimum system for WebShare:
• Pentium 166 MHz processor or equivalent
• Microsoft Windows 98, Windows Millennium, Windows 2000, or Windows NT 4.0
• Internet Explorer 4.x or Netscape Navigator 4.x installed
• At least 16 MB RAM
• 5 MB of free hard drive space
• Ethernet connection between upgrading PC and ADSL modem
• TCP/IP protocol stack installed
• Multi-port Ethernet 10Base-T hub (for multiple users)
• VGA monitor
• Cross over Ethernet cable for modem to Ethernet hub
• VPI/VCI values (provided by your service provider)
• PPPoA/PPPoE support (provided by your service provider)
030-300153A 4 WireSpeed Pro Overview
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
ADSL Signal Filtering
ADSL signals must be blocked from reaching each telephone, answering machine, fax machine, conventional computer
mode or any similar conventional devices. Failure to do so may degrade telephone voice quality and ADSL performance.
There are two ways to block the ADSL signal from telephone equipment:
Method 1. Microfilters. Install a microfilter at each telephone jack being used for a phone, answering machine,
fax machine or other telephone device. Microfilter installation is simple and requires no tools or telephone
rewiring. Just unplug the telephone device from the baseboard or wall mount and snap in a microfilter, then snap
in the telephone device. Contact Westell to obtain a microfilter kit (Westell part number A90-36FK201) which
contains multiple microfilters for your installation.
Method 2: POTS Splitter. Install a POTS splitter (Westell model 32RTPSGNA1) at the telephone service entry
point. Installation of a POTS splitter may require telephone rewiring, therefore, POTS splitter installation is
typically performed by your service provider. If you choose to use a POTS splitter, contact your telephone
company or service provider for installation.
Package Inspection and Contents
Upon receipt, thoroughly inspect the unit for damage. If the unit has been damaged during transit, report the damage
immediately to the Transportation Company and Westell Customer Support. The transportation carrier assumes
responsibility for safe delivery of goods.
The WireSpeed Pro Proxy Router is shipped with a power supply and straight-through Ethernet cable.
You may have to supply the following cables:
• 10Base-T crossover cable with RJ-45 connectors for Ethernet hub to WireSpeed Pro Proxy Router connection
• RJ-11 modular cable for phone line to WireSpeed Pro Proxy Router connection
AFETY
S
Follow these safety precautions before installing any electronic equipment:
1. Never install any telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the
network interface.
4. Use caution when installing or modifying telephone lines.
5. This equipment is to be installed and used with approved telco terminal sockets that provide primary lightning
protection.
WARNING
Risk of electric shock. Voltages up to 140 Vdc (with reference to ground) may be present
on telecommunications circuits.
030-300153A 5 WireSpeed Pro Overview
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
WIRESPEED PRO™ INSTALLATION
The WireSpeed Pro Proxy Router operates up to 300 feet (91.4 meters) from a PC or Ethernet hub over 100-Ohm, Category
5 cable.
For installation on a wall surface, follow the instructions below. If you are not installing the unit on a wall surface, proceed
to the section on Single or Multiple-User Setup.
Installing on Hollow Drywall Surfaces (Optional)
To mount the WireSpeed Pro to a wall:
1. Obtain two pan-head screws (one #8 and one #6) and two #4 - #8 wall anchors (not provided).
2. Place the WireSpeed Pro against the wall where it is to be mounted, note and mark the upper keyhole slot and screw
location.
3. Drill a 3/16” hole for the upper anchor and insert the anchor and larger (#8) screw until the face of the screw is
approximately 3/16” from the wall.
4. Test fit the unit on the screw, and adjust the screw depth for a sliding fit.
5. With a pencil, mark the opening in lower mounting tab. Remove the unit from the wall.
6. Drill a 3/16” hole for the lower anchor and insert anchor. Hang the unit on the upper screw.
7. Insert the smaller (#6) screw through the hole in the lower mounting tab.
8. Tighten the lower screw lightly with a screwdriver. Do not overtighten.
Single-User Setup
Refer to the wiring diagrams shown in Figure 1 and Figure 3.
1. Connect the power supply cord to the power connector on the side of the unit and plug it into the wall power receptacle.
2. Connect a standard RJ-11 telephone cable from the LINE connector to the ADSL-equipped phone line.
3. Connect the straight 10Base-T cable (included with this package) to the ETHERNET connector on the side of the unit
to the interface on the computer. A crossover cable may be required when connecting to other equipment, such as an
Ethernet hub. (See “Multiple-User Setup” below.)
4. Turn the power switch ON.
5. The Ready LED should be a solid green indicating that the power self-test has successfully completed and the unit is
synchronized with the ADSL line card. It may take up to 70 seconds for the unit to synchronize with the central office
ADSL unit.
030-300153A 6 WireSpeed Pro Installation
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
6. The Link LED should be solid green indicating that the CPE connection has been made.
7. During use, a pulsing yellow Activity LED indicates that data is being transmitted and received on the Ethernet
interface.
8. Proceed to page 16, “Setting Up Your WebShare Account” to configure the software.
ADSL LINE
ON/OFF
SWITCH
POWER
CONNECTOR
ETHERNET
Figure 1. WireSpeed Pro Single-User Setup Connections
Multiple-User Setup
Refer to the wiring diagrams in Figure 2 and Figure 3.
1. Connect the power supply cord to the power connector on the side of the WireSpeed Pro and plug into a power
receptacle.
2. Connect a standard RJ-11 telephone cable from the LINE connector to the ADSL-equipped phone line.
3. Obtain a multi-port Ethernet Hub (available separately). Ensure that the hub includes enough Ethernet ports to
meet the requirements of the network.
4. Connect the straight 10Base-T cable (included with this package) to the jack labeled ETHERNET on the side of
the unit to the jack-designated uplink on the Ethernet Hub. With some Ethernet Hubs, a crossover cable (available
separately) may be required. Please see the documentation included with the selected Ethernet hub.
5. Connect each additional PC to the Ethernet hub.
6. Turn the power switch ON.
030-300153A 7 WireSpeed Pro Installation
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
7. The Ready LED should be a solid green indicating that the power self-test has successfully completed and the unit
is synchronized with the ADSL line card. It may take up to 70 seconds for the unit to synchronize with the central
office ADSL unit.
8. The Link LED should be solid green indicating that the CPE connection has been made.
9. During use, a pulsing yellow Activity LED indicates that data is being transmitted and received on the Ethernet
interface.
10. Go to page 16, “Setting Up Your WebShare Account” to configure the software.
PC
PC
PC
All connections made with
10BaseT Straight-through
cable with RJ45 plug
terminations
UPLINK
PORT 1
PORT 2
PORT 3
PORT 4
ETHERNET HUB
PRINTER
Figure 2. Typical WireSpeed Pro Multi-User Setup Connections
030-300153A 8 WireSpeed Pro Installation
ADSL WireSpeed Pro 36R570 Proxy Router
p
g
User Guide
Cable Connectors
There are connectors on the side panel of the WireSpeed Pro (Figure 3) for Power, an ON/OFF switch, 6-pin RJ-11 DSL
(LINE) connector and 8-pin RJ-45 ETHERNET connector for customer terminal equipment. Tables 1-3 list the connector
types and pinout designations.
10Base-T
CONNECTOR
O
I
LINE
ETHERNET
DSL CONNECTOR
POWER
SWITCH
POWER
CONNECTOR
Figure 3. WireSpeed Pro Proxy Router (Side Panel)
Table 1. WireSpeed Pro Proxy Router Connectors
Connector Name Connector Type Description
LINE 6-pin (RJ-11) modular jack POTS/DSL is used to connect the telephone jack
with ADSL
POWER 3-pin mini-DIN connector Connects power cord
ETHERNET 8-pin (RJ-45) jack Connects to PC or 10BaseT hub
Table 2. LINE Connector Pinouts
LINE Pinouts (RJ-11)
Pin #
1, 2, 5, 6 Not Used
3DSL Ti
4DSL Rin
Table 3. ETHERNET Connector Pinouts
ETHERNET Pinouts (RJ-45)
Pin #
1Rx+
2Rx3Tx+
4, 5, 7, 8 Not Used
6Tx-
030-300153A 9 WireSpeed Pro Installation
ADSL WireSpeed Pro 36R570 Proxy Router
LED Indicators
The LED indicators shown in Figure 4 are used to verify the unit’s operation and status.
User Guide
Connections are
located on the side
Figure 4. WireSpeed Pro Proxy Router (Front)
LED State Description
POWER
READY
Solid Green Power ON
No Light
No power
Slow Flashing Green Power ON and passed power-up diagnostics (1 flash/sec)
Moderate Flashing Green Power ON and attempting synchronization (2 flashes/sec)
Solid Green Power ON and synchronized with the ADSL line card
Solid Red Hardware power-up in progress
Blinking Red Unit failed power-up diagnostic
Alternating Red/Green Proxy Router diagnostic failed
No Light No power
LINK
Solid Green Link established
No Light No 10Base-T link
ACTIVITY
Pulsing Yellow Data being transmitted. Pulses should match the
reception or transmission of Ethernet data.
No Light No data on Ethernet interface
Power
Ready
Link
Activity
Table 4. LED States
Modem LEDs will flash while powering up. This intermittent flashing should not be confused with actual operation
Note:
status.
030-300153A 10 WireSpeed Pro Installation
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
WEBSHARE INSTALLATION UTILITIES SOFTWARE SETUP
Running WebShare Installation Utilities
Account parameters must be added to WebShare before connecting to your ISP or Corporate LAN. Use the Westellprovided WebShare Installation Utilities to simplify the setup of the following:
• Selection of the desired Ethernet adapter (in instances where more than one Ethernet adapter exists on the PC).
• Automatic enabling of DHCP
• Automatic assignment of the WebShare gateway address of 192.168.0.1
• Simplified service provider account information installation via the Account Install screen.
We recommend using the WebShare Installation Utilities to automatically configure DHCP on each Windows PC in a
multiple-PC environment. Alternatively, DHCP may be enabled manually on Windows computers. Macintosh and Linux
users must use manual configuration to enable DHCP on their systems.
Operating System: DHCP Configuration:
Windows Automatic or manual
Macintosh Manual
Linux Manual
Macintosh and Linux users may access the WebShare Home Page by entering the URL of 192.168.0.1 in their browser
Address/Location field.
Running WebShare Installation Utilities for Windows Operating Systems
To install WebShare Installation Utilities on your computer, insert the WebShare Installation Utilities CD into the CD-ROM
drive. The CD should run automatically. If it does not, click
E:\win32\setup.exe (where “E” is the designation of the CD-ROM drive)
1. Follow the installation wizard. Figure 5 shows the
Welcome
Start
>
Run
window.
from the taskbar and type the following line:
Figure 5. Welcome Window
2. Click
3. Read the license agreement, then click
030-300153A 11 WebShare Account Setup Installation
Next
. The
License Agreement
window appears.
if you accept the agreement. The
Yes
Function Selection
screen appears.
Figure 6
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
4. On the
Function Selection
screen, three options are available:
Figure 7. Function Selection
CAUTION
Do not select the default option!
5. Select the second option,
Option 1,
Note:
3,
IP Reset utility for WebShare
6. Click
030-300153A 12 WebShare Account Setup Installation
Next
.
Setup PC only
Download WebShare modem software
.
, is the default and is for software upgrades only. Option
is used to restore modem settings to WebShare defaults.
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
7. The
8. Click
adapter.)
Choose Destination Location
. The
Next
Choose Adapter
window (Figure 8) shows where the application will be stored on your hard drive.
Figure 8. Choose Destination Location
window appears. (
: This screen will NOT appear if your computer has only one
Note
Figure 9. Choose Adapter
9. Click the option button for your network adapter, then click
NOTE:
window displaying multiple adapters. Be sure to select the physical adapter that is connected to your ADSL modem.
10. The
030-300153A 13 WebShare Account Setup Installation
If you have multiple Ethernet adapters, select the one to be used with the WireSpeed Pro. Figure 9 shows a
Setup Complete
window appears. Setting changes will not take effect until the computer has been restarted.
Next
.
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
11. Select
Note:
12. Click
Yes I want to restart my computer now
Before clicking Finish, remove the Westell CD-ROM from the CD-ROM drive.
to restart your computer.
Finish
to restart the PC.
Figure 10. Setup Complete
This completes the basic installation. When your computer restarts, the WebShare Home Page will appear. If you do not
wish to set up a WebShare account at this time, you may open the WebShare Home Page by clicking on the WebShare icon
on your desktop.
Windows Internet Explorer users should proceed to the next page for instructions on
disabling the autodial feature.
NOTE
030-300153A 14 WebShare Account Setup Installation
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
Disabling Autodial
(For Internet Explorer users.) A browser is typically set to dial into an ISP connection automatically when the browser is
launched. In order to access the Internet through your “always-on” ADSL line, the autodial feature must be disabled.
Dial-Up Settings
Your Connection dial-up setting must be set to
Never dial a connection
. Follow this procedure to verify and/or change
your dial-up setting:
1. Click
2. From the
3. The
4. In the
>
Start
Settings
Control Panel
Internet Options
Dial-up settings
, click
Control Panel
screen, double-click
screen appears. Click the
.
Internet Options
Connections
box, make sure that the option button for
.
tab.
Never dial a connection
is selected. NOTE: If
the Dial-up Settings box is dimmed (grayed out) it means you have not yet set up any connections. If this is the
case, you do not need to change any settings.
5. Click OK.
Select
“Never dial a connection”
to disable the autodial feature.
Figure 11. Internet Options Screen (Internet Explorer 5)
030-300153A 15 WebShare Account Setup Installation
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
SETTING UP YOUR WEBSHARE ACCOUNT
This section shows you how to set up your initial WebShare account. The WebShare account is your link to your ISP. The
WebShare Home Page will appear during installation after the computer restarts. It may also be started by clicking on the
WebShare icon on the desktop or by opening the browser and typing the URL as indicated in the procedure below.
In a LAN or multiple-PC environment, account setup only needs to be done on the
computer connected to the WireSpeed Pro. Once an account has been created, it is
accessible to all users on the LAN.
Account Parameters
Account parameters are required before connecting to your service provider. The account parameters to be entered in the
Account Install window are obtained from your service provider.
parameters.
The Account Description is a word or phrase created by the user to identify the account. It is used by WebShare to
coordinate with the service provider. For example, the following parameters were obtained from a service provider:
User ID: Snape@inet
Password: ******
NOTE
User ID
and
Account Description
are the only required
With the following user-defined input:
Account Description: Account 2
Procedure:
1. Open your Internet browser. In the address bar (location bar), type
WebShare Home Page containing PPP Status and PPP Connections windows appears.
192.168.0.1
and press ENTER. The
Figure 12. WebShare Home Page
2. Under
030-300153A 16 Setting Up Your WebShare Account
PPP Connections
appears.
of the WebShare Home Page, click
New…
The
Configure Account
window
ADSL WireSpeed Pro 36R570 Proxy Router
Figure 13. Configure Account Window
User Guide
3. In the
4. In the
5. Click
Viewing VPI/VCI Parameters
Your service provider will provide you with a VPI (Virtual Path Indicator) and VCI (Virtual Channel Indicator) which are
path assignments for your ADSL connection. WebShare defaults to
settings, select
The WebShare
WireSpeed Pro is shipped with VPI/VCI preset for your area. If these need to be changed, contact your service provider for
the correct settings and follow the instructions on the next page.
Description
User ID
. The new account will now appear in the WebShare
Save
LAN Advanced
LAN Advanced Configuration
field, type the account description you have chosen to call this connection.
field, type the user ID given to you by your service provider.
window.
. To verify your VPI/VCI
VPI = 0
from the WebShare Home Page Menu.
window (Figure 14) displays the current configuration settings.
PPP Connections
and
VCI = 35
030-300153A 17 Setting Up Your WebShare Account
ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
VPI/VCI settings
Figure 14. LAN Advanced Configuration Window
Changing VPI/VCI Settings
CAUTION
Do not change your VPI/VCI settings unless instructed to do so by your service provider!
Current VPI/VCI settings are located on the LAN Advanced window. (See Figure 14.) To change them, type the correct
numbers in the fields provided and click the Save button at the bottom of the screen. The setting change will not take place
until the modem/router has restarted. Follow the on-screen instructions.
Congratulations! You have just configured your first account.
Connecting to an Account
connection. If you would like to add additional accounts at this time, refer to
WebShare Accounts
later in this manual.
Adding and Configuring Additional
shows how to establish a
030-300153A 18 Setting Up Your WebShare Account
Loading...